Embouts CNC (5 fraises)
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)

Embouts CNC (5 fraises)

Prix normal
€14,99
Prix de vente
€14,99
Frais d’envoi calculés au moment de passer la commande.
La quantité doit être de 1 ou plus

Les commandes seront expédiées dans un délai de 3 à 5 jours ouvrables après confirmation du paiement. Si vous passez votre commande avec la Snapmaker 2.0, elle sera expédiée avec celle-ci.

Cinq (5) fraises CNC

Ce lot comprend cinq fraises CNC (diamètre de tige : 3,175 mm) :

  • Fraise à bout plat, double cannelure (diamètre de coupe : 3,175 mm) 
  • Fraise à bout plat, cannelure unique (diamètre de coupe : 3,175 mm)
  • Fraise à bout plat, cannelure unique (diamètre de coupe : 1,5 mm)
  • Fraise à bout hémisphérique
  • Embout en V (embout de sculpture pour bois)

CNC Bits (5 bits)

High precision

Wide compatibility

Wear resistant

High precision

Wide compatibility

Wear resistance

Description

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Fraise à bout plate

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Fraise à bout hémisphérique

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Fraise à bout plate
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Fraise à bout hémisphérique
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Présentations

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Specifications


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "




Flat End Mill (double cut 1.5)

Fraise à bout hémisphérique



Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "




Carving V-bit



Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008"
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

Customer Reviews

Based on 56 reviews
80%
(45)
11%
(6)
5%
(3)
0%
(0)
4%
(2)
D
D.W.
Cnc bits review ha ha

I am a complete newbie and got cnc bits when I bought my snapmaker 2. They arrived well packaged in very good time and were well labeled. I bought the snapmaker with cnc carving mainly in mind, however in the past 60 days, I am still to get past the 3d printing and laser etching with my machine working 24 hours a day. I love it and so far think everything about it is pretty much at an A+ standard. There is a learning curve however snapmaker tries to make it easy for first time users. I look foward to using the bits and am also glad that I have spares so when I get something wrong in settings and end up breaking a bit I can immidetly replace them. I am confident that they will be to the same standard that everything else around snapmaker is. Very Happy.

J
J.G.
There good

They came quick so that’s was good but they brake easy and chip

R
R.S.
CNC Bits (5 Bits)

Good product, works excelance

G
G.P.
fantastic

bits are good

R
R.T.

C'et un bon produit

Back to the top
French