Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0
Recinto para Snapmaker 2.0

Recinto para Snapmaker 2.0

Precio habitual €599,00
/
Los gastos de envío se calculan en la pantalla de pagos.

72 en stock

Tamaño

Los pedidos se envían 3-5 días laborales tras confirmar el pago. Si realiza el pedido con la Snapmaker 2.0, se enviará conjuntamente con la Snapmaker 2.0.

Funciones generales:

  • Filtrado láser
  • Reducción de ruido
  • Reducción de olores/humos
  • A prueba de polvo
  • Crea un entorno seguro y estable
  • Evita las deformaciones y/o encogimiento del ABS al imprimir
  • Mantiene a sus hijos o mascotas a salvo de riesgos potenciales
  • Incluye tiras LED, un extractor y un conducto de extracción

Dimensiones (La. x An. x Al.):

  • A350: 625 mm x 820 mm x 602 mm
  • A250: 531 mm x 624 mm x 507 mm
  • A150: 398 mm x 423 mm x 407 mm

Peso de envío estimado:

  • A350: 22.2 kg
  • A250: 16.5 kg
  • A150: 11.3 kg

El recinto está construido con aleación de aluminio de grado aeronáutico y una lámina acrílica de filtrado de láser. Es súper fácil de montar, ya que las puertas vienen preensambladas. El recinto puede protegerles a usted y a su familia de riesgos potenciales derivados del proceso de grabado/corte por láser. Cuando se abre una puerta, el proceso de grabado/corte por láser se detiene automáticamente; cuando están todas las puertas cerradas, puede reanudar el grabado/corte por láser mediante la pantalla táctil (esta función de detección de la puerta funciona en los casos siguientes: grabado/corte por Wi-Fi o unidad Flash USB). El recinto cuenta con un mecanismo de puerta plegable y ocupa menos espacio, reduciendo el riesgo de rotura de los paneles acrílicos.

Recinto Snapmaker 2.0

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

Laser
Protection

Physical
Safeguards

Dust
Isolation

Exhaust
System

Tri-fold
Magnetic Doors

Door
Detection

Recinto Snapmaker 2.0

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

Laser
Protection

Physical
Safeguards

Dust
Isolation

Exhaust
System

Tri-fold
Magnetic Doors

Door
Detection

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .

Aislamiento del polvo

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Aislamiento del polvo

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Reducción de ruido

The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.

Reducción de ruido

The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.

Detección de puerta

Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.

Detección de puerta

Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.

Mantener la temperatura adecuada

La temperatura se mantiene durante la impresión 3D con filamentos de alto rendimiento como ABS, de manera que la impresión no se deforma con los cambios de temperatura.

Mantener la temperatura adecuada

La temperatura se mantiene durante la impresión 3D con filamentos de alto rendimiento como ABS, de manera que la impresión no se deforma con los cambios de temperatura.

Tiras LED integradas

Create as you like, whether it’s day or night.

Tiras LED integradas

Create as you like, whether it’s day or night.

Custom Software Support

Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.

Custom Software Support

Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.

All-purpose Beams for Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

All-purpose Beams for
Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

Especificaciones

A350T/F350/A350 Enclosure

A250T/F250/A250 Enclosure

Peso neto
19,3 kg

Peso neto
14,2 kg

Package Dimensions(W × D × H)
900 × 690 × 180 mm

Package Dimensions(W × D × H)
700 × 600 × 260 mm

Peso del paquete:
22.8 kg

Peso del paquete:
16.5 kg

Material del marco
Aleación de aluminio

Material del marco
Aleación de aluminio

Material del panel
Acrílico

Material del panel
Acrílico

Unidades funcionales
LED Strips, Exhaust Fan, Hose

Unidades funcionales
LED Strips, Exhaust Fan, Hose

Especificaciones

A350T/F350/A350 Enclosure

Peso neto
19,3 kg

Package Dimensions(W × D × H)
900 × 690 × 180 mm

Peso del paquete:
22.8 kg

Material del marco
Aleación de aluminio

Material del panel
Acrílico

Unidades funcionales
LED Strips, Exhaust Fan, Hose


A250T/F250/A250 Enclosure

Peso neto
14,2 kg

Package Dimensions(W × D × H)
700 × 600 × 260 mm

Peso del paquete:
16.5 kg

Material del marco
Aleación de aluminio

Material del panel
Acrílico

Unidades funcionales
LED Strips, Exhaust Fan, Hose

En la caja[5]

Side Folding Door
×1

Side Panel
×1

Top Panel
×1

Manguera
 
×1

Back Panel
×1

Front Folding Door
×1

24 Beam A350-1
×2

48CA Beam A350-1
×1

24 Beam A350-2
×3

48CA Beam A350-2
×1

24 Beam A350-3
with Hall Switch
×1

48CA Beam A350-3
×1

24 Beam A350-4
×1

48CA Beam A350-4
×1

24 Beam A350-4 with
Enclosure Converter
×1

LED Strip Cable
×2

Quick Start Guide
×1

Exhaust Fan
×1

Hose Connector
×1

Sujetador de pantalla táctil
×1

Cable Clip
×20

Connecting Cable  
×1

Foot Fixture
×4

Folding Door Slider
×8

Snap Bushing  
×1

Hose Clamp
×1

M3 Hex Nut
×8

M3 × 10 Hex Socket
Head Screw
×8

M4 Wing Nut
×4

M4 × 20 Hex Socket
Head Screw
×16

M4 × 28 Hex Socket
Short Head Screw
×32

M4 × 12 Hex Socket
Round Head Screw
×34

H2.0 Hex Key
×1

H2.5 Hex Key
×1

M4 × 35 Hex Socket
Head Screw
×4

En la caja[5]

Side Folding Door
×1

Side Panel
×1

Top Panel
×1

Manguera
 
×1

Back Panel
×1

Front Folding Door
×1

24 Beam A350-1
×2

48CA Beam A350-1
×1

24 Beam A350-2
×3

48CA Beam A350-2
×1

24 Beam A350-3
with Hall Switch
×1

48CA Beam A350-3
×1

24 Beam A350-4
×1

48CA Beam A350-4
×1

24 Beam A350-4 with
Enclosure Converter
×1

LED Strip Cable
×2

Quick Start Guide
×1

Exhaust Fan
×1

Hose Connector
×1

Sujetador de pantalla táctil
×1

Cable Clip
×20

Connecting Cable  
×1

Foot Fixture
×4

Folding Door Slider
×8

Snap Bushing  
×1

Hose Clamp
×1

M3 Hex Nut
×8

M3 × 10 Hex Socket
Head Screw
×8

M4 Wing Nut
×4

M4 × 20 Hex Socket
Head Screw
×16

M4 × 28 Hex Socket
Short Head Screw
×32

M4 × 12 Hex Socket
Round Head Screw
×34

H2.0 Hex Key
×1

H2.5 Hex Key
×1

M4 × 35 Hex Socket
Head Screw
×4

Notas:

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.

[3] The A150 Enclosure's doors are magnetic, but can't be folded.

[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.

Notas:

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.

[3] The A150 Enclosure's doors are magnetic, but can't be folded.

[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.

Customer Reviews

Based on 235 reviews
62%
(146)
27%
(64)
7%
(17)
1%
(3)
2%
(5)
W
William Pressgrove
It's OK

I had several screws break while assembling it and now it isn't really secure. The doors are a little clunky, but other tab that it's nice I guess.

M
Michael MacDonald
350 cabinet

The cabinet is great easy to access I’ve been using it everyday

F
Fabio Marchesi
regards

Sometimes delivery times get longer, in any case everything is ok and very efficient.thank you

F
Foxy's Art Box
Good investment, some hiccups

Purchased the enclosure along with the machine. Glad I did. Only have done 3D printing so far, plan on trying out the other functions soon once we pick up a filtration system.

Pros: The enclosure was fairly straight forward to assemble. It's nice to have the machine enclosed so we are assured nothing will interfere with the process. Love the light strips which provide a good way to double check that things are working--better than our older shop lighting. Doors provide easy access.

Cons: The screws that hold the main support rails were brittle--the heads snapped off several even without putting much pressure on them. This was not expected considering the cost. The foot print for this is quite large which meant for us having to place the machine sideways on the table (this is more of an issue with our old workshop layout--it's a heads-up to those who are thinking of buying the A350 to watch out for the size and make sure you have a space for it. We needed the larger bed and made it work.) This arrangement makes it awkward to reach the spool for changing. I doubt we are the only ones who have run into this issue. Alternative ways to place the spool rod would be an advantage--as well as a filament guide close to the machine itself to keep it in place near the uprights.

Overall--love having this piece of equipment. Well worth the money, just surprised by a few things.

B
Bob Minteer
Excellent enclosure

Very sturdy, highly functional and nice to look at too.

The only detractor is that the exhaust fan only pushes 30cfm. I added my own inline blower which pushes 130cfm. Made everything perfect.