PETG-Filament (1 kg)
PETG-Filament (1 kg)
PETG-Filament (1 kg)

PETG-Filament (1 kg)

Normaler Preis €24,99
/

42 auf Lager

Farbe

Bestellungen werden innerhalb von 3 - 5 Werktagen nach Zahlungsbestätigung versandt. Wenn Ihre Bestellung zusammen mit dem Snapmaker 2.0 aufgegeben wird, wird sie mit Ihrem Snapmaker 2.0 ausgeliefert.

Eine (1) Spule PETG-Filament (1 kg)

PETG-Filament hat den Ruf, die Funktionalität von ABS (stärker, temperaturbeständig, haltbarer) und die Zuverlässigkeit von PLA (leicht zu bedrucken) zu kombinieren. Die Haftschicht haftet in der Regel ausgezeichnet und trägt dazu bei, das Verziehen oder Schrumpfen Ihrer Drucke zu verringern.

PETG Filament (1kg)

High Quality & Toughness

Outstanding Performance

High Stability

High Quality & Toughness

Outstanding Performance

High Stability

Beschreibung

• Heat-resisting and durable, with high rigidity and flexibility
• Low warping, easy to print with
• Chemical-resistant, tolerant to a variety of chemicals and detergents
• High dimensional accuracy of 1.75 mm (±0.03 mm) diameter
• Wide applicability, compatible with most 3D printers

Showcase

Fractal Pyramid

Knurling Bolt and Nut

Spezifikationen

Weight: 1 kg
Diameter: 1.75 mm
Length: 315m / 344.49 "'
Spool Size: 200 × 65 mm / 7.87 × 2.56 "
Printing Temperature: 230 °C - 250 °C
Heated Bed Temperature: 60 °C - 80 °C
Density: 1.26 (g/cm²)
Printing Speed: user-defined
MFR: (g/10 min): 18 (230 ºC/2.16 kg) / (230 ºC/4.76 lbs.)
Tensile strength: 52 / MPa
Elongation at break: 2.5%
Bending Strength: 70 / MPa
Flexural Modulus: 2050 / MPa
HDT: 65 ℃

Customer Reviews

Based on 26 reviews
85%
(22)
4%
(1)
12%
(3)
0%
(0)
0%
(0)
P
Paul Linn
PETG

Very impressed with this filament. Would highly recommend it. Have found to date this is one of the easiest ones to print of any of them that I’ve tried.

J
Jack Erhart
PETG filament review

Haven't used a lot of it since the color red is not a part of my main projects, but I appreciate having it, and will eventually find a use for it.

A
AngryAsianEyes
PETG Filament

Works great! No adhesion problems.

J
Joseph Distasio
PETG is the most universal filament

ABS is smelly and is sensitive to temperature (lifting) and PLA degrades and both don't have the best track record for UV resistance, but PETG has less of these negatives but performs great under the same type of operation settings.

PETG has a much lower chance of lifting, even on a cold bed, lacks the oily plastic smells, can be used for a final "product" and is extremely user friendly. So far Snapmaker PETG is a very high quality material to "make" with. I have used two other brands and they work, but have a tendency to discolor (burn), and seem "crispy" in texture in comparison.
Snapmaker PETG and even PLA are excellent, high quality materials for about any 3d printing purpose.

H
Herman Zwiers

PETG Filament (1kg)