Featured Collection


Find the right Snapmaker 3D printer for you

Find the right Snapmaker 3D printer for you

J1

A350T/A250T

Artisan

High Speed IDEX

3-in-1

3-in-1

MSRP:
$1399

MSRP:
$1499~$1799

MSRP:
$2999

Grundlegende Informationen

Standard 3D Printing Function

Independent Dual Extrusion (IDEX)

Einzel-Extrusion

Doppelextrusion


Standard Laser Function

-

1600mW

10 W


Standard CNC Function

-

50W

200 W


Standard Enclosure

Equipped

Equipped

Equipped


Arbeitsbereich
(W × D × H)

Default Mode & Backup Mode:
300mm x 200mm x 200mm

Copy Mode:
160mm x 200mm x 200mm

Mirror Mode:
150mm x 200mm x 200mm

Einzelextrusionsmodul:
230 × 250 × 235 mm (A250T)
320 × 350 × 330 mm (A350T)

Dual Extrusion:
350 × 400 × 400 mm


Enclosure Dimensions
(W × D × H)

539 × 401 × 464 mm

624 × 530 × 507 mm (A250T)
820 × 626 × 603 mm (A350T)

665 × 943 × 705 mm


Maximale Druckgeschwindigkeit

350 mm/s

100 mm/s

300 mm/s


Maximum Acceleration

10,000 mm/s2

1,000 mm/s2

2,000 mm/s2


Maximum Nozzle Temperature

300°C

275°C

300°C


Nennleistung

400W

320W

350W + 400W


Software

Luban

Luban

Luban


Erweiterungsfähigkeit

Gehäuse

-

Equipped

Equipped


-

Equipped


-

Equipped


-


-

Built in


-


-


Schnellwechseldesign

-

×(Available Soon)


Motion System

Motortreiber-Chip des Linear-Moduls

TMC2209

TMC2209

TMC2209


Führung der X-Achse

40 mm

20 mm

40 mm


Führung der Y-Achse

40 mm

20 mm

40 mm


Führung der Z-Achse

2 mm

8 mm

8 mm


Transmission System

Industrial Linear Rail

Lead Screw

Embedded Steel Guiderail


3D-Drucken

Bauplatte

PEI-beschichtetes Glas

Steel Plate with PC
Aufkleber auf beiden Seiten

PEI-beschichtetes Glas


Supported Nozzle
Durchmesser

Standard:
0.4 mm Brass Nozzle ×2
Optional:
0.2 mm Brass Nozzle,
0,6 mm Messingdüse,
0.8 mm Brass Nozzle,
0,4 mm gehärtete Düse

Standard:
0,4 mm Messingdüse

Standard:
0.4 mm Brass Nozzle ×2
Optional:
0.2 mm Brass Nozzle,
0,6 mm Messingdüse,
0.8 mm Brass Nozzle,
0,4 mm gehärtete Düse


Hochtemperaturzone

×

×

260 mm × 260 mm


Zonenheizung

×

×


Heating Speed of
Heizbett

Aufheizen bis zu
60°C in 4 min

Aufheizen bis zu
60°C in 4 to 5 min

High-temperature Zone:
Heating up to 60°C in 2 to 3 min
The Whole Heated Zone:
Heating up to 60°C in 4 to 5 min


Maximum Temperature
des beheizten Bettes

100°C

100°C (A250T)
80°C (A350T)

Hochtemperatur
Zone: 110°C
Outer Zone: 80°C


Unterstützte Materialien

PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF

PLA, ABS, PETG, TPU

PLA, ABS, PETG, TPU, PVA,
Breakaway PLA, HIPS,
PA-CF, PA-GF, ASA


Lasergravieren und -schneiden

1.600 mW Lasermodul

-

Equipped

Optional


10 W Laser-Modul

-

Optional

Standard


Maximum
Graviergeschwindigkeit

-

15 mm/s

100 mm/s


Maximale Schnitttiefe

-

1,5 mm Paulownia

8 mm Paulownia


Standardkamera

-

Kein Weitwinkel

Weitwinkel


Supported
Gravur-Materialien

-

Lindenholz, Paulownia, Kiefer, Sperrholz, Bambus, Leder, Textil, Papier, dunkles Acryl (blau ausgeschlossen)

Lindenholz, Paulownia, Kiefer, Sperrholz, Buche, Nussbaum, Bambus, MDF, lackiertes Metall, kupferbeschichtetes Laminat, Zinnblech, rostfreier Stahl, eloxiertes Aluminium, dunkles Glas, Schiefer, Keramik, Jade, Marmor, Schiefergestein, Leder, Textil, Leinwand, Wellpappe, Pappe, Kunststoff, dunkles Acryl (blau ausgeschlossen)


Supported Cutting
Materialien

-

Lindenholz, Paulownia, Kiefer, Sperrholz, Papier, dunkles Acryl (blau ausgeschlossen)

Lindenholz, Paulownia, Kiefer, Sperrholz, Buche, Nussbaum, Bambus, MDF, Leder, Textil, Leinwand, Wellpappe, Pappe, Kunststoff, dunkles Acryl (blau ausgeschlossen)


Work Area (W × D)

-

230 × 250 mm (A250T)
320 × 350 mm (A350T)

400 × 400 mm


CNC-Schnitzen

50 W CNC-Modul

-

Equipped

Optional


200 W CNC-Modul

-

Nicht kompatibel

Equipped


Maximale Spindeldrehzahl

-

12.000 U/min

18.000 U/min


Maximale Arbeitsgeschwindigkeit[1]

-

Buche: 16 mm/s
Acryl: 10 mm/s

Buche: 50 mm/s
Acryl: 33 mm/s


Maximale Abstufung

-

Buche: 1 mm
Acryl: 0,5 mm

Buche: 2 mm
Acryl: 1 mm


Unterstützte Materialien

-

Hartholz (Buche, Nussbaum), Weichholz, Acryl, PCB, Kohlefaser, Jade

Hartholz (Buche, Nussbaum), Weichholz, HDF, MDF, Sperrholz, Jade, Karbonfaser, Acryl, Epoxid-Werkzeugbrett, PCB


Work Area (W × D × H)

-

230 × 250 × 180 mm (A250T)
320 × 350 × 275 mm (A350T)

400 mm × 400 mm × 400 mm


[1] Diese Daten wurden beim Schneiden von Buche mit einem zweischneidigen 3,175-mm-Flachfräser und von Acryl mit einem einschneidigen 3,175-mm-Flachfräser ermittelt. Je nach den verwendeten CNC-Fräsern und Materialien kann die Schnittgeschwindigkeit variieren.

We are here to help

Please feel free to contact us if you have any questions or concerns! info@snapmaker.com

J1

High Speed IDEX

MSRP: €1699

A350T/A250T

3-in-1

MSRP: €1949~€2349

Artisan

3-in-1

MSRP: €3299

Grundlegende Informationen

 

 

 

Standard 3D Printing Function

Independent Dual Extrusion (IDEX)

Einzel-Extrusion

Doppelextrusion


Standard Laser Function

-

1600mW

10 W


Standard CNC Function

-

50W

200 W


Standard Enclosure

Equipped

Equipped

Equipped


Arbeitsbereich
(W × D × H)

Default Mode & Backup Mode:
300mm x 200mm x 200mm

Copy Mode:
160mm x 200mm x 200mm

Mirror Mode:
150mm x 200mm x 200mm

Einzelextrusionsmodul:
230 × 250 × 235 mm (A250T)
320 × 350 × 330 mm (A350T)

Dual Extrusion:
350 × 400 × 400 mm


Enclosure Dimensions
(W × D × H)

539 × 401 × 464 mm

624 × 530 × 507 mm (A250T)
820 × 626 × 603 mm (A350T)

665 × 943 × 705 mm


Maximale Druckgeschwindigkeit

350 mm/s

100 mm/s

300 mm/s


Maximum Acceleration

10,000 mm/s2

1,000 mm/s2

2,000 mm/s2


Maximum Nozzle Temperature

300°C

275°C

300°C


Nennleistung

400W

320W

350W + 400W


Software

Luban

Luban

Luban


Erweiterungsfähigkeit

 

 

 

Gehäuse

-

Equipped

Equipped


-

Equipped


-

Equipped


-


-

Built in


-


-


Schnellwechseldesign

-

× (Available Soon)


Motion System

 

 

 

Motortreiber-Chip des Linear-Moduls

TMC2209

TMC2209

TMC2209


Führung der X-Achse

40 mm

20 mm

40 mm


Führung der Y-Achse

40 mm

20 mm

40 mm


Führung der Z-Achse

2 mm

8 mm

8 mm


Transmission System

Industrial Linear Rail

Lead Screw

Embedded Steel Guiderail


3D-Drucken

 

 

 

Bauplatte

PEI-beschichtetes Glas

Steel Plate with PC
Aufkleber auf beiden Seiten

PEI-beschichtetes Glas


Supported Nozzle
Durchmesser

Standard:
0.4 mm Brass Nozzle ×2
Optional:
0.2 mm Brass Nozzle,
0,6 mm Messingdüse,
0.8 mm Brass Nozzle,
0,4 mm gehärtete Düse

Standard:
0,4 mm Messingdüse

Standard:
0.4 mm Brass Nozzle ×2
Optional:
0.2 mm Brass Nozzle,
0,6 mm Messingdüse,
0.8 mm Brass Nozzle,
0,4 mm gehärtete Düse


Hochtemperaturzone

×

×

260 mm × 260 mm


Zonenheizung

×

×


Heating Speed of
Heizbett

Aufheizen bis zu
60°C in 4 min

Aufheizen bis zu
60°C in 4 to 5 min

High-temperature Zone:
Heating up to 60°C in 2 to 3 min
The Whole Heated Zone:
Heating up to 60°C in 4 to 5 min


Maximum Temperature
des beheizten Bettes

100°C

100°C (A250T)
80°C (A350T)

Hochtemperatur
Zone: 110°C
Outer Zone: 80°C


Unterstützte Materialien

PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF

PLA, ABS, PETG, TPU

PLA, ABS, PETG, TPU, PVA,
Breakaway PLA, HIPS,
PA-CF, PA-GF, ASA


Lasergravieren und -schneiden

 

 

 

1.600 mW Lasermodul

-

Equipped

Optional


10 W Laser-Modul

-

Optional

Standard


Maximum
Graviergeschwindigkeit

-

15 mm/s

100 mm/s


Maximale Schnitttiefe

-

1,5 mm Paulownia

8 mm Paulownia


Standardkamera

-

Kein Weitwinkel

Weitwinkel


Supported
Gravur-Materialien

-

Lindenholz, Paulownia, Kiefer, Sperrholz, Bambus, Leder, Textil, Papier, dunkles Acryl (blau ausgeschlossen)

Lindenholz, Paulownia, Kiefer, Sperrholz, Buche, Nussbaum, Bambus, MDF, lackiertes Metall, kupferbeschichtetes Laminat, Zinnblech, rostfreier Stahl, eloxiertes Aluminium, dunkles Glas, Schiefer, Keramik, Jade, Marmor, Schiefergestein, Leder, Textil, Leinwand, Wellpappe, Pappe, Kunststoff, dunkles Acryl (blau ausgeschlossen)


Supported Cutting
Materialien

-

Lindenholz, Paulownia, Kiefer, Sperrholz, Papier, dunkles Acryl (blau ausgeschlossen)

Lindenholz, Paulownia, Kiefer, Sperrholz, Buche, Nussbaum, Bambus, MDF, Leder, Textil, Leinwand, Wellpappe, Pappe, Kunststoff, dunkles Acryl (blau ausgeschlossen)


Work Area (W × D)

-

230 × 250 mm (A250T)
320 × 350 mm (A350T)

400 × 400 mm


CNC-Schnitzen

 

 

 

50 W CNC-Modul

-

Equipped

Optional


200 W CNC-Modul

-

Nicht kompatibel

Equipped


Maximale Spindeldrehzahl

-

12.000 U/min

18.000 U/min


Maximale Arbeitsgeschwindigkeit[1]

-

Buche: 16 mm/s
Acryl: 10 mm/s

Buche: 50 mm/s
Acryl: 33 mm/s


Maximale Abstufung

-

Buche: 1 mm
Acryl: 0,5 mm

Buche: 2 mm
Acryl: 1 mm


Unterstützte Materialien

-

Hartholz (Buche, Nussbaum), Weichholz, Acryl, PCB, Kohlefaser, Jade

Hartholz (Buche, Nussbaum), Weichholz, HDF, MDF, Sperrholz, Jade, Karbonfaser, Acryl, Epoxid-Werkzeugbrett, PCB


Work Area (W × D × H)

-

230 × 250 × 180 mm (A250T)
320 × 350 × 275 mm (A350T)

400 mm × 400 mm × 400 mm


[1] Diese Daten wurden beim Schneiden von Buche mit einem zweischneidigen 3,175-mm-Flachfräser und von Acryl mit einem einschneidigen 3,175-mm-Flachfräser ermittelt. Je nach den verwendeten CNC-Fräsern und Materialien kann die Schnittgeschwindigkeit variieren.

We are here to help

Please feel free to contact us if you have any questions or concerns! info@snapmaker.com

ORDER ISSUES

Delivery time & Express company.

Except Artisan pre-order products:
Delivery time:
Normally, your order will be shipped within 3-5 business days after you make the payment. You will receive your order within 1-2 weeks.
Express company: Orders placed in our official online store will be shipped by FedEx, UPS, DHL, or USPS, which depends on the destination country. Normally, we don't support customers’ assigning specified express companies.

Artisan pre-order products:
Artisan prtinter order will be shipped in December, 2022. (Ocean Freight)
Artisan materials and accessories order will be shipped in October, 2022. If your order includes Snapmaker Artisan, they will be shipped together in December, 2022. (Ocean Freight)

What payment methods do Snapmaker online store support?

Our online store supports the following payment methods: American Express, Apple Pay, MasterCard, PayPal, Klarna, and VISA.

Do I have to pay any extra fee?

It depends on the destination country.
For EU, AU, UK, CA customers: We have warehouses in these countries, so you don't need to pay any extra fee.
For US customers: You don't need to pay customs duty, but due to each state's policy, you may have to pay sales tax.
For customers in other countries: You need to handle the customs clearance and pay the taxes. If you don't have any experience in this, please consult your local customs department.
We will build more warehouses in the future and help our customers save more costs to get our machine.

When will I receive the tracking number?

Normally, your order will be available for delivery within 1-3 business days after you make the payment. Once your order is shipped out, the system will automatically send you the tracking number by email. The tracking number will be delayed during holidays, or when your order is out of stock.

Where will the product be shipped from?

We have overseas warehouses in the United States, Germany, Canada, United Kingdom and Australia. If your delivery address is located in the United States, European Union countries, Canada, United Kingdom or Australia, and your order is in stock, it will be shipped from the corresponding warehouses in these regions. Otherwise, your order will be shipped from the warehouse in Shenzhen, China.

PRODUCT & CASE

Can I change the machine model after placing an order?

We cannot modify your order after it is shipped. If you want to modify the model of the machine before shipping, please contact us at support@snapmaker.com as soon as possible.

What type of materials does the Snapmaker printer support?

3D printing
Snapmaker Original: PLA, ABS.
Snapmaker 2.0: PLA, ABS, PETG, TPU.
Lasergravur
Snapmaker Original: Wood, leather, plastic, fabric, paper, non-transparent acrylic.
Snapmaker 2.0: Wood, leather, plastic, fabric, paper, non-transparent acrylic.
CNC-Schnitzen
Snapmaker Original: Wood, acrylic, PCB, carbon fiber sheet.
Snapmaker 2.0: Wood, acrylic, PCB, carbon fiber sheet, jade.

Can you provide pictures of the case made by the Snapmaker printer?

You can visit our Gemeinschaft for more information.

RETURNS AND WARRANTY

Return and Refund ServiceReturn and Refund Service

  1. It is requested beyond seven (7) calendar days of receiving a Product.
  2. A Product sent to Snapmaker for Return & Refund Service does not include all original accessories and packaging or any item is not in new or like-new condition, i.e. with cracks, dents, or scratches.
  3. Legal proof of purchase, receipt, or invoice is not provided.
  4. Any fault or damage of the Product is caused by unauthorized use or modification of the Product, including exposure to moisture, entry of foreign bodies (water, oil, sand, etc.) or improper installation or operation.
  5. Product labels, serial numbers, etc. show signs of tampering or alteration.
  6. Damage is caused to the Product by uncontrollable external factors, including fire, floods, high winds, or lightning strikes.
  7. A Product is not delivered to the designated warehouse within seven (7) calendar days after Return & Refund Service confirmation is sent from Snapmaker.
  8. Other circumstances stated in this policy.

Repair Service

This warranty does not apply to and therefore not cover

  1. Any other parts except for the Warranted Parts;
  2. Any defect or damage caused by failure to follow instructions in the Quick Start Guides and online Manuals, including but not limited to inappropriate, incorrect or improper use, installation, maintenance, operation, and cleaning;
  3. Any defect or damage caused by an accident, including but not limited to natural calamities such as fire hazard, and human causes such as falling off, collision and soaking in water;
  4. Any defect or damage caused by the use of third party materials, accessories or software, etc.;
  5. Normal wear and tear.

The following actions will void this warranty

  1. Any modification made to any hardware or firmware of the Product;
  2. Abuse, misuse or improper storage of the Product;
  3. Use the Product for any illegal purposes;
  4. Serviced by distributors other than Snapmaker or an authorized Snapmaker distributor;
  5. Use non-supported, unapproved or improper filament or materials with the Product;
  6. Disassemble or repair without authorization by Snapmaker or the Distributor.

Snapmaker’s Limited Warranty

Snapmaker Grants a limited warranty on the major modules of the Snapmaker 3-in-1 3D Printer series product (“Product”) purchased from Snapmaker or a Distributor authorized by Snapmaker according to the terms and conditions stated below.

The warranty starts from the date of delivery to an end-customer for the first time, as evidenced by the original customer’s purchase invoice. Only the original purchaser is entitled to claim a warranty.

Product Warranted Parts
Snapmaker Original Kontroller
Heated Bed
Printing module (Nozzle excluded)
Laser module
CNC module
Linear module
Touchscreen
Netzteil
Snapmaker Original Add-ons Gehäuse für Snapmaker Original
Z-Axis Extension Module for Snapmaker Original
1600mW laser module for Snapmaker Original

Snapmaker 2.0

(A150, A250, A350)

Kontroller
Heated Bed (Printing sheet excluded)
Printing module (Nozzle excluded)
Laser module
CNC module
Linear module
Touchscreen
Leistungsmodul
Konverter
Snapmaker 2.0 Add-ons


Enclosure for Snapmaker 2.0
Snapmaker 2.0 Drehmodul
Not-Aus-Taste
Air Purifier (Filter Cartridge excluded)
CAN Hub

 

Snapmaker 2.0 Bundle (EU customer only)

Snapmaker 2.0
Enclosure for Snapmaker 2.0

Note: Parts that are replaced under the Warranty also fall under their original warranty duration and do not restart.

Warranty periods

Warranty periods for the EU countries and Non-EU countries.

  • 2-year warranty for the customers from the EU countries
  • 1-year warranty for the customers from the Non-EU countries

More About Snapmaker 3D Printer

What is the Fastest 3D Printer?

3D printing can take quite a bit of time; depending on the size and complexity of the project you're printing, you can expect it to take between hours and days to complete. While this might seem like a long time, just take a moment to think about what 3D printers are able to accomplish. There is also good news about these fantastic machines, advances are being made to make them faster and easier to use.

Fast, Accurate, and Easy to Use

If you're looking for the fastest 3D printer, look no further than the Snapmaker Artisan 3-in-1 3D Printer with Enclosure. It's designed to be precise, so everything you make is accurate. Quick Swap technology makes switching fast and easy; it takes less than one minute. This well-made machine is loaded with the features you're looking for, and does the job faster than the rest. This high quality machine is made to provide you with precise cuts in a sturdy machine that can handle intricate cuts while remaining stable even during fast cuttings.

3D printing is becoming more common as more people start buying them for both personal and professional use. It makes sense to choose one of the best and fastest 3D printers available. This printer is perfect for creating prototypes, home decor items, toys, and more. Have fun using the fastest 3D printer around. Advances in 3d printing technology have made this the perfect time to buy your own 3D printer.

What is the Highest Precision 3D Printer?

When it comes to 3D printing, precision is vital. The Snapmaker Artisan 3-in-1 3D Printer with Enclosure is the printer for you if having a high precision 3D printer is your goal. This high end 3D printer is loaded with features that will help make your 3D printing experience a great one.

Why is This Machine so Precise?

Industrial-grade transmission technology in this machine ensures the precision you crave. This machine is well made with top-of- the-line materials to ensure not only precision but durability as well. This printer will stand up to the demands of your busy workshop. Industrial 3D printers have a higher precision rate than other printers; this means greater accuracy for you. As everyone knows, accuracy is a must when it comes to 3D printing; without accuracy, your project will not work or look as you intended.

Better Features

No matter what you're creating, this high resolution 3D printer will provide you with an accurate and speedy finished project. The large work area allows for larger projects. Quick swap platforms allow you to switch between functions quickly, it will take just a minute. The all-metal die-cast base plate is larger in size than previous models of our 3D printers. The base plate is super sturdy to ensure it stays steady even during high-speed printing. It is.another aspect of this printer that ensures precision.

If you're looking for high-quality 3D printing the Snapmaker Artisan 3-in-1 3D printer with enclosure is for you. The precision, the speed, and the durability you want are all here in this one machine. The company has heard what you, the consumer, is looking for, and they put it all in this one superior machine; these high resolution 3D printers will meet and exceed your expectations.

Options to Fit Your Needs

The customized configuration lets you easily make your prototypes in a snap. This printer was designed with ease of operation in mind. From the large touch screen to the dual extension 3D printing module that allows for dissolvable materials, your comfort and enjoyment of this machine were at the forefront of the creators' minds. Being about to use dissolvable materials means less processing post-printing.

Whether you are looking for a high quality 3D printer for work or play, when you want the best, fastest, most precise printer, check out the Snapmaker Artisan 3-in-1 3D printer. It's made to exceed your expectations and take the stress out of 3D printing. Precision is just one of the excellent features of this fantastic machine; you'll find many reasons to love it.

 

Which 3D Printer Is Best for Commercial Use?

Choosing a 3D printer for commercial use does not have to be difficult. While it can seem overwhelming due to the various models on the market, you just have to know what to look for when you shop. You must shop according to features; some consumers shop according to cost, which only leads to problems. A less expensive printer is not necessarily inferior just as the most pricey does to signify superiority. Keep reading to learn more about the features to look for when determining which 3D printer commercial use compatible to choose.

Well-built to Last

An industrial metal 3D printer is needed for commercial use. These printers are well-made and do can the work you need the printer to do. Consider the Snapmaker Artisan 3-in-1 3D printer. This printer is all metal with a die-cast base plate. This gives users a durable machine that does superior work on your 3D printed objects.

The Features You Want

Know what features you want in your 3D printer. It's a good idea to make a mental list of what you plan to do with the printer and what features will help you meet your goal. For example, if you want to print miniatures, consider what features make a printer the best 3d printer for miniatures. Below are the best features to look for when you shop.

  • Precision will help whether you are printing miniatures or oversized pieces.
  • Quick swap technology so you are not wasting time switching things out. Quick Swap lets you get things switched out in just a minute.
  • Large base plate to meet all of your 3d printing needs.
  • The faster your printer works, the better; choose something fast. Printer technology keeps improving, today's printers are faster than those made just a year ago.
  • A large touch screen gives you more room to work and create. Anything that makes life easier is a good feature and a large touchscreen does make life easier.
  • Choose a printer that can remain stable even when printing at high speeds.
  • Buy from a company that offers support. If you need help, it's nice to know that someone is there.

Now that you know what to look for, you're ready to begin shopping for your 3D printer for your commercial needs. Follow the above tips to find the perfect printer for your needs. Be sure to check out the Snapmaker Artisan 3-in-1 3D printer with enclosure; it does all of the above and more. The Artisan 3d printer was made to be user-friendly, while still being able to stand up to your busy days. Remember, the right printer can make your days easier.

 

ORDER ISSUES

Delivery time & Express company.

Delivery time: Normally, your order will be shipped within 1-3 business days after you make the payment. You will receive your order within 1-2 weeks.
Express company: Orders placed in our official online store will be shipped by FedEx, UPS, DHL, or USPS, which depends on the destination country. Normally, we don't support customers’ assigning specified express companies.

What payment methods do Snapmaker online store support?

Our online store supports the following payment methods: American Express, Apple Pay, MasterCard, PayPal, Klarna, and VISA.

Do I have to pay any extra fee?

It depends on the destination country.For EU, US, AU, UK, CA customers: We have warehouses in these countries, so you don't need to pay any extra fee. For customers in other countries: You need to do the customs clearance and pay the taxes. If you don't have any experience in this, please consult your local customs department.We will build more warehouses in the future and help our customers save more costs to get our machine.

When will I receive the tracking number?

Normally, your order will be available for delivery within 1-3 business days after you make the payment. Once your order is shipped out, the system will automatically send you the tracking number by email. The tracking number will be delayed during holidays, or when your order is out of stock.

Where will the product be shipped from?

We have overseas warehouses in the United States, Germany, Canada, United Kingdom and Australia. If your delivery address is located in the United States, European Union countries, Canada, United Kingdom or Australia, and your order is in stock, it will be shipped from the corresponding warehouses in these regions. Otherwise, your order will be shipped from the warehouse in Shenzhen, China.

PRODUCT & CASE

Can I change the machine model after placing an order?

We cannot modify your order after it is shipped. If you want to modify the model of the machine before shipping, please contact us at support@snapmaker.com as soon as possible.

What type of materials does the Snapmaker printer support?

3D printing
Snapmaker Original: PLA, ABS.
Snapmaker 2.0: PLA, ABS, PETG, TPU.
Lasergravur
Snapmaker Original: Wood, leather, plastic, fabric, paper, non-transparent acrylic.
Snapmaker 2.0: Wood, leather, plastic, fabric, paper, non-transparent acrylic.
CNC-Schnitzen
Snapmaker Original: Wood, acrylic, PCB, carbon fiber sheet.
Snapmaker 2.0: Wood, acrylic, PCB, carbon fiber sheet, jade.

Can you provide pictures of the case made by the Snapmaker printer?

You can visit our Gemeinschaft for more information.

RETURNS AND WARRANTY

Return and Refund ServiceReturn and Refund Service

  1. It is requested beyond seven (7) calendar days of receiving a Product.
  2. A Product sent to Snapmaker for Return & Refund Service does not include all original accessories and packaging or any item is not in new or like-new condition, i.e. with cracks, dents, or scratches.
  3. Legal proof of purchase, receipt, or invoice is not provided.
  4. Any fault or damage of the Product is caused by unauthorized use or modification of the Product, including exposure to moisture, entry of foreign bodies (water, oil, sand, etc.) or improper installation or operation.
  5. Product labels, serial numbers, etc. show signs of tampering or alteration.
  6. Damage is caused to the Product by uncontrollable external factors, including fire, floods, high winds, or lightning strikes.
  7. A Product is not delivered to the designated warehouse within seven (7) calendar days after Return & Refund Service confirmation is sent from Snapmaker.
  8. Other circumstances stated in this policy.

Repair Service

This warranty does not apply to and therefore not cover

  1. Any other parts except for the Warranted Parts;
  2. Any defect or damage caused by failure to follow instructions in the Quick Start Guides and online Manuals, including but not limited to inappropriate, incorrect or improper use, installation, maintenance, operation, and cleaning;
  3. Any defect or damage caused by an accident, including but not limited to natural calamities such as fire hazard, and human causes such as falling off, collision and soaking in water;
  4. Any defect or damage caused by the use of third party materials, accessories or software, etc.;
  5. Normal wear and tear.

The following actions will void this warranty

  1. Any modification made to any hardware or firmware of the Product;
  2. Abuse, misuse or improper storage of the Product;
  3. Use the Product for any illegal purposes;
  4. Serviced by distributors other than Snapmaker or an authorized Snapmaker distributor;
  5. Use non-supported, unapproved or improper filament or materials with the Product;
  6. Disassemble or repair without authorization by Snapmaker or the Distributor.

Snapmaker’s Limited Warranty

Snapmaker Grants a limited warranty on the major modules of the Snapmaker 3-in-1 3D Printer series product (“Product”) purchased from Snapmaker or a Distributor authorized by Snapmaker according to the terms and conditions stated below.

The warranty starts from the date of delivery to an end-customer for the first time, as evidenced by the original customer’s purchase invoice. Only the original purchaser is entitled to claim a warranty.

Product Warranted Parts
Snapmaker Original Kontroller
Heated Bed
Printing module (Nozzle excluded)
Laser module
CNC module
Linear module
Touchscreen
Netzteil
Snapmaker Original Add-ons Gehäuse für Snapmaker Original
Z-Axis Extension Module for Snapmaker Original
1600mW laser module for Snapmaker Original

Snapmaker 2.0

(A150, A250, A350)

Kontroller
Heated Bed (Printing sheet excluded)
Printing module (Nozzle excluded)
Laser module
CNC module
Linear module
Touchscreen
Leistungsmodul
Konverter
Snapmaker 2.0 Add-ons


Enclosure for Snapmaker 2.0
Snapmaker 2.0 Drehmodul
Not-Aus-Taste
Air Purifier (Filter Cartridge excluded)
CAN Hub

 

Snapmaker 2.0 Bundle (EU customer only)

Snapmaker 2.0
Enclosure for Snapmaker 2.0

Note: Parts that are replaced under the Warranty also fall under their original warranty duration and do not restart.

Warranty periods

Warranty periods for the EU countries and Non-EU countries.

  • 2-year warranty for the customers from the EU countries
  • 1-year warranty for the customers from the Non-EU countries

Reasons for having a 3D laser printer

Reasons for having a 3D laser printer

As a 3D printer hobbyist, have you ever wondered how to make your 3D printing more successful? Well, having our 3D laser printer will play an important role in your buildup process. So having our 3D laser printer will ensure that you always reap the best out of your printing experience. We have come with this 3D laser just for you to ensure that you take your printing experience to another level of success and fulfillment of your dreams, we make your dreams come true. The 3D laser printer is made with the following amazing features;
  • Newly designed power module with intelligent fan speed adjustment.
  • 1600mW laser cutting module with a built-in camera.
  • CNC carving module with ER11 collet.
  • Controller powered by Cortex-M4 processor.
  • Magnetic Heated Bed with a removable print sheet for 3D printing.
  • 5" Smart touchscreen (Android OS, Quad Core A7 CPU @ 1.1GHz).
  • Newly designed linear modules.
  • Newly designed 3D printing module.
  • Aluminum grid table for laser engraving and cutting.
  • MDF board and clamp sets for CNC carving.
  • Free 3-in-1 Software: Snapmaker luban.
  • Materials include 1kg spool of PLA filament, two pcs of the laser material, and one pc of CNC material.
This is why we say Snapmaker is not just loaded with machines, but we have a series of affordable machines, and with our machines, we make things happen just the way you want them. So hurry now and visit our store and make your orders now to enjoy the above fantastic features and upgrade your printing experience.