🚛 Livraison gratuite à partir de 89 € d'achat.

💰Garantie du meilleur prix pendant 30 jours : si le prix baisse dans les 30 jours, vous recevrez la différence sous forme de carte cadeau.

🛠️Garantie de 2 ans: couvre toutes les machines et tous les modules.

Sélectionnez votre pays / région en fonction de votre adresse de livraison
Les prix et la disponibilité des produits peuvent varier selon le pays ou la région.
Restez informés !

Restez informés !

Abonnez-vous pour recevoir des informations sur nos nouveaux produits et nos promotions exclusives.

Il semble que vous vous trouviez dans une autre région. Rendez-vous sur la boutique recommandée pour bénéficier des frais de livraison et des tarifs locaux.
Passez dès maintenant

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

TVA comprise

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Prise en charge et paramètres d'impression :
• Snapmaker U1 : profils optimisés intégrés à Snapmaker Orca.
• Autres imprimantes : prend en charge la plupart des imprimantes 3D FDM ; un réglage manuel peut être nécessaire.

En savoir plus Masquer
Option

Recommandations

Filament PLA Glow (RFID) - 1 kg
Vente en gros de filaments
Filament RFID à la une

À partir de 18,40 € le rouleau(à partir de 2 rouleaux) | 16,10 € le rouleau(à partir de 4 rouleaux) |14,95 € le rouleau(à partir de 6 rouleaux) | 13,11 € le rouleau(à partir de 10 rouleaux)

Vente en gros de filaments
Filament RFID à la une

À partir de 18,40 € le rouleau(à partir de 2 rouleaux) | 16,10 € le rouleau(à partir de 4 rouleaux) |14,95 € le rouleau(à partir de 6 rouleaux) | 13,11 € le rouleau(à partir de 10 rouleaux)

Jaune vif (F8FF80)
Filament PLA Glow (RFID) - 1 kg
€24,99
Jaune vif (F8FF80)
Jaune vif (F8FF80)
Orange vif (FF9D5B)
Rose lumineux (F17B8F)
Arc-en-ciel pastel
Filament PLA Rainbow (RFID) - 1 kg
€24,99
Filament PLA Rainbow (RFID) - 1 kg
Filament PLA Rainbow (RFID) - 1 kg
Jaune translucide (FFF200)
Filament PLA translucide (RFID) - 1 kg
€22,99
Jaune translucide (FFF200)
Jaune translucide (FFF200)
Vert translucide (008729)
Translucent Light Gray(B1ACA6)
Bleu translucide (46BAE0)
Rose translucide (EEBCC8)
Magenta translucide (DC0080)
Rouge foncé translucide (990002)
Violet (493AB2)
Filament PETG HF (RFID) - 1 kg
€22,99
Violet (493AB2)
Violet (493AB2)
Noir (16171B)
Blanc (F4F9FF)
Gris clair (ACB8C5)
Rouge (FF1523)
Orange (FB7E1B)
Cobalt Blue (0049B8)
Gris argenté (7C818E)
Deep Purple (473378)
Cocoa Brown (6B504C)
Yellow(FBE95C)
Vert (38B837)
Vert foncé (223622)
Rose clair (F5BEE9)
Maroon(7E2D40)
Saga Green (A3B2A4)
Bleu glacier (B1E4E3)
Bleu océan (4EC3E0)
Violet iris (685BC7)
Vert pomme (9DF48F)
Vert avocat (436E42)
Aquamarine(53EECA)
Bleu bleuet (4895F9)
Bleu d'encre (1A4E8A)
Rouge vin (823F2E)
Filament PLA-CF (RFID) - 1 kg
€29,99
Rouge vin (823F2E)
Rouge vin (823F2E)
Vert matcha (6F8653)
Gris graphite (54555B)
Violet (725E7C)
Marron châtaigne (9B7C56)
Bleu denim (49799D)
Noir (000000)
Rose (FFC0CB)
Filament PLA SnapSpeed (RFID) - 1 kg
€22,99
Rose (FFC0CB)
Rose (FFC0CB)
Crème (FFF5E0)
Blanc froid (D9DFE5)
Magenta (F24574)
Bleu ciel (5EBDDB)
Jaune vif (F8F81C)
Vert olive (AFC33C)
Bleu-gris (94B7C9)
Beige chaud (C19E86)
Cocoa Brown (674B47)
Bleu (003776)
Vert (2D9E59)
Gris (8C9099)
Violet (6C5BB1)
Marron (6F4C2F)
Orange (F97429)
Noir (080A0D)
Jaune (F4C032)
Blanc perle (E2DEDB)
Rouge (E72F1D)
Turquoise Blue(53D6D0)
Bleu azur (0066D9)
Gris anthracite (485259)
Rouge de Bourgogne (911821)
Peach Beige(EEDDD2)
Marron caramel (CB8748)
Vert militaire (31532E)
Vert menthe (AFD6C1)
Violet clair (D3D0EB)
Violet prune (660066)
Blanc ivoire (FFFFFF)
Filament PLA mat (RFID) - 1 kg
€22,99
Blanc ivoire (FFFFFF)
Blanc ivoire (FFFFFF)
Noir de carbone (000000)
Orange lave (F78E0E)
Bleu céleste (8BD5EE)
Rose Sakura (F3D6E5)
Gris cendré (485155)
Rouge pastèque (FC6371)
Bleu marine (0078BF)
Marron latte (D3B7A7)
Butter Cream (FEE5A5)
Violet (6600CC)
Violet lavande (AE96D4)
Brun moka (775C50)
Vert citron (D4E458)
Vert olive (68724D)
Bleu acier (2E4462)
Sky Blue(56B7E6)
Rouge terre cuite (D84B2E)
Pervenche (ADB4E6)
Jaune Sunburst (F0BE02)
Vert pin (519F61)
Rouge moteur (DE1619)
Moss Mist (BEC9A5)
Sunset Ember (D9A63A+CC434F)
Filament PLA bicolore Silk (RFID) - 1 kg
€24,99
Sunset Ember (D9A63A+CC434F)
Sunset Ember (D9A63A+CC434F)
Aurora Gold (D9A63A+9675CD)
Alliage solaire (D9A63A+C4C7D9)
Limonade à la menthe (ECED17+44ADE5)
Verre de mer (44ADE5+18CCAF)
Ice Lake (C4C7D9+44ADE5)
Panneau d'affichage urbain (CBF914+D623AA)
Date d'expédition prévue : mi-juin
Blanc perle (DFE4E4)
Filament PLA Silk (RFID) - 1 kg
€22,99
Blanc perle (DFE4E4)
Blanc perle (DFE4E4)
Or (F6CE1B)
Argent (BCC2C8)
Cuivre (AF6B4C)
Rouge grenat (C1443F)
Rose nacré (EFC2CA)
Bleu saphir (768EC7)
Vert néon (A8FF54)
Bleu aqua (4CC1CB)
Emerald Green(55B687)
Noir d'encre (363538)
Orange vif (EB6232)
Vert olive (7F865B)
Champagne (F3CFB2)
Noir (000000)
Filament TPU 95A HF (RFID) - 1 kg
€41,99
Noir (000000)
Noir (000000)
Blanc (FFFFFF)
Gris argenté (9E9E9E)
Marron (865B41)
Bleu vif (0683EF)
Rouge (EE2A20)
Gris foncé (595E69)
Jaune (FFC72C)
Vert (33A15A)
Chêne (C0A086)
Filament PLA bois (RFID) - 1 kg
€24,99
Chêne (C0A086)
Chêne (C0A086)
Érable (F2C6A2)
Noyer (775C50)
Bois de rose (AE7575)

Modes de paiement

  • American Express
  • Apple Pay
  • Cartes bancaires
  • Diners Club
  • Découvrez
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • PayPal
  • UnionPay
  • Visa
  • icône de paiement
  • icône de paiement
  • icône de paiement
  • icône de paiement
  • icône de paiement

Livraison

• UE (hors Chypre et Malte) : expédition depuis l'entrepôt en Allemagne · expédition sous 1 à 2 jours ouvrés · livraison sous 2 à 7 jours ouvrés après expédition • Chypre et Malte : expédition depuis l'entrepôt en Allemagne · expédition sous 1 à 2 jours ouvrés · livraison sous 15 à 30 jours ouvrés après expédition
Livraison
%3Cp%3EGagnez %20[points_amount]%20lorsque%20vous%20achetez%20cet%20article.%20-%202X%20pendant%20les%20soldes%20BFCM%E2%9C%A8%3C/p%3E
PEBA 90A High Rebound Filament (RFID) - 800g

Snapmaker PEBA 90A

Text saying

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Button labeled 'Before You Buy' on a gray background.

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Game On, Bounce On

Soft segments provide elasticity, while hard segments offer support, giving Snapmaker PEBA 90A a flexible feel with a lively bounce.
Ready to give it a try? Start with the mini airless basketball, a quick first print.

Same Drop, Higher Rise[2]

In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

Print Profile 0.4mm layer, 2 walls, 15% infill

Print Profile 0.4mm layer, 2 walls, 15% infill

Lightweight Feel, Longer Comfort

With a density of 1.01–1.05 g/cm³, PEBA 90A combines flexibility and support with less weight. It’s well suited to wearable parts such as sports guards and wrist supports, where a lighter feel can make extended wear more comfortable.

Fatigue Resistant, Rep After Rep

PEBA 90A withstands repeated compression and bending, helping flexible parts maintain their shape and rebound. A dependable choice for parts designed for repeated use.

Reliable Performance, Even in the Cold

Even as temperatures drop, PEBA 90A remains flexible and elastic, with less tendency to stiffen or become brittle. A suitable option for winter sports gear and outdoor functional parts.

Diverse Colors, Versatile Creations

Snapmaker PEBA 90A comes in 5 vibrant colors, bringing together functional performance and personal expression to open up more creative possibilities.

Bobines et emballages recyclés

La bobine et la boîte d'emballage sont toutes deux fabriquées à partir de matériaux recyclés, ce qui permet de réduire l'utilisation de matières premières vierges.

Conseils d'impression

Séchage et conservation

• Dry Before Printing: PEBA 90A High Rebound Filament is sensitive to moisture. Thoroughly dry the filament before printing to reduce surface bubbles, stringing, and other issues. Recommended drying setting: 75°C for 8 hours.
• Store Properly: After opening, store the filament in a sealed container with desiccant. Keep the humidity below 20% during printing and storage, and avoid direct sunlight. Dry the filament again before reuse.

Impression

• Use Manual Loading: As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Do not use an automatic filament feeder. Load the filament manually to improve the print success rate.
• Choose a Suitable Nozzle Size:
Do not use a hot end with a nozzle smaller than 0.4 mm. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm.
• Disable Dynamic Flow Calibration: Before printing, turn off "Dynamic Flow Calibration" to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament using the recommended settings before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, make sure the cooling fan is set to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage the bottom surface of the print. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: For better overhang surface quality and easier support removal, use PETG/PLA as the support material.

Caractéristiques techniques

Conditions d'impression recommandées

* Valeur basée sur une buse de 0,4 mm. Les conditions d'impression peuvent varier en fonction du diamètre de la buse.    

Température de la buse

220–250°C

Température du lit

90–100 °C

Ventilateur de refroidissement

ON

Vitesse d'impression

Up to 107 mm/s

Paramètres de séchage avant l'impression

75°C for 8 h

Propriétés physiques    

Densité

1.01–1.05 g/cm³

Indice de fluidité

8–16 g/10 min

Température de fusion

125–165°C

Température de ramollissement Vicat

≥105°C

Dureté du rivage

90A

Rebound Resilience

65–70%

Propriétés mécaniques

Résistance à la traction (X-Y)

≥16.0 MPa

Résistance à la traction (Z)

7.0 MPa

Taux d'allongement à la rupture (X-Y)

≥500%

Taux d'allongement à la rupture (Z)

140%

Module de flexion (X-Y)

80 MPa

Conditions d'impression recommandées

*Avec une buse de 0,4 mm. Les conditions d'impression peuvent varier en fonction du diamètre de la buse.

Température de la buse

220–250°C

Température du lit

90–100 °C

Ventilateur de refroidissement

ON

Vitesse d'impression

Up to 107 mm/s

Paramètres de séchage avant l'impression

75°C for 6 h

Propriétés physiques

Densité

1.01–1.05 g/cm³

Indice de fluidité

8–16 g/10 min

Température de fusion

125–165°C

Température de ramollissement Vicat

≥105°C

Dureté du rivage

90A

Rebound Resilience

65–70%

Propriétés mécaniques

Résistance à la traction (X-Y)

≥16.0 MPa

Résistance à la traction (Z)

7.0 MPa

Taux d'allongement à la rupture (X-Y)

≥500%

Taux d'allongement à la rupture (Z)

140%

Module de flexion (X-Y)

80 MPa

Ressources sur les produits

Icône représentant un document PDF surmonté de lignes de texte.
Icône représentant un document PDF surmonté de lignes de texte.
Icône représentant un document PDF surmonté de lignes de texte.
Icône représentant un document PDF surmonté de lignes de texte.
Icône représentant un document PDF surmonté de lignes de texte.
Icône représentant un document PDF surmonté de lignes de texte.

Contenu de la boîte

Filament en bobine scellée × 1

Déshydratant× 1

Boîte d'emballage en papier× 1

Filament en bobine scellée × 1

Déshydratant × 1

Boîte d'emballage en papier × 1

3D printing filament spool in orange packaging.

Note:
[1] Under ASTM D2632 test conditions, PEBA 90A achieves a rebound rate of up to 70%. Actual performance may vary depending on model geometry, print settings, and test conditions.
[2] In the demonstration, PEBA 90A and TPU 90A samples use the same basketball model, print settings, drop height, and impact surface. Results reflect the conditions shown only and may differ for other models or uses.
[3] Calculated at the same volume using density values of 1.01 g/cm³ for PEBA 90A and 1.12 g/cm³ for TPU 90A. Actual printed-part weight may vary depending on material density, model geometry, and print settings.

Foire aux questions

1. Compatibilité

• Snapmaker U1: Optimized filament profiles are available in Snapmaker Orca.
• Other FDM 3D printers: Compatible with most FDM 3D printers. Manual adjustment of printing settings may be required.
 

2. Is a Hardened Steel Hot End required when printing with Snapmaker PEBA 90A?

No, it is not required. However, please do note that nozzle sizes smaller than 0.4 mm are not recommended for Snapmaker PEBA 90A. Due to its high extrusion resistance, smaller nozzles significantly increase the risk of clogging. We recommend using a 0.4 mm nozzle or larger to ensure smoother extrusion, more stable filament flow, and reliable printing performance.

3. Does Snapmaker PEBA 90A require a Top Cover?

No. A Top Cover is not required when printing with Snapmaker PEBA 90A. However, we recommend using one, as it helps maintain a more stable printing environment and can reduce warping during printing.

4. How can I optimize print quality when printing Snapmaker PEBA 90A?

To improve print quality and reduce common printing issues, follow these recommendations:

• Load Filament Manually: Do not use an automatic filament feeder. As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Always load and unload the filament manually.
• Choose a Suitable Nozzle Size: Use a nozzle with a diameter of 0.4 mm or larger. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm. Do not use nozzles smaller than 0.4 mm.
• Disable Dynamic Flow Calibration: Turn off Dynamic Flow Calibration before printing to prevent compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament at 75°C for 8 hours before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, set the cooling fan to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage its bottom surface. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: Use PETG or PLA as the support material for better overhang surface quality and easier support removal.

5. What are the recommended printing settings for Snapmaker PEBA 90A?

Paramètre Recommended Setting

Température de la buse

220–250°C

Température du lit

90–100 °C

Ventilateur de refroidissement

ON

Vitesse d'impression

Up to 107 mm/s

Drying Before Printing

75°C for 8 hours

These settings are based on testing with a 0.4 mm nozzle. Actual printing conditions may vary depending on the nozzle diameter.
Note: Before printing, disable Dynamic Flow Calibration to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.

6. Do I need to dry Snapmaker PEBA 90A before printing?

Yes. PEBA 90A is sensitive to moisture and must be thoroughly dried before printing. Moisture absorption may cause surface bubbles, stringing, and other printing issues.
The recommended drying setting is 75°C for 8 hours.

7. How should I store Snapmaker PEBA 90A filament?

After opening, store the filament in a sealed container with desiccant. Keep the relative humidity below 20% during printing and storage, and avoid direct sunlight.
We also recommend drying the filament again before reuse.

8. Which build plates are compatible with Snapmaker PEBA 90A?

Plaque d'impression Compatibilité

Plaque en PEl texturée

Compatible

Smooth PEl Plate

Compatible (Glue stick required)

Graphic PEl Plate

Non recommandé

Note: PEBA 90A may adhere too strongly to the Smooth PEI Plate, and removing the model directly may damage its bottom surface.
We recommend the following steps:
• Apply an even layer of glue stick to the build plate before printing.
• After printing, spray a small amount of alcohol around the contact area between the model and the build plate.
• Allow the alcohol to seep underneath the model before carefully removing the print.

9. What makes Snapmaker PEBA 90A different from TPU 90A?

Snapmaker PEBA 90A offers high rebound, lightweight properties, and fatigue resistance.
• Higher Rebound: PEBA 90A has a rebound rate of up to 70%, compared with approximately 37% for conventional TPU.
• Lightweight: With a density of 1.01–1.05 g/cm³, PEBA 90A can produce models up to 9.8% lighter than the same models printed with TPU 90A.
• Fatigue Resistant: It withstands repeated compression and bending, helping flexible parts maintain their shape and rebound.
• Low-Temperature Performance: It remains flexible and elastic at temperatures as low as −40°C, with less tendency to stiffen or become brittle.
In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

10. What can I make with Snapmaker PEBA 90A?

PEBA 90A is suitable for applications requiring flexibility, high rebound, lightweight properties, and fatigue resistance, especially in low-temperature environments.
Examples include:
• Sports Equipment: Airless basketballs and other sports equipment requiring high rebound.
• Wearable Parts: Sports guards, wrist supports, and other flexible protective gear.
• Winter Sports Gear: Flexible components designed to maintain elasticity and performance in low-temperature environments.

Snapmaker

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Prise en charge et paramètres d'impression :
• Snapmaker U1 : profils optimisés intégrés à Snapmaker Orca.
• Autres imprimantes : prend en charge la plupart des imprimantes 3D FDM ; un réglage manuel peut être nécessaire.

Option

  • Jet Black(1F2329)
  • Pure White(FFFFFF)
  • Cool Grey(7E888D)
  • Vibrant Orange(FF7b00)
  • Bright Yellow(FFed00)
Voir le produit