![[REPLACEMENT] PAIRED HOT ENDS FOR SNAPMAKER J1/J1S (0.2/0.4/0.6/0.8MM)](http://eu.snapmaker.com/cdn/shop/products/J1__1_1000_1000_f7d7fea5-9158-44bf-9263-328db6b9980f.png?v=1755763085&width=460)
FAQs
-
Pre-Order€159,00€269,00 -
From€17,99€21,99 -
€19,99
-
Hot End for Dual Extrusion Module
From€56,99 -
Extruder Hot End Kit for Snapmaker 2.0
From€11,99 -
-
-
-
CNC Platform (MDF Wasteboard) for Snapmaker 2.0
From€11,50€22,99 -
-
-
From€45,99 -
Toolhead Cable for Snapmaker 2.0
From€3,50€6,99 -
-
PEI Steel Plate (Textured, for Snapmaker U1)
Pre-OrderFrom€36,99€44,99
1. How does Snapmaker Bracing Kit improve the performance of Linear Modules?
Snapmaker Bracing Kit strengthens the rigidity of all Linear Modules, enhancing machining quality while minimizing the need for slider tension adjustments, repairs, and maintenance tasks.
2. Can I use Snapmaker Liquid Glue on all types of 3D printer heated beds?
Yes, Snapmaker Liquid Glue is versatile and can be used on various heated bed surfaces, including textured, glass, and flexible types. It enhances adhesion between the model and the heated bed, reducing printing errors and deformation. Additionally, it's compatible with a variety of 3D printing filament types such as PLA, PETG, PET, ABS, HIPS, ASA, and TPU.
3. What is the maximum airflow of Snapmaker Boosted Exhaust Fan?
Snapmaker Boosted Exhaust Fan has a maximum airflow of 95 CFM. (Note: The included Exhaust Fan in the package of Enclosure for Snapmaker Artisan has a maximum airflow of 36CFM, which is sufficient for the use of the 10W Laser Module. If you desire better fume extraction, you can upgrade it.)
4. What is the compatibility of Snapmaker Dual-sided PEI Steel Plate with Soft Magnetic Sticker Kit?
The Dual-sided PEI Steel Plate with Soft Magnetic Sticker Kit is currently compatible only with Snapmaker Artisan 3-in-1 3D printer.
5. What wavelengths of laser does Snapmaker safety goggles protect against?
Snapmaker goggles provide protection for lasers in the wavelength range of 190–540 nm (OD6+) and 800–1700 nm (OD4+), covering ultraviolet, violet, blue, green, and infrared lasers.
6. When should I replace the FFC cable of the print head on J1/J1s IDEX 3D printer?
Snapmaker FFC cable is for the connection between the extruder and PCB. You should replace the FFC cable in the following situations:
1. If the print head FFC cable shows visible damage, such as severe folding marks or tears.
2. When experiencing abnormal extruder temperature control issues that are confirmed to be caused by the FFC cable.
7. Where can I purchase Snapmaker products through official channels?
Snapmaker products are available through our official online stores and authorized partners. Using these channels helps ensure product authenticity and provides access to applicable warranty coverage and official after-sales support.
Official Europe Store:
https://eu.snapmaker.com/
Official stores for other markets are also available at:
• United States Store: https://us.snapmaker.com/
• Germany Store: https://eu.snapmaker.com/de
• Global Store: https://shop.snapmaker.com/
View the list of official online stores and authorized Snapmaker resellers available in your region on our Where to Buy page.
Before ordering, use the full website addresses listed above or consult the Snapmaker Global Reseller Network to verify the purchasing channel.
FAQs
1. How does Snapmaker Bracing Kit improve the performance of Linear Modules?
Snapmaker Bracing Kit strengthens the rigidity of all Linear Modules, enhancing machining quality while minimizing the need for slider tension adjustments, repairs, and maintenance tasks.
2. Can I use Snapmaker Liquid Glue on all types of 3D printer heated beds?
Yes, Snapmaker Liquid Glue is versatile and can be used on various heated bed surfaces, including textured, glass, and flexible types. It enhances adhesion between the model and the heated bed, reducing printing errors and deformation. Additionally, it's compatible with a variety of 3D printing filament types such as PLA, PETG, PET, ABS, HIPS, ASA, and TPU.
3. What is the maximum airflow of Snapmaker Boosted Exhaust Fan?
Snapmaker Boosted Exhaust Fan has a maximum airflow of 95 CFM. (Note: The included Exhaust Fan in the package of Enclosure for Snapmaker Artisan has a maximum airflow of 36CFM, which is sufficient for the use of the 10W Laser Module. If you desire better fume extraction, you can upgrade it.)
4. What is the compatibility of Snapmaker Dual-sided PEI Steel Plate with Soft Magnetic Sticker Kit?
The Dual-sided PEI Steel Plate with Soft Magnetic Sticker Kit is currently compatible only with Snapmaker Artisan 3-in-1 3D printer.
5. What wavelengths of laser does Snapmaker safety goggles protect against?
Snapmaker goggles provide protection for lasers in the wavelength range of 190–540 nm (OD6+) and 800–1700 nm (OD4+), covering ultraviolet, violet, blue, green, and infrared lasers.
6. When should I replace the FFC cable of the print head on J1/J1s IDEX 3D printer?
Snapmaker FFC cable is for the connection between the extruder and PCB. You should replace the FFC cable in the following situations:
1. If the print head FFC cable shows visible damage, such as severe folding marks or tears.
2. When experiencing abnormal extruder temperature control issues that are confirmed to be caused by the FFC cable.
7. Where can I purchase Snapmaker products through official channels?
Snapmaker products are available through our official online stores and authorized partners. Using these channels helps ensure product authenticity and provides access to applicable warranty coverage and official after-sales support.
Official Europe Store:
https://eu.snapmaker.com/
Official stores for other markets are also available at:
• United States Store: https://us.snapmaker.com/
• Germany Store: https://eu.snapmaker.com/de
• Global Store: https://shop.snapmaker.com/
View the list of official online stores and authorized Snapmaker resellers available in your region on our Where to Buy page.
Before ordering, use the full website addresses listed above or consult the Snapmaker Global Reseller Network to verify the purchasing channel.