Name: PLA Rainbow Filament (RFID) - 1kg
Brand: Snapmaker
SKU: 34360
Price: 24.99 EUR
Availability: OutOfStock

PLA Rainbow Filament (RFID) - 1kg

Snapmaker PLA Rainbow

Bring Prints to Life in Matte Rainbow Colors

PLA Rainbow transitions smoothly through shades of cyan, purple, pink, yellow, green, and more in a single spool. A soft matte finish complements the flowing pastel gradients, giving your prints a refined look.

Varied Gradients, Distinct Visuals

One full rainbow color cycle uses approximately 200 g of filament. Depending on filament usage, model geometry, and print settings, a print may show part of the gradient or the full rainbow, adding rich color variations to your creations.

Rainbow pencil holder with pens, displaying a partial rainbow gradient design.

A Fresh Look with Every Print

The starting color, filament usage, and settings such as infill density shape the final gradient. Even the same model can feature different color patterns, giving each print a character of its own.

Reconocimiento RFID^[2]

When used with the Snapmaker U1, the printer automatically loads preset filament information for a more convenient printing experience.

Bobinas y embalajes reciclados

Tanto la bobina como la caja de embalaje están fabricadas con materiales reciclados, lo que reduce el uso de materiales vírgenes.

Consejos de impresión

Secado y almacenamiento

• Pre-secado: El filamento tiene una baja sensibilidad a la humedad y, por lo general, no requiere secado. No obstante, se recomienda el pre-secado para obtener unos resultados de impresión óptimos. El ajuste recomendado es de 55 °C durante 6 horas.
• Almacenamiento: Cuando no se utilice, guarda el filamento en un lugar seco y alejado de la luz solar directa para mantener una calidad de impresión constante.

Impresión

• Adjusting the Color Gradient: A full rainbow color cycle uses approximately 200 g of filament. The range of colors and gradient effect in your print depend on how much filament is used. You can change how colors are distributed across your model by choosing a different starting color or adjusting the infill density.

Especificaciones

Condiciones de impresión recomendadas

* Basado en una boquilla de 0,4 mm. Las condiciones de impresión pueden variar en función del diámetro de la boquilla.

Temperatura de la boquilla

190–240 °C

Temperatura de la cama

25–70 °C

Ventilador de refrigeración

Velocidad de impresión

Hasta 300 mm/s

Ajustes de secado antes de imprimir

55 °C durante 6 h

Propiedades físicas

Densidad

1.31 g/cm³ (23℃)

Índice de fluidez

14–20 g/10 min

Temperatura de fusión

162,6 °C

Temperatura de transición vítrea

60,6 °C

Temperatura de reblandecimiento Vicat

62,7 °C

Temperatura de deflexión térmica

57,8 °C

Tasa de absorción de agua saturada

0.36% (23°C, 70%RH)

Propiedades mecánicas

Resistencia a la tracción (X-Y)

23.2 ± 0.5 MPa

Resistencia a la tracción (Z)

12.2 ± 0.7 MPa

Velocidad de elongación de rotura (X-Y)

27.8 ± 2.4%

Velocidad de alargamiento a la rotura (Z)

0,9 ± 0,1 %

Módulo de flexión (X-Y)

2209 ± 75 MPa

Resistencia a la flexión (X-Y)

40.4 ± 1.1 MPa

Resistencia al impacto (X-Y)

6.7 ± 0.5 kJ/m²

Condiciones de impresión recomendadas

*Basado en una boquilla de 0,4 mm. Las condiciones de impresión pueden variar en función del diámetro de la boquilla.

Temperatura de la boquilla

190–240 °C

Temperatura de la cama

25–70 °C

Ventilador de refrigeración

Velocidad de impresión

Hasta 300 mm/s

Ajustes de secado antes de imprimir

55 °C durante 6 h

Propiedades físicas

Densidad

1.31 g/cm³ (23℃)

Índice de fluidez

14–20 g/10 min

Temperatura de fusión

162,6 °C

Temperatura de transición vítrea

60,6 °C

Temperatura de reblandecimiento Vicat

62,7 °C

Temperatura de deflexión térmica

57,8 °C

Tasa de absorción de agua saturada

0.36% (23°C, 70%RH)

Propiedades mecánicas

Resistencia a la tracción (X-Y)

23.2 ± 0.5 MPa

Resistencia a la tracción (Z)

12.2 ± 0.7 MPa

Velocidad de elongación de rotura (X-Y)

27.8 ± 2.4%

Velocidad de alargamiento a la rotura (Z)

0,9 ± 0,1 %

Módulo de flexión (X-Y)

2209 ± 75 MPa

Resistencia a la flexión (X-Y)

40.4 ± 1.1 MPa

Resistencia al impacto (X-Y)

6.7 ± 0.5 kJ/m²

Recursos sobre productos

Icono que representa un documento PDF con líneas de texto encima.

Ficha técnica

Guía del usuario

Tabla de códigos hexadecimales y valores TD

Ficha técnica

Guía del usuario

Tabla de códigos hexadecimales y valores TD

Contenido de la caja

Filamento en bobina sellada × 1

Desecante× 1

Caja de embalaje de papel× 1

Filamento en bobina sellada × 1

Desecante × 1

Caja de embalaje de papel × 1

3D printing filament spool next to its packaging box.

Note:
[1] The color swatch is for reference only; color proportions and placement may vary in the finished print.
[2] RFID function is only available for the Snapmaker U1.

Preguntas frecuentes

1. Compatibilidad

Snapmaker PLA Rainbow is a 1.75 mm PLA filament designed for compatible FDM 3D printers.

• Snapmaker U1: Use Snapmaker PLA Rainbow with Snapmaker Orca by selecting the corresponding filament preset.
• Other FDM 3D printers: Compatible with most FDM 3D printers. Manual adjustment of printing settings may be required.

2. What makes Snapmaker PLA Rainbow different from regular PLA?

Snapmaker PLA Rainbow features multiple colors that transition smoothly along a single spool, including cyan, purple, pink, yellow, and green.
Unlike regular single-color PLA, it creates naturally changing color gradients as you print, giving each model a unique, multicolor appearance. Depending on filament consumption, model geometry, and printing settings, the result may showcase a full rainbow spectrum or only part of the color range.
Even when printing the same model with identical settings, the color distribution may vary depending on the starting color of the filament, creating different gradient patterns.

3. How does the rainbow color gradient work?

One complete rainbow color cycle uses approximately 200 g of filament.
As the filament is consumed during printing, its colors gradually transition through the rainbow sequence. Depending on the starting color, filament usage, model geometry, and printing settings, the finished print may display only part of the color sequence or approximately one complete rainbow cycle.
• Full Rainbow Gradient: The print displays approximately one complete rainbow color cycle.
• Partial Rainbow Gradient: The print displays only a portion of the rainbow color sequence.

4. Can I customize the color distribution of my prints?

You can influence the final color distribution through the starting color of the filament, model geometry, and printing settings.
For example:
• Starting Color: The color at the beginning of the filament feed determines where the rainbow color sequence starts, affecting the order of colors in the finished print.
• Model Geometry: The model's size, shape, and structure affect how the color transitions appear across its visible surfaces.
• Infill Density: Different infill densities affect filament consumption and may influence the overall color pattern. However, additional filament used for internal infill does not necessarily result in more visible color transitions on the model's exterior.
Since the color transitions are built into the filament, individual color transitions and their exact placement cannot be independently controlled through the slicer.
Even when printing the same model, differences in the starting color and printing settings may produce different color patterns.

5. What are the recommended printing settings for Snapmaker PLA Rainbow?

Parámetro	Recommended Setting
Temperatura de la boquilla	190–240 °C
Temperatura de la cama	25–70 °C
Ventilador de refrigeración	On
Velocidad de impresión	Hasta 300 mm/s
Drying Before Printing	55 °C durante 6 horas

These settings are based on testing with a 0.4 mm nozzle. Actual printing conditions may vary depending on the printer, nozzle diameter, model geometry, and other factors. Adjust the settings as needed.

6. Do I need to dry Snapmaker PLA Rainbow before printing?

Snapmaker PLA Rainbow has low moisture sensitivity and generally does not require drying before use.
However, for optimal print quality, we recommend pre-drying the filament at 55°C for 6 hours before printing.

7. Build Plate Recommendation

Placa de impresión	Compatibilidad
Textured PEI Plate	Compatible
Placa de PEI lisa	Compatible
Graphic PEI Plate	Compatible

8. Does Snapmaker PLA Rainbow support RFID recognition?

Yes. Snapmaker PLA Rainbow supports RFID recognition on the Snapmaker U1. When the filament is loaded, the U1 automatically identifies it and loads the dedicated PLA Rainbow preset, making setup easier.
Note: RFID recognition is currently available only on the Snapmaker U1.

9. Are the spools and packaging made from recycled materials?

Yes. Both the filament spool and packaging box are made from recycled materials, helping reduce the use of virgin materials.

¡Mantente al día!

PLA Rainbow Filament (RFID) - 1kg

Filamento RFID destacado

Filamento RFID destacado

PLA Glow Filament (RFID) - 1kg

Filamento PETG-CF (RFID) - 1 kg

Filamento translúcido de PLA (RFID) - 1 kg

Filamento translúcido de PETG (RFID) - 1 kg

Filamento PETG HF (RFID) - 1 kg

Filamento PLA-CF (RFID) - 1 kg

Filamento PLA SnapSpeed (RFID) - 1 kg

Filamento PLA mate (RFID) - 1 kg

Filamento PLA bicolor Silk (RFID) - 1 kg

Filamento PLA Silk (RFID) - 1 kg

Filamento de TPU 95A HF (RFID) - 1 kg

Filamento PLA de madera (RFID) - 1 kg

Snapmaker PLA Rainbow

Bring Prints to Life in Matte Rainbow Colors

Varied Gradients, Distinct Visuals

A Fresh Look with Every Print

Reconocimiento RFID[2]

Bobinas y embalajes reciclados

Consejos de impresión

Especificaciones

Recursos sobre productos

Contenido de la caja

1. Compatibilidad

2. What makes Snapmaker PLA Rainbow different from regular PLA?

3. How does the rainbow color gradient work?

4. Can I customize the color distribution of my prints?

5. What are the recommended printing settings for Snapmaker PLA Rainbow?

6. Do I need to dry Snapmaker PLA Rainbow before printing?

7. Build Plate Recommendation

8. Does Snapmaker PLA Rainbow support RFID recognition?

9. Are the spools and packaging made from recycled materials?

PLA Rainbow Filament (RFID) - 1kg

Reconocimiento RFID^[2]