🚛 Envío gratuito para pedidos superiores a 89 €.

💰Garantía de igualación de precios de 30 días: si el precio baja en un plazo de 30 días, te devolvemos la diferencia en forma de tarjeta regalo.

🛠️Garantía de 2 años: cubre todas las máquinas y módulos.

Selecciona tu país o región según tu dirección de envío
Los precios y la disponibilidad de los productos pueden variar en función del país o la región.
¡Mantente al día!

¡Mantente al día!

Suscríbete para recibir información sobre nuestros nuevos productos y promociones exclusivas.

Parece que te encuentras en otra región. Cambia a la tienda recomendada para ver los precios y las opciones de envío locales.
Cambia ahora

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

IVA incluido

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Compatibilidad y configuración de impresoras:
• Snapmaker U1: perfiles optimizados integrados en Snapmaker Orca.
• Otras impresoras: compatible con la mayoría de las impresoras 3D FDM; puede ser necesario realizar ajustes manuales.

Más información Ocultar
Opción

Recomendaciones

Filamento PLA Glow (RFID) - 1 kg
Venta al por mayor de filamentos
Filamento RFID destacado

Desde tan solo 18,40 € por rollo(a partir de 2 rollos) | 16,10 € por rollo(a partir de 4 rollos) |14,95 € por rollo(a partir de 6 rollos) | 13,11 € por rollo(a partir de 10 rollos)

Venta al por mayor de filamentos
Filamento RFID destacado

Desde tan solo 18,40 € por rollo(a partir de 2 rollos) | 16,10 € por rollo(a partir de 4 rollos) |14,95 € por rollo(a partir de 6 rollos) | 13,11 € por rollo(a partir de 10 rollos)

Amarillo brillante (F8FF80)
Filamento PLA Glow (RFID) - 1 kg
€24,99
Amarillo brillante (F8FF80)
Amarillo brillante (F8FF80)
Naranja brillante (FF9D5B)
Rosa brillante (F17B8F)
Arcoíris en tonos pastel
Filamento PLA Rainbow (RFID) - 1 kg
€24,99
Filamento PLA Rainbow (RFID) - 1 kg
Filamento PLA Rainbow (RFID) - 1 kg
Amarillo translúcido (FFF200)
Filamento translúcido de PLA (RFID) - 1 kg
€22,99
Amarillo translúcido (FFF200)
Amarillo translúcido (FFF200)
Verde translúcido (008729)
Translucent Light Gray(B1ACA6)
Azul translúcido (46BAE0)
Rosa translúcido (EEBCC8)
Magenta translúcido (DC0080)
Rojo oscuro translúcido (990002)
Violeta (493AB2)
Filamento PETG HF (RFID) - 1 kg
€22,99
Violeta (493AB2)
Violeta (493AB2)
Negro (16171B)
Blanco (F4F9FF)
Gris claro (ACB8C5)
Rojo (FF1523)
Naranja (FB7E1B)
Cobalt Blue (0049B8)
Gris plateado (7C818E)
Deep Purple (473378)
Cocoa Brown (6B504C)
Yellow(FBE95C)
Verde (38B837)
Verde oscuro (223622)
Rosa claro (F5BEE9)
Maroon(7E2D40)
Saga Green (A3B2A4)
Azul hielo (B1E4E3)
Azul océano (4EC3E0)
Morado iris (685BC7)
Verde manzana (9DF48F)
Verde aguacate (436E42)
Aquamarine(53EECA)
Azul aciano (4895F9)
Azul tinta (1A4E8A)
Rojo vino (823F2E)
Filamento PLA-CF (RFID) - 1 kg
€29,99
Rojo vino (823F2E)
Rojo vino (823F2E)
Verde Matcha (6F8653)
Gris grafito (54555B)
Morado violeta (725E7C)
Marrón castaño (9B7C56)
Azul vaquero (49799D)
Negro (000000)
Rosa (FFC0CB)
Filamento PLA SnapSpeed (RFID) - 1 kg
€22,99
Rosa (FFC0CB)
Rosa (FFC0CB)
Color crema (FFF5E0)
Blanco frío (D9DFE5)
Magenta (F24574)
Azul cielo (5EBDDB)
Amarillo brillante (F8F81C)
Verde oliva (AFC33C)
Azul grisáceo (94B7C9)
Beige cálido (C19E86)
Cocoa Brown (674B47)
Azul (003776)
Verde (2D9E59)
Gris (8C9099)
Morado (6C5BB1)
Marrón (6F4C2F)
Naranja (F97429)
Negro (080A0D)
Amarillo (F4C032)
Blanco perla (E2DEDB)
Rojo (E72F1D)
Turquoise Blue(53D6D0)
Azul celeste (0066D9)
Gris carbón (485259)
Rojo borgoña (911821)
Peach Beige(EEDDD2)
Marrón caramelo (CB8748)
Verde militar (31532E)
Verde menta (AFD6C1)
Morado claro (D3D0EB)
Morado ciruela (660066)
Blanco marfil (FFFFFF)
Filamento PLA mate (RFID) - 1 kg
€22,99
Blanco marfil (FFFFFF)
Blanco marfil (FFFFFF)
Negro de humo (000000)
Naranja lava (F78E0E)
Azul celestial (8BD5EE)
Rosa Sakura (F3D6E5)
Gris ceniza (485155)
Rojo sandía (FC6371)
Azul marino (0078BF)
Marrón café con leche (D3B7A7)
Butter Cream (FEE5A5)
Morado violeta (6600CC)
Morado lavanda (AE96D4)
Marrón moca (775C50)
Verde lima (D4E458)
Verde oliva (68724D)
Azul acero (2E4462)
Sky Blue(56B7E6)
Rojo terracota (D84B2E)
Violeta (ADB4E6)
Amarillo resplandeciente (F0BE02)
Verde pino (519F61)
Rojo motor (DE1619)
Niebla de musgo (BEC9A5)
Brasa al atardecer (D9A63A+CC434F)
Filamento PLA bicolor Silk (RFID) - 1 kg
€24,99
Brasa al atardecer (D9A63A+CC434F)
Brasa al atardecer (D9A63A+CC434F)
Aurora Gold (D9A63A+9675CD)
Aleación solar (D9A63A+C4C7D9)
Limonada de menta (ECED17+44ADE5)
Cristal marino (44ADE5+18CCAF)
Ice Lake (C4C7D9+44ADE5)
Valla publicitaria urbana (CBF914+D623AA)
Fecha prevista de envío: mediados de junio
Blanco perla (DFE4E4)
Filamento PLA Silk (RFID) - 1 kg
€22,99
Blanco perla (DFE4E4)
Blanco perla (DFE4E4)
Dorado (F6CE1B)
Plata (BCC2C8)
Cobre (AF6B4C)
Rojo granate (C1443F)
Rosa perla (EFC2CA)
Azul zafiro (768EC7)
Verde neón (A8FF54)
Azul aguamarina (4CC1CB)
Emerald Green(55B687)
Negro tinta (363538)
Naranja brillante (EB6232)
Verde oliva (7F865B)
Champán (F3CFB2)
Negro (000000)
Filamento de TPU 95A HF (RFID) - 1 kg
€41,99
Negro (000000)
Negro (000000)
Blanco (FFFFFF)
Gris plateado (9E9E9E)
Marrón (865B41)
Azul brillante (0683EF)
Rojo (EE2A20)
Gris oscuro (595E69)
Amarillo (FFC72C)
Verde (33A15A)
Roble (C0A086)
Filamento PLA de madera (RFID) - 1 kg
€24,99
Roble (C0A086)
Roble (C0A086)
Arce (F2C6A2)
Nogal (775C50)
Palisandro (AE7575)

Formas de pago

  • American Express
  • Apple Pay
  • Tarjetas bancarias
  • Diners Club
  • Descubre
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visado
  • icono de pago
  • icono de pago
  • icono de pago
  • icono de pago
  • icono de pago

Entrega

• UE (excepto CY y MT): Envío desde el almacén de Alemania · Envío en 1-2 días laborables · Entrega en 2-7 días laborables tras el envío • CY y MT: Envío desde el almacén de Alemania · Envío en 1-2 días laborables · Entrega en 15-30 días laborables tras el envío
Entrega
%3Cp%3EGana%20[points_amount]%20al%20comprar%20este%20artículo.%20-%20El doble%20en%20las%20rebajas%20del%20BFCM%E2%9C%A8%3C/p%3E
PEBA 90A High Rebound Filament (RFID) - 800g

Snapmaker PEBA 90A

Text saying

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Button labeled 'Before You Buy' on a gray background.

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Game On, Bounce On

Soft segments provide elasticity, while hard segments offer support, giving Snapmaker PEBA 90A a flexible feel with a lively bounce.
Ready to give it a try? Start with the mini airless basketball, a quick first print.

Same Drop, Higher Rise[2]

In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

Print Profile 0.4mm layer, 2 walls, 15% infill

Print Profile 0.4mm layer, 2 walls, 15% infill

Lightweight Feel, Longer Comfort

With a density of 1.01–1.05 g/cm³, PEBA 90A combines flexibility and support with less weight. It’s well suited to wearable parts such as sports guards and wrist supports, where a lighter feel can make extended wear more comfortable.

Fatigue Resistant, Rep After Rep

PEBA 90A withstands repeated compression and bending, helping flexible parts maintain their shape and rebound. A dependable choice for parts designed for repeated use.

Reliable Performance, Even in the Cold

Even as temperatures drop, PEBA 90A remains flexible and elastic, with less tendency to stiffen or become brittle. A suitable option for winter sports gear and outdoor functional parts.

Diverse Colors, Versatile Creations

Snapmaker PEBA 90A comes in 5 vibrant colors, bringing together functional performance and personal expression to open up more creative possibilities.

Bobinas y embalajes reciclados

Tanto la bobina como la caja de embalaje están fabricadas con materiales reciclados, lo que reduce el uso de materiales vírgenes.

Consejos de impresión

Secado y almacenamiento

• Dry Before Printing: PEBA 90A High Rebound Filament is sensitive to moisture. Thoroughly dry the filament before printing to reduce surface bubbles, stringing, and other issues. Recommended drying setting: 75°C for 8 hours.
• Store Properly: After opening, store the filament in a sealed container with desiccant. Keep the humidity below 20% during printing and storage, and avoid direct sunlight. Dry the filament again before reuse.

Impresión

• Use Manual Loading: As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Do not use an automatic filament feeder. Load the filament manually to improve the print success rate.
• Choose a Suitable Nozzle Size:
Do not use a hot end with a nozzle smaller than 0.4 mm. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm.
• Disable Dynamic Flow Calibration: Before printing, turn off "Dynamic Flow Calibration" to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament using the recommended settings before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, make sure the cooling fan is set to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage the bottom surface of the print. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: For better overhang surface quality and easier support removal, use PETG/PLA as the support material.

Especificaciones

Condiciones de impresión recomendadas

* Basado en una boquilla de 0,4 mm. Las condiciones de impresión pueden variar en función del diámetro de la boquilla.    

Temperatura de la boquilla

220–250°C

Temperatura de la cama

90–100 °C

Ventilador de refrigeración

EN

Velocidad de impresión

Up to 107 mm/s

Ajustes de secado antes de imprimir

75°C for 8 h

Propiedades físicas    

Densidad

1.01–1.05 g/cm³

Índice de fluidez

8–16 g/10 min

Temperatura de fusión

125–165°C

Temperatura de reblandecimiento Vicat

≥105°C

Dureza de la costa

90A

Rebound Resilience

65–70%

Propiedades mecánicas

Resistencia a la tracción (X-Y)

≥16.0 MPa

Resistencia a la tracción (Z)

7.0 MPa

Velocidad de elongación de rotura (X-Y)

≥500%

Velocidad de alargamiento a la rotura (Z)

140%

Módulo de flexión (X-Y)

80 MPa

Condiciones de impresión recomendadas

*Basado en una boquilla de 0,4 mm. Las condiciones de impresión pueden variar en función del diámetro de la boquilla.

Temperatura de la boquilla

220–250°C

Temperatura de la cama

90–100 °C

Ventilador de refrigeración

EN

Velocidad de impresión

Up to 107 mm/s

Ajustes de secado antes de imprimir

75°C for 6 h

Propiedades físicas

Densidad

1.01–1.05 g/cm³

Índice de fluidez

8–16 g/10 min

Temperatura de fusión

125–165°C

Temperatura de reblandecimiento Vicat

≥105°C

Dureza de la costa

90A

Rebound Resilience

65–70%

Propiedades mecánicas

Resistencia a la tracción (X-Y)

≥16.0 MPa

Resistencia a la tracción (Z)

7.0 MPa

Velocidad de elongación de rotura (X-Y)

≥500%

Velocidad de alargamiento a la rotura (Z)

140%

Módulo de flexión (X-Y)

80 MPa

Recursos sobre productos

Icono que representa un documento PDF con líneas de texto encima.
Icono que representa un documento PDF con líneas de texto encima.
Icono que representa un documento PDF con líneas de texto encima.
Icono que representa un documento PDF con líneas de texto encima.
Icono que representa un documento PDF con líneas de texto encima.
Icono que representa un documento PDF con líneas de texto encima.

Contenido de la caja

Filamento en bobina sellada × 1

Desecante× 1

Caja de embalaje de papel× 1

Filamento en bobina sellada × 1

Desecante × 1

Caja de embalaje de papel × 1

3D printing filament spool in orange packaging.

Note:
[1] Under ASTM D2632 test conditions, PEBA 90A achieves a rebound rate of up to 70%. Actual performance may vary depending on model geometry, print settings, and test conditions.
[2] In the demonstration, PEBA 90A and TPU 90A samples use the same basketball model, print settings, drop height, and impact surface. Results reflect the conditions shown only and may differ for other models or uses.
[3] Calculated at the same volume using density values of 1.01 g/cm³ for PEBA 90A and 1.12 g/cm³ for TPU 90A. Actual printed-part weight may vary depending on material density, model geometry, and print settings.

Preguntas frecuentes

1. Compatibilidad

• Snapmaker U1: Optimized filament profiles are available in Snapmaker Orca.
• Other FDM 3D printers: Compatible with most FDM 3D printers. Manual adjustment of printing settings may be required.
 

2. Is a Hardened Steel Hot End required when printing with Snapmaker PEBA 90A?

No, it is not required. However, please do note that nozzle sizes smaller than 0.4 mm are not recommended for Snapmaker PEBA 90A. Due to its high extrusion resistance, smaller nozzles significantly increase the risk of clogging. We recommend using a 0.4 mm nozzle or larger to ensure smoother extrusion, more stable filament flow, and reliable printing performance.

3. Does Snapmaker PEBA 90A require a Top Cover?

No. A Top Cover is not required when printing with Snapmaker PEBA 90A. However, we recommend using one, as it helps maintain a more stable printing environment and can reduce warping during printing.

4. How can I optimize print quality when printing Snapmaker PEBA 90A?

To improve print quality and reduce common printing issues, follow these recommendations:

• Load Filament Manually: Do not use an automatic filament feeder. As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Always load and unload the filament manually.
• Choose a Suitable Nozzle Size: Use a nozzle with a diameter of 0.4 mm or larger. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm. Do not use nozzles smaller than 0.4 mm.
• Disable Dynamic Flow Calibration: Turn off Dynamic Flow Calibration before printing to prevent compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament at 75°C for 8 hours before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, set the cooling fan to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage its bottom surface. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: Use PETG or PLA as the support material for better overhang surface quality and easier support removal.

5. What are the recommended printing settings for Snapmaker PEBA 90A?

Parámetro Recommended Setting

Temperatura de la boquilla

220–250°C

Temperatura de la cama

90–100 °C

Ventilador de refrigeración

EN

Velocidad de impresión

Up to 107 mm/s

Drying Before Printing

75°C for 8 hours

These settings are based on testing with a 0.4 mm nozzle. Actual printing conditions may vary depending on the nozzle diameter.
Note: Before printing, disable Dynamic Flow Calibration to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.

6. Do I need to dry Snapmaker PEBA 90A before printing?

Yes. PEBA 90A is sensitive to moisture and must be thoroughly dried before printing. Moisture absorption may cause surface bubbles, stringing, and other printing issues.
The recommended drying setting is 75°C for 8 hours.

7. How should I store Snapmaker PEBA 90A filament?

After opening, store the filament in a sealed container with desiccant. Keep the relative humidity below 20% during printing and storage, and avoid direct sunlight.
We also recommend drying the filament again before reuse.

8. Which build plates are compatible with Snapmaker PEBA 90A?

Placa de impresión Compatibilidad

Placa de PEl texturizada

Compatible

Smooth PEl Plate

Compatible (Glue stick required)

Graphic PEl Plate

No recomendado

Note: PEBA 90A may adhere too strongly to the Smooth PEI Plate, and removing the model directly may damage its bottom surface.
We recommend the following steps:
• Apply an even layer of glue stick to the build plate before printing.
• After printing, spray a small amount of alcohol around the contact area between the model and the build plate.
• Allow the alcohol to seep underneath the model before carefully removing the print.

9. What makes Snapmaker PEBA 90A different from TPU 90A?

Snapmaker PEBA 90A offers high rebound, lightweight properties, and fatigue resistance.
• Higher Rebound: PEBA 90A has a rebound rate of up to 70%, compared with approximately 37% for conventional TPU.
• Lightweight: With a density of 1.01–1.05 g/cm³, PEBA 90A can produce models up to 9.8% lighter than the same models printed with TPU 90A.
• Fatigue Resistant: It withstands repeated compression and bending, helping flexible parts maintain their shape and rebound.
• Low-Temperature Performance: It remains flexible and elastic at temperatures as low as −40°C, with less tendency to stiffen or become brittle.
In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

10. What can I make with Snapmaker PEBA 90A?

PEBA 90A is suitable for applications requiring flexibility, high rebound, lightweight properties, and fatigue resistance, especially in low-temperature environments.
Examples include:
• Sports Equipment: Airless basketballs and other sports equipment requiring high rebound.
• Wearable Parts: Sports guards, wrist supports, and other flexible protective gear.
• Winter Sports Gear: Flexible components designed to maintain elasticity and performance in low-temperature environments.

Snapmaker

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Compatibilidad y configuración de impresoras:
• Snapmaker U1: perfiles optimizados integrados en Snapmaker Orca.
• Otras impresoras: compatible con la mayoría de las impresoras 3D FDM; puede ser necesario realizar ajustes manuales.

Opción

  • Jet Black(1F2329)
  • Pure White(FFFFFF)
  • Cool Grey(7E888D)
  • Vibrant Orange(FF7b00)
  • Bright Yellow(FFed00)
Ver producto