Embouts CNC (5 fraises) – Snapmaker EU
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)
Embouts CNC (5 fraises)

Embouts CNC (5 fraises)

Prix normal
€14,99
Prix de vente
€14,99
Frais d’envoi calculés au moment de passer la commande.
La quantité doit être de 1 ou plus

Les commandes seront expédiées dans un délai de 3 à 5 jours ouvrables après confirmation du paiement. Si vous passez votre commande avec la Snapmaker 2.0, elle sera expédiée avec celle-ci.

Cinq (5) fraises CNC

Ce lot comprend cinq fraises CNC (diamètre de tige : 3,175 mm) :

  • Fraise à bout plat, double cannelure (diamètre de coupe : 3,175 mm) 
  • Fraise à bout plat, cannelure unique (diamètre de coupe : 3,175 mm)
  • Fraise à bout plat, cannelure unique (diamètre de coupe : 1,5 mm)
  • Fraise à bout hémisphérique
  • Embout en V (embout de sculpture pour bois)

CNC Bits (5 bits)

High precision

Wide compatibility

Wear resistant

High precision

Wide compatibility

Wear resistance

Beschreibung

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Flachschaftfräser

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Kugelschaftfräser

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Flachschaftfräser
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Kugelschaftfräser
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Vorzeigeprojekte

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Spezifikationen


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "




Flat End Mill (double cut 1.5)

Kugelschaftfräser



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "




Carving V-bit



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008"
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

Customer Reviews

Based on 61 reviews
82%
(50)
10%
(6)
5%
(3)
0%
(0)
3%
(2)
C
Chantal Gingras
Vert good product

Vert good product

N
Nick Roberts

Great to have a selection of bits in one set!

T
TheNorseman
CNC Bits for Snapmaker 2.0

I have been testing the 5 bits from Snapmaker on my machine and they works perfectly. There is not much else to say about them rater then that they works great.

P
Peter McClay
Panther

These cutters work fine in the Snapmaker. It would be great to be able a buy 5 off of each individual shapes/sizes not just a mixed set.

s
steve h.
snapmaker original

great quality, fast shipment and reasonably priced.

Back to the top
French
French