CNC-Bits (5 Bits)
CNC-Bits (5 Bits)
CNC-Bits (5 Bits)
CNC-Bits (5 Bits)

CNC-Bits (5 Bits)

Normaler Preis €14,99
/

133 auf Lager

Bestellungen werden innerhalb von 3 - 5 Werktagen nach Zahlungsbestätigung versandt. Wenn Ihre Bestellung zusammen mit dem Snapmaker 2.0 aufgegeben wird, wird sie mit Ihrem Snapmaker 2.0 ausgeliefert.

Fünf (5) CNC-Bits

Dieses Paket enthält fünf CNC-Bits (Schaftdurchmesser: 3,175 mm):

  • Flachschaftfräser, zweiseitig schneidend (Schnittdurchmesser: 3,175 mm) 
  • Flachschaftfräser, einseitig schneidend (Schnittdurchmesser: 3,175 mm)
  • Flachschaftfräser, einseitig schneidend (Schnittdurchmesser: 1,5 mm)
  • Kugelschaftfräser
  • V-Bit (Schnitz-Bit für Holz)

CNC Bits (5 bits)

High precision

Wide compatibility

Wear resistant

High precision

Wide compatibility

Wear resistance

Beschreibung

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Flachschaftfräser

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Kugelschaftfräser

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Flachschaftfräser
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Kugelschaftfräser
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Vorzeigeprojekte

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Spezifikationen


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "


Flat End Mill (double cut 1.5)

Kugelschaftfräser



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "


Carving V-bit



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008"
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

Customer Reviews

Based on 62 reviews
82%
(51)
10%
(6)
5%
(3)
0%
(0)
3%
(2)
M
Micha Fritz
Perfect !

Perfect ! Very good product

C
Chantal Gingras
Vert good product

Vert good product

N
Nick Roberts

Great to have a selection of bits in one set!

T
TheNorseman
CNC Bits for Snapmaker 2.0

I have been testing the 5 bits from Snapmaker on my machine and they works perfectly. There is not much else to say about them rater then that they works great.

P
Peter McClay
Panther

These cutters work fine in the Snapmaker. It would be great to be able a buy 5 off of each individual shapes/sizes not just a mixed set.