Brocas CNC (5 brocas)
Brocas CNC (5 brocas)
Brocas CNC (5 brocas)
Brocas CNC (5 brocas)
Brocas CNC (5 brocas)

Brocas CNC (5 brocas)

Precio habitual €16,99 Precio de oferta €11,99
/
Los gastos de envío se calculan en la pantalla de pagos.

327 en stock

Los pedidos se envían 3-5 días laborales tras confirmar el pago. Si realiza el pedido con la Snapmaker 2.0, se enviará conjuntamente con la Snapmaker 2.0.

Cinco (5) brocas CNC

Este paquete incluye cinco brocas CNC (diámetro del mango: 3,175 mm):

  • Fresa de punta plana, flauta doble (diámetro de corte: 3,175 mm) 
  • Fresa de punta plana 3,175 mm)
  • Fresa de punta plana 1,5 mm)
  • Fresa de punta circular
  • Broca en V (broca de tallado para madera)

CNC Bits (5 bits)

High precision

Wide compatibility

Resistente al desgaste

High precision

Wide compatibility

Wear resistance

Descripción

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Fresa de acabado plano

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Fresa de acabado circular

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Fresa de acabado plano
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Fresa de acabado circular
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Vitrinas

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Especificaciones


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "


Flat End Mill (double cut 1.5)

Fresa de acabado circular



Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "


Carving V-bit



Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
32 mm / 1.260 "
 
Angle
30 °
 
Diámetro de la punta
0.2 mm / 0.008"
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
32 mm / 1.260 "
 
Angle
30 °
 
Diámetro de la punta
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

CNC Bits (5 bits)

High precision

Wide compatibility

Resistente al desgaste

High precision

Wide compatibility

Wear resistance

Descripción

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Fresa de acabado plano

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Fresa de acabado circular

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Fresa de acabado plano
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Fresa de acabado circular
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Vitrinas

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Especificaciones


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "


Flat End Mill (double cut 1.5)

Fresa de acabado circular



Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
38 mm / 1.496 "
 
Longitud de ranura
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "


Carving V-bit



Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
32 mm / 1.260 "
 
Angle
30 °
 
Diámetro de la punta
0.2 mm / 0.008"
Diámetro del tubo
3.175 mm / 0.125 "
 
Longitud total
32 mm / 1.260 "
 
Angle
30 °
 
Diámetro de la punta
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

Customer Reviews

Based on 69 reviews
87%
(60)
6%
(4)
4%
(3)
0%
(0)
3%
(2)
J
Jimmie
CNC Bits

Good quality, fast shipment

S
Shawn Butcher

CNC Bits (5 Bits)

G
Guiseppi Mastroieni

They are good just got to start working out the wright one for the wright job but that comes with expreance

S
Stefan Staudinger

CNC Bits (5 Bits)

K
Kian Azizi
Cnc bits

Great