Features
1
von
12
Wird geladen...
Um €320,00 reduziert
Um €320,00 reduziert
Um €320,00 reduziert
Um €320,00 reduziert
Um €320,00 reduziert
Um €750,00 reduziert
Snapmaker 20W & 40W Lasermodul mit Luftunterstützung (inkl. MwSt.)
€749,00 EUR
€1.069,00
Grundpreis /
Nicht verfügbar
⚠️Um das 20W/40W Lasermodul auf dem Snapmaker Artisan 3D-Drucker zu verwenden, müssen Sie das Artisan-Gehäuse erwerben. Das Gehäuse kann nicht online erworben werden. Bitte wenden Sie sich an unseren Kundenservice unter info@snapmaker.com, um einen Kauf zu tätigen.
Produktübersicht
• Starke Laserschneidfähigkeiten: 20W/40W Laserleistung
• Intelligente Luftunterstützung: Die ausgestattete Luftunterstützungspumpe kann über Luban gesteuert werden.
• Laserschutzschild: Reduziert die Laserstrahlung.
• Kompatibilität: Snapmaker 2.0 A350T/A350/A250T/A250/F350/F250, Snapmaker 2.0 A150 (nur kompatibel mit 20W), Snapmaker Artisan, Snapmaker Ray
Snapmaker 20W & 40W Lasermodul mit Luftunterstützung (inkl. MwSt.) - Snapmaker 2.0 / 40W Laser Module ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
Payment methods
Delivery
Orders will be shipped in 1-3 business days.
Orders will be shipped in 1-3 business days.
Versand wird beim Checkout berechnet.
Earn [points_amount] when you buy this item.
20W & 40W Laser Power
20mm Pinewood Cutting in one pass (40W)
15mm Basswood Plywood Cutting in one pass (40W)
10mm Basswood Plywood Cutting in one pass (20W)
Smart Air Assist
Prevent charring, improve the quality of your work, and keep laser lens clean. Air Assist can be controlled via Luban, saving you the bother of manually turning it on or off for different layers.
1000+ Ready-to-use Templates in Luban
Provide an extensive library of preset templates, including common patterns, shapes, and icons, for you to come up with a design in minutes.
Easy to Focus
Calibrate the focus by inputting material thickness on screen and run auto-focus or focus Laser with Focus Lever.
Laser Safety Shield
Reduce laser radiation. Together with the use of Enclosure for 2.0, Artisan or Ray, the laser hazards can be reduced from Class 4 to Class 1.
Transform Even More Ideas Into Reality
Specification
40W Laser Module
20W Laser Module
Laser Output Power
40W
20W
Laser Electric Power
125W
65W
Laser Type
450 - 460nm Semi-conductor
450 - 460nm Semi-conductor
Dimensions
105mm × 166mm × 75mm
92mm × 141mm × 65mm
Weight
1.26kg
0.81kg
Maximum Work Speed[1]
Snapmaker 2.0: 100mm/s
Snapmaker Artisan: 200mm/s
Snapmaker 2.0: 100mm/s
Snapmaker Artisan: 200mm/s
Maximum Cutting Speed[2]
20mm/s
10mm/s
Work Area
400mm × 400mm (Artisan)
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
400mm × 400mm (Artisan)
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
Frame Material
Aluminum Alloy
Aluminum Alloy
Supported Engraving Materials
Basswood, Pinewood, Plywood, Beech,Walnut, Bamboo, MDF, Painted Metal,Tinplate, Stainless Steel, Anodized Aluminum, Dark Glass, Slate, Brick, Ceramic, Jade, Marble, Shale, Leather, Fabric, Canvas,Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Basswood, Pinewood, Plywood, Beech,Walnut, Bamboo, MDF, Painted Metal,Tinplate, Stainless Steel, Anodized Aluminum, Dark Glass, Slate, Brick, Ceramic, Jade, Marble, Shale, Leather, Fabric, Canvas,Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Supported Cutting Materials
Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric,Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded), Stainless Steel (0.1mm)
Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric,Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Maximum Thickness of one-pass cutting
15mm Basswood Plywood
10mm Basswood Plywood
Laser Spot Dimensions
0.1mm × 0.15mm
0.08mm × 0.1mm
Supported Design File
STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR
STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR
Supported Processing File
NC
NC
Air Assist
√
√
Camera Capture
×
×
Focus Method
2.0/Artisan: Auto-focus through manual measuring or Material Touching Measuring (using Focus Lever)
2.0/Artisan: Auto-focus through manual measuring or Material Touching Measuring (using Focus Lever)
Overheat Protection
√
√
Orientation Detection
√
√
Compatibility
Artisan (3-in-1 version), Ray, A350T/A350, A250T/A250, F350/F250, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button, Enclosure for 2.0
Artisan (3-in-1 version), Ray, A350T/A350, A250T/A250, F350/F250, A150, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button, Enclosure for 2.0
Notes:
[1] Depending on your material, the work speed might vary.
[2] The data is obtained based on the 3mm Basswood Plywood performing one pass cutting. Depending on your material, the cutting speed might vary.
Comparison
Weight
1.26kg
Maximum Engraving Speed
Snapmaker 2.0: 100 mm/s Snapmaker Artisan: 200 mm/s
Maximum Cutting Speed
20 mm/s
Maximum Thickness of one-pass cutting
15 mm Basswood Plywood
400 mm × 400 mm (Artisan)
Work Area
320 mm × 350 mm (A350/A350T/F350)
230 mm × 250 mm (A250/A250T/F250)
Laser Spot Dimensions
0.1mm × 0.15mm
Air Assist
√
Camera Capture
×
Weight
0.81kg
Maximum Engraving Speed
Snapmaker 2.0: 100 mm/s Snapmaker Artisan: 200 mm/s
Maximum Cutting Speed
10 mm/s
Maximum Thickness of one-pass cutting
10 mm Basswood Plywood
400 mm × 400 mm (Artisan)
Work Area
320 mm × 350 mm (A350/A350T/F350)
230 mm × 250 mm (A250/A250T/F250)
Laser Spot Dimensions
0.08mm × 0.1mm
Air Assist
√
Camera Capture
×
Weight
0.63kg
Maximum Engraving Speed
Snapmaker 2.0: 100 mm/s Snapmaker Artisan: 200 mm/s
Maximum Cutting Speed
5 mm/s
Maximum Thickness of one-pass cutting
5 mm Basswood Plywood
400 mm × 400 mm (Artisan)
Work Area
320 mm × 350 mm (A350/A350T/F350)
230 mm × 250 mm (A250/A250T/F250)
Laser Spot Dimensions
0.05mm × 0.2mm
Air Assist
×
Camera Capture
√
In the Box (40W Laser Module)
40W Laser Module × 1
Air Assist Pump × 1
Air Tube × 1
Boosted Toolhead Cable (for Snapmaker 2.0 user only) × 1
Air Assist Pump Conversion Cable (for Snapmaker 2.0 user only) × 1
Cotton Swab × 5
Cable Tie × 1
M4 × 12 Screw × 3
M4 × 8 Screw × 6
Basswood Plywood × 1
Calibration Card × 1
Online Tutorial Guide Card × 1
Laser Lens Protector × 1
In the Box (20W Laser Module)
20W Laser Module × 1
Air Assist Pump × 1
Air Tube × 1
Air Assist Pump Conversion Cable (for Snapmaker 2.0 user only) × 1
Cotton Swab × 5
Cable Tie × 1
M4 × 12 Screw × 3
M4 × 8 Screw × 6
Basswood Plywood × 1
Calibration Card × 1
Online Tutorial Guide Card × 1
Laser Lens Protector × 1
Frequently Asked Questions
1. What is the maximum cutting thickness of 20W & 40W Laser Module?
20W laser module: 10mm Basswood Plywood in one pass.
40W laser module: 15mm Basswood Plywood in one pass.
2. Does the 20W & 40W Laser Module have a camera function like the 10W Laser Module?
No, the 20W & 40W Laser Modules do not include a built-in camera function like the 10W Laser Module. Instead, they utilize a Focus Lever for laser platform height calibration, which offers a simple and reliable workflow. Rest assured, you'll achieve incredible results and a smooth experience with these new laser modules.
3. If I have both the Snapmaker 2.0 machine and the Snapmaker Artisan machine, which one should I choose?
The 1064nm We recommend choosing the Snapmaker 2.0 machine with the 20W & 40W Laser Module. When you purchase the Snapmaker 2.0 machine, you will be provided with a Boosted Toolhead Cable and an Air Assist Pump Conversion Cable. These cables are essential for the proper functioning of the 20W and 40W Laser Module, as there may be compatibility issues without them.
However, Snapmaker Artisan & Ray machines don't need these extra cables. If you have mistakenly selected the wrong machine type when placing your order, you can contact support at info@snapmaker.com to make the needed changes.
4. What are the specs of 10W & 20W & 40W Laser Module?
[1] Depending on your material, the work speed might vary.
[2] The data is obtained based on the 3mm Basswood Plywood performing one pass cutting. Depending on your material, the cutting speed might vary.
Features
20W & 40W Laser Power
20mm Pinewood Cutting in one pass (40W)
15mm Basswood Plywood Cutting in one pass (40W)
10mm Basswood Plywood Cutting in one pass (20W)
Smart Air Assist
Prevent charring, improve the quality of your work, and keep laser lens clean. Air Assist can be controlled via Luban, saving you the bother of manually turning it on or off for different layers.
1000+ Ready-to-use Templates in Luban
Provide an extensive library of preset templates, including common patterns, shapes, and icons, for you to come up with a design in minutes.
Easy to Focus
Calibrate the focus by inputting material thickness on screen and run auto-focus or focus Laser with Focus Lever.
Laser Safety Shield
Reduce laser radiation. Together with the use of Enclosure for 2.0, Artisan or Ray, the laser hazards can be reduced from Class 4 to Class 1.
Transform Even More Ideas Into Reality
Specification
40W Laser Module
Laser Output Power
40W
Laser Electric Power
125W
Laser Type
450 - 460nm Semi-conductor
Dimensions
105mm × 166mm × 75mm
Weight
1.26kg
Maximum Work Speed[1]
Snapmaker 2.0: 100mm/s
Snapmaker Artisan: 200mm/s
Maximum Cutting Speed[2]
20mm/s
400mm × 400mm (Artisan)
Work Area
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
Frame Material
Aluminum Alloy
Supported Engraving Materials
Basswood, Pinewood, Plywood, Beech,Walnut, Bamboo, MDF, Painted Metal,Tinplate, Stainless Steel, Anodized Aluminum, Dark Glass, Slate, Brick, Ceramic, Jade, Marble, Shale, Leather, Fabric, Canvas,Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Supported Cutting Materials
Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric,Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded), Stainless Steel (0.1mm)
Maximum Thickness of one-pass cutting
15mm Basswood Plywood
Laser Spot Dimensions
0.1mm × 0.15mm
Supported Design File
STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR
Supported Processing File
NC
Air Assist
√
Camera Capture
×
Focus Method
2.0/Artisan: Auto-focus through manual measuring or Material Touching Measuring (using Focus Lever)
Overheat Protection
√
Orientation Detection
√
Compatibility
Artisan (3-in-1 version), Ray, A350T/A350, A250T/A250, F350/F250, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button, Enclosure for 2.0
20W Laser Module
Laser Output Power
20W
Laser Electric Power
65W
Laser Type
450 - 460nm Semi-conductor
Dimensions
92mm × 141mm × 65mm
Weight
0.81kg
Maximum Work Speed[1]
Snapmaker 2.0: 100mm/s
Snapmaker Artisan: 200mm/s
Maximum Cutting Speed[2]
10mm/s
400mm × 400mm (Artisan)
Work Area
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
Frame Material
Aluminum Alloy
Supported Engraving Materials
Basswood, Pinewood, Plywood, Beech,Walnut, Bamboo, MDF, Painted Metal,Tinplate, Stainless Steel, Anodized Aluminum, Dark Glass, Slate, Brick, Ceramic, Jade, Marble, Shale, Leather, Fabric, Canvas,Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Supported Cutting Materials
Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric,Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Maximum Thickness of one-pass cutting
10mm Basswood Plywood
Laser Spot Dimensions
0.08mm × 0.1mm
Supported Design File
STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR
Supported Processing File
NC
Air Assist
√
Camera Capture
×
Focus Method
2.0/Artisan: Auto-focus through manual measuring or Material Touching Measuring (using Focus Lever)
Overheat Protection
√
Orientation Detection
√
Compatibility
Artisan (3-in-1 version), Ray, A350T/A350, A250T/A250, F350/F250, A150, Air Purifier, Rotary Module, CAN Hub, Emergency Stop Button, Enclosure for 2.0
Notes:
[1] Depending on your material, the work speed might vary.
[2] The data is obtained based on the 3mm Basswood Plywood performing one pass cutting. Depending on your material, the cutting speed might vary.
Comparison
Weight
1.26kg
Maximum Engraving Speed
Snapmaker 2.0: 100mm/s Snapmaker Artisan: 200mm/s
Maximum Cutting Speed
20 mm/s
Maximum Thickness of one-pass cutting
15mm Basswood Plywood
400mm × 400mm (Artisan)
Work Area
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
Laser Spot Dimensions
0.1mm × 0.15mm
Air Assist
√
Camera Capture
×
Weight
0.81kg
Maximum Engraving Speed
Snapmaker 2.0: 100mm/s Snapmaker Artisan: 200mm/s
Maximum Cutting Speed
10mm/s
Maximum Thickness of one-pass cutting
10mm Basswood Plywood
400mm × 400mm (Artisan)
Work Area
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
Laser Spot Dimensions
0.08mm × 0.1mm
Air Assist
√
Camera Capture
×
Weight
0.63kg
Maximum Engraving Speed
Snapmaker 2.0: 100mm/s
Snapmaker Artisan: 200mm/s
Maximum Cutting Speed
5mm/s
Maximum Thickness of one-pass cutting
5mm Basswood Plywood
400mm × 400mm (Artisan)
Work Area
320mm × 350mm (A350/A350T/F350)
230mm × 250mm (A250/A250T/F250)
Laser Spot Dimensions
0.05mm × 0.2mm
Air Assist
×
Camera Capture
√
In the Box (40W Laser Module)
40W Laser
Module × 1
Air Assist Pump × 1
Air Tube × 1
Boosted Toolhead Cable (for Snapmaker 2.0 user only) × 1
Air Assist Pump Conversion Cable (for Snapmaker 2.0 user only) × 1
Cotton Swab × 5
Cable Tie × 1
M4 × 12 Screw × 3
M4 × 8 Screw × 6
Basswood Plywood
× 1
Calibration Card × 1
Online Tutorial Guide Card × 1
Laser Lens Protector × 1
Base Plate × 1
AC Power Cable × 1
USB Cable × 1
In the Box (20W Laser Module)
20W Laser
Module × 1
Air Assist Pump × 1
Air Tube × 1
Air Assist Pump Conversion Cable (for Snapmaker 2.0 user only) × 1
Cotton Swab × 5
Cable Tie × 1
M4 × 12 Screw
× 3
M4 × 8 Screw
× 6
Basswood Plywood
× 1
Calibration Card × 1
Online Tutorial Guide Card × 1
Laser Lens Protector × 1
Base Plate × 1
AC Power Cable × 1
USB Cable × 1
Frequently Asked Questions
1. What is the maximum cutting thickness of 20W & 40W Laser Module?
20W laser module: 10mm Basswood Plywood in one pass.
40W laser module: 15mm Basswood Plywood in one pass.
2. Does the 20W & 40W Laser Module have a camera function like the 10W Laser Module?
No, the 20W & 40W Laser Modules do not include a built-in camera function like the 10W Laser Module. Instead, they utilize a Focus Lever for laser platform height calibration, which offers a simple and reliable workflow. Rest assured, you'll achieve incredible results and a smooth experience with these new laser modules.
3. If I have both the Snapmaker 2.0 machine and the Snapmaker Artisan machine, which one should I choose?
We recommend choosing the Snapmaker 2.0 machine with the 20W & 40W Laser Module. When you purchase the Snapmaker 2.0 machine, you will be provided with a Boosted Toolhead Cable and an Air Assist Pump Conversion Cable. These cables are essential for the proper functioning of the 20W and 40W Laser Module, as there may be compatibility issues without them.
However, Snapmaker Artisan & Ray machines don't need these extra cables. If you have mistakenly selected the wrong machine type when placing your order, you can contact support at info@snapmaker.com to make the needed changes.
4. What are the specs of 10W & 20W & 40W Laser Module?
Notes:
[1] Depending on your material, the work speed might vary.
[2] The data is obtained based on the 3mm Basswood Plywood performing one pass cutting. Depending on your material, the cutting speed might vary.
