Snapmaker 2.0
Straight Groove V-bits (3 Bits)
Wear resistant
Broad application
Wider flute
Wear resistant
Broad application
Wider flute
Description
Straight Groove V-bits
UF20 tungsten steel alloy with high hardness and wear resistance, not only is it suitable for epoxy tooling material, but it is also compatible with a dozen materials including carbon fibersheet, MDF and ebony.
A better choice for 4-axis CNC
The longer shank and wider flute carve cylinders or similarly shaped objects more efficiently.
Haute précision
Adjust settings in Snapmaker Luban software and obtain optimal results with a few small tweaks.
Straight Groove V-bits
UF20 tungsten steel alloy with high hardness and wear resistance, not only is it suitable for epoxy tooling material, but it is also compatible with a dozen materials including carbon fibersheet, MDF and ebony.
A better choice for 4-axis CNC
The longer shank and wider flute carve cylinders or similarly shaped objects more efficiently.
Haute précision
Adjust settings in Snapmaker Luban software and obtain optimal results with a few small tweaks.
Présentations
Hollow Candle Holder
Device: Snapmaker 2.0 A350 and Rotary Module A350
Time: 9 h
Processing Mode: 4-axis CNC carving
Material: Epoxy tooling material
Work Speed: 400 mm/min
Step Down: 5 mm
Time: 9 h
Processing Mode: 4-axis CNC carving
Material: Epoxy tooling material
Work Speed: 400 mm/min
Step Down: 5 mm
Hollow Candle Holder
Device: Snapmaker 2.0 A350 and Rotary Module A350
Time: 9 h
Processing Mode: 4-axis CNC carving
Material: Epoxy tooling material
Work Speed: 400 mm/min
Step Down: 5 mm
Astronaut
Device: Snapmaker 2.0 A350 and Rotary Module A350
Time: 10 h
Processing Mode: 4-axis CNC carving
Material: Epoxy tooling material
Work Speed: 400 mm/min
Step Down: 5 mm
Time: 10 h
Processing Mode: 4-axis CNC carving
Material: Epoxy tooling material
Work Speed: 400 mm/min
Step Down: 5 mm
Astronaut
Device: Snapmaker 2.0 A350 and Rotary Module A350
Time: 10 h
Processing Mode: 4-axis CNC carving
Material: Epoxy tooling material
Work Speed: 400 mm/min
Step Down: 5 mm
Spécifications
| Shank Diameter | Included Angle | Total Length | Flute Length | Tip Diameter |
|
3.175 mm |
20° |
50 mm |
24 mm |
0.3 mm |
Shank Diameter: 3.175 mm
Included Angle: 20°
Total Length: 50 mm
Flute Length: 24 mm
Tip Diameter: 0.3 mm
Notes:
• This bit is compatible with Snapmaker 2.0 devices and can be used in both 4-axis CNC and regular CNC.
• Due to the longer shank, please pay attention to the work speed and step down settings to avoid potential risks of bit breaking and danger.
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
w
I used the Straight Groove V-bit to complete the Rotary Module CNC Carving a few days ago, and everything was almost perfect. My material is wood with a diameter of 50cm. When the Straight Groove V-bit goes deep into the center of the wood, because the radius of the wood exceeds the length of the flute, the wood touches the shaft and generates a lot of friction and noise, causing the 3-jaw Chuck to loosen. The diameter of 3-jaw Chuck Inward-clamping of Rotary Module can reach 60CM. The above problem may be more obvious. Is there a solution?
