Connect All Your Addons With a CAN Hub
The CAN Hub is a 4-in-1 docking station designed to extend the 4-pin ports of Snapmaker 2.0 product series to allow the connection of Enclosure, Air Purifier, Emergency Stop Button and other upcoming addons. Peripheral devices attached to CAN Hub can connect neatly via a single cable to the Add-on 3 port on the Controller, allowing effortless charging and data transfer.
Aluminum Alloy
Extremely Durable
Ultra Compact
Space-saving
Sleek Design
Simple and Graceful
Expandability
With one port in and four ports out, the CAN Hub comes in handy when you want to connect multiple addons to the Snapmaker 2.0 product series at the same time. You can also daisy chain CAN Hubs to integrate more addons into your Snapmaker 2.0 system.
Ease of use
The CAN Hub can be easily installed on the Snapmaker 2.0 3-in-1 3D Printers or the Enclosures and is basically plug-and-play. Moreover, its five identical ports can function as either input or output ports as you need.
Enclosure
Snapmaker 2.0
High performance
Snapmaker’s CAN Hub is tailormade for connecting multiple Snapmaker 2.0 addons to Snapmaker 2.0 product series. It not only features high compatibility, but also guarantees stable connection and reliable data transfer.
Security
Electrostatic discharge immunity, low heat generation, and anti-reverse connection protection, the CAN Hub can provide you with the safest user experience.
Specifications
Dimension (W × D × H)
136 mm × 51 mm × 26 mm
Connector Type
4 Pin
Number of Output Ports
4
Cable Length
2 m
Net Weight
0.16 kg
Package Weight
0.70 kg
In the Box
CAN Hub × 1
Quick Start Guide × 1
Sliding Nut × 4
Cable Clip × 6
Cable × 1
Conversion Plate × 2
M4 x 10 Hex Socket Head Screw × 4
M4 x 27 Hex Socket Head Screw × 4
Note
1. This product is compatible with the 4-pin addons of the Snapmaker 2.0 series.
2. This product can be connected to only the Add-on 3 port on the Controller or the 4-pin ports on the Enclosure Converter. Do not connect the CAN Hub to the Heated Bed port on the Controller.
3. When installing this product on the Enclosure, ensure the ports face upward so that the cables does not get in the way when you open the side folding door.
Correctly Installed
Incorrectly Installed
Connect All Your Addons With a CAN Hub
The CAN Hub is a 4-in-1 docking station designed to extend the 4-pin ports of Snapmaker 2.0 product series to allow the connection of Enclosure, Air Purifier, Emergency Stop Button and other upcoming addons. Peripheral devices attached to CAN Hub can connect neatly via a single cable to the Add-on 3 port on the Controller, allowing effortless charging and data transfer.
Aluminum Alloy
Extremely Durable
Ultra Compact
Space-saving
Sleek Design
Simple and Graceful
Expandability
With one port in and four ports out, the CAN Hub comes in handy when you want to connect multiple addons to the Snapmaker 2.0 product series at the same time. You can also daisy chain CAN Hubs to integrate more addons into your Snapmaker 2.0 system.
Ease of use
The CAN Hub can be easily installed on the Snapmaker 2.0 3-in-1 3D Printers or the Enclosures and is basically plug-and-play. Moreover, its five identical ports can function as either input or output ports as you need.
Enclosure
Snapmaker 2.0
High Performance
Snapmaker’s CAN Hub is tailormade for connecting multiple Snapmaker 2.0 addons to Snapmaker 2.0 product series. It not only features high compatibility, but also guarantees stable connection and reliable data transfer.
Security
Electrostatic discharge immunity, low heat generation, and anti-reverse connection protection, the CAN Hub can provide you with the safest user experience.
Specifications
Dimension
(W × D × H)
136 mm × 51 mm × 26 mm
Connector Type
4 Pin
Number of Output Ports
4
Cable Length
2 m
Net Weight
0.16 kg
Package Weight
0.70 kg
In the Box
CAN Hub × 1
Cable × 1
Quick Start Guide × 1
Conversion Plate × 2
Sliding Nut × 4
Cable Clip × 6
M4 x 27 Hex Socket Head Screw × 4
M4 x 10 Hex Socket Head Screw × 4
Note
1. This product is compatible with the 4-pin addons of the Snapmaker 2.0 series.
2. This product can be connected to only the Add-on 3 port on the Controller or the 4-pin ports on the Enclosure Converter. Do not connect the CAN Hub to the Heated Bed port on the Controller.
3. When installing this product on the Enclosure, ensure the ports face upward so that the cables does not get in the way when you open the side folding door.
Correctly Installed
Incorrectly Installed
Customer Reviews
Based on 16 reviews
75%
(12)
13%
(2)
0%
(0)
6%
(1)
6%
(1)
U
Everything is fine. Fast delivery. Could be a bit cheeper!
Thank you.
C
Added Emergency stop and needed the CAN hub for more ports. Connected the short cable from the Emergency Stop to the CAN Hub and used the long cable to connect to the expansion port on the enclosure hub, works great.
R
Snapmaker CAN Hub
J
Direct bij mijn A350AT besteld zoals de Noodknop, De producten zien er fantastisch uit maar zijn dat OOK.
Alles werkt Fantastisch
T
Great addition to Snapmaker A350 👍 missed it completely in initial order. Ordered after realizing that filter and emergency button doesn’t work without it. Delivery supper fast. Unpacking the usual Snapmaker experience (read Apple fanboy - like experience) Install walk in the park as with any other part of my A350. Summary if you want enclosure, filter and emergency button, the hub is a must worth every cent!
