Embouts CNC (5 fraises)
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)

Embouts CNC (5 fraises)

Prix régulier €14,99
/
Frais d'expédition calculés lors du passage à la caisse.

134 en stock

Les commandes seront expédiées dans un délai de 3 à 5 jours ouvrables après confirmation du paiement. Si vous passez votre commande avec la Snapmaker 2.0, elle sera expédiée avec celle-ci.

Cinq (5) fraises CNC

Ce lot comprend cinq fraises CNC (diamètre de tige : 3,175 mm) :

  • Fraise à bout plat, double cannelure (diamètre de coupe : 3,175 mm) 
  • Fraise à bout plat, cannelure unique (diamètre de coupe : 3,175 mm)
  • Fraise à bout plat, cannelure unique (diamètre de coupe : 1,5 mm)
  • Fraise à bout hémisphérique
  • Embout en V (embout de sculpture pour bois)

CNC Bits (5 bits)

High precision

Wide compatibility

Wear resistant

High precision

Wide compatibility

Wear resistance

Description

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Fraise à bout plate

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Fraise à bout hémisphérique

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Fraise à bout plate
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Fraise à bout hémisphérique
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Présentations

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Spécifications


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "


Flat End Mill (double cut 1.5)

Fraise à bout hémisphérique



Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "


Carving V-bit



Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008"
Diamètre de tige
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

Customer Reviews

Based on 62 reviews
82%
(51)
10%
(6)
5%
(3)
0%
(0)
3%
(2)
M
Micha Fritz
Perfect !

Perfect ! Very good product

C
Chantal Gingras
Vert good product

Vert good product

N
Nick Roberts

Great to have a selection of bits in one set!

T
TheNorseman
CNC Bits for Snapmaker 2.0

I have been testing the 5 bits from Snapmaker on my machine and they works perfectly. There is not much else to say about them rater then that they works great.

P
Peter McClay
Panther

These cutters work fine in the Snapmaker. It would be great to be able a buy 5 off of each individual shapes/sizes not just a mixed set.