Caisson Snapmaker 2.0
It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.
Laser
Protection
Physical
Safeguards
Dust
Isolation
Exhaust
System
Tri-fold
Magnetic Doors
Door
Detection
Caisson Snapmaker 2.0
It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.
Laser
Protection
Physical
Safeguards
Dust
Isolation
Exhaust
System
Tri-fold
Magnetic Doors
Door
Detection
Laser Reduction
The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .
Laser Reduction
The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .
Résistance à la poussière
Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.
Résistance à la poussière
Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.
Réduction du bruit
The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.
Réduction du bruit
The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.
Tri-fold Magnetic Doors
Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.
Tri-fold Magnetic Doors
Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.
Détection des portes
Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.
Détection des portes
Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.
Maintenez la température à un niveau approprié
La chaleur est maintenue lorsque vous imprimez en 3D avec des filaments hautes performances comme l'ABS. Ainsi, les impressions sont moins susceptibles de se déformer en raison des variations de température.
Maintenez la température à un niveau approprié
La chaleur est maintenue lorsque vous imprimez en 3D avec des filaments hautes performances comme l'ABS. Ainsi, les impressions sont moins susceptibles de se déformer en raison des variations de température.
Bandes de LED intégrées
Create as you like, whether it’s day or night.
Bandes de LED intégrées
Create as you like, whether it’s day or night.
Custom Software Support
Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.
Custom Software Support
Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.
All-purpose Beams for Your Imagination
The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.
All-purpose Beams for
Your Imagination
The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.
Spécifications
A350T/F350/A350 Enclosure
A250T/F250/A250 Enclosure
Poids net
19,3 kg
Poids net
14,2 kg
Package Dimensions(W × D × H)
900 × 690 × 180 mm
Package Dimensions(W × D × H)
700 × 600 × 260 mm
Poids du paquet :
22.8 kg
Poids du paquet :
16.5 kg
Matériau du cadre
Alliage d'aluminium
Matériau du cadre
Alliage d'aluminium
Matériau du panneau
Acrylique
Matériau du panneau
Acrylique
Unités fonctionnelles
LED Strips, Exhaust Fan, Hose
Unités fonctionnelles
LED Strips, Exhaust Fan, Hose
Spécifications
A350T/F350/A350 Enclosure
Poids net
19,3 kg
Package Dimensions(W × D × H)
900 × 690 × 180 mm
Poids du paquet :
22.8 kg
Matériau du cadre
Alliage d'aluminium
Matériau du panneau
Acrylique
Unités fonctionnelles
LED Strips, Exhaust Fan, Hose
A250T/F250/A250 Enclosure
Poids net
14,2 kg
Package Dimensions(W × D × H)
700 × 600 × 260 mm
Poids du paquet :
16.5 kg
Matériau du cadre
Alliage d'aluminium
Matériau du panneau
Acrylique
Unités fonctionnelles
LED Strips, Exhaust Fan, Hose
Dans la boîte[5]
Side Folding Door
×1
Side Panel
×1
Top Panel
×1
Tuyau
×1
Back Panel
×1
Front Folding Door
×1
24 Beam A350-1
×2
48CA Beam A350-1
×1
24 Beam A350-2
×3
48CA Beam A350-2
×1
24 Beam A350-3
with Hall Switch ×1
48CA Beam A350-3
×1
24 Beam A350-4
×1
48CA Beam A350-4
×1
24 Beam A350-4 with
Enclosure Converter ×1
LED Strip Cable
×2
Quick Start Guide
×1
Exhaust Fan
×1
Hose Connector
×1
Support d'écran tactile
×1
Cable Clip
×20
Connecting Cable
×1
Foot Fixture
×4
Folding Door Slider
×8
Snap Bushing
×1
Hose Clamp
×1
M3 Hex Nut
×8
M3 × 10 Hex Socket
Head Screw ×8
M4 Wing Nut
×4
M4 × 20 Hex Socket
Head Screw ×16
M4 × 28 Hex Socket
Short Head Screw ×32
M4 × 12 Hex Socket
Round Head Screw ×34
H2.0 Hex Key
×1
H2.5 Hex Key
×1
M4 × 35 Hex Socket
Head Screw ×4
Dans la boîte[5]
Side Folding Door
×1
Side Panel
×1
Top Panel
×1
Tuyau
×1
Back Panel
×1
Front Folding Door
×1
24 Beam A350-1
×2
48CA Beam A350-1
×1
24 Beam A350-2
×3
48CA Beam A350-2
×1
24 Beam A350-3
with Hall Switch ×1
48CA Beam A350-3
×1
24 Beam A350-4
×1
48CA Beam A350-4
×1
24 Beam A350-4 with
Enclosure Converter ×1
LED Strip Cable
×2
Quick Start Guide
×1
Exhaust Fan
×1
Hose Connector
×1
Support d'écran tactile
×1
Cable Clip
×20
Connecting Cable
×1
Foot Fixture
×4
Folding Door Slider
×8
Snap Bushing
×1
Hose Clamp
×1
M3 Hex Nut
×8
M3 × 10 Hex Socket
Head Screw ×8
M4 Wing Nut
×4
M4 × 20 Hex Socket
Head Screw ×16
M4 × 28 Hex Socket
Short Head Screw ×32
M4 × 12 Hex Socket
Round Head Screw ×34
H2.0 Hex Key
×1
H2.5 Hex Key
×1
M4 × 35 Hex Socket
Head Screw ×4
Remarques :
[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.
[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.
[3] The A150 Enclosure's doors are magnetic, but can't be folded.
[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.
[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.
Remarques :
[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.
[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.
[3] The A150 Enclosure's doors are magnetic, but can't be folded.
[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.
[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.
Customer Reviews
Based on 245 reviews
62%
(152)
27%
(65)
8%
(20)
1%
(3)
2%
(5)
R
Case Looks Great nur is Not useable because i lost 4 screws (Head breaks off) while assembling the frames and one a Little later with a loud sound… will need to get better screws Irma replacement. As the Frame get instable I was mit able to finish the encloser.
Hi Rainhard,
Thank you for reaching out to Snapmaker.
We are sorry to hear that you have had an unhappy experience with our product.
Our agent is following up with your case. And the replacement has been shipped.
We have forwarded this issue to our quality department for further investigation.
If you have further questions, please don't hesitate to contact us at support@snapmaker.com.
Have a nice day.
Best Regards
Support Team
T
Enclosure for Snapmaker 2.0
R
Enclosure for Snapmaker 2.0
R
The enclosure is gorgeous and the design is very clever, giving you access to the two most important sides of the machine and allowing you to mount wire clips and accessories to the rails. The enclosure is ideal for CNC and 3D printing.
I hesitate to rate more highly because there is NO safety information pertaining to the optical density of the colored acrylic. The software states OD6+ laser glasses should be used in addition to the enclosure when using their 10W laser. The store page states that the enclosure is “laser filtering” but as far as my research goes, it’s use at your own risk for lower power engraving or the 1.6W laser.
OD rated materials are expensive, and I wouldn’t necessarily expect Snapmaker to use them in this enclosure, but Snapmaker is being safety lackadaisical by implying that it’s safe or approved in any capacity for use with lasers. I’d rather they be honest and say it may offer protection, but isn’t rated. Inevitably one of their customers will damage an eye and it’s going to come down to this.
If you’re okay wearing laser filtering glasses when using the laser, this enclosure is ideal. If you’re expecting the enclosure will make safety glasses unnecessary, look elsewhere or build something completely opaque.
W
Fits perfectly....not going to lie it was a pain to set up. Follow the directions ...don't stop the screws...use a hand held driver not a screw gun
