Produktübersicht
- Allzweckfräser mit 4 mm-Schaft
- Beste Wahl für das CNC-Fräsen von Metallwerkstoffen
- YK25UF gehärtete Wolframstahllegierung, mit hoher Härte und Verschleißfestigkeit
Kompatibilität
- Snapmaker Artisan
- Snapmaker 2.0 (muss zusammen mit dem Verspannungssatz verwendet werden)
In der Box
- V-Bit (Seitenwinkel 60 Grad; die Spitze des Messers ist farbbeschichtet, Anti-Haft beim Schnitzen von Metall; Flachdurchmesser 0,2mm) x 1
- Flacher Schaftfräser (drei Fluten; Schneiddurchmesser 4mm) x 1
- Kugelkopffräser (Zweischneidig; Schneiddurchmesser 2mm) x 1
- ER11-A Spannzange (4mm) x 1
1
von
6
Wird geladen...
CNC-Bits - 4mm-Schaft (3 Bits, mit Spindelspannzange)
€29,99 EUR
Grundpreis /
Nicht verfügbar
Featured RFID Filament
As low as€14,4/roll (4 rolls) and€13,25/roll (8 rolls)!
Featured RFID Filament
As low as€14,4/roll (4 rolls) and€13,25/roll (8 rolls)!
20% off
SnapSpeed PLA Filament (RFID) - 1KG
€21,59 €26,99
Pink (FFC0CB)
20% off
Matte PLA Filament (RFID) - 1KG
€19,19 €23,99
Ivory White (FFFFFF)
20% off
PLA-Filament (1 kg)
€23,19 €28,99
Schwarz
20% off
ABS-Filament (1kg)
€23,19 €28,99
Schwarz
20% off
Schwarzes High Flow TPU95 Filament (1kg)
€40,79 €50,99
Schwarzes High Flow TPU95 Filament (1kg)
20% off
Schwarzes Nylon-Filament (1kg)
€54,39 €67,99
Schwarzes Nylon-Filament (1kg)
20% off
PVA-Filament (500g)
€31,99 €39,99
PVA-Filament (500g)
20% off
Breakaway Support für PLA (500g)
€18,39 €22,99
Breakaway Support für PLA (500g)
Payment methods
Delivery
Orders will be shipped in 1-3 business days.
Orders will be shipped in 1-3 business days.
Versand wird beim Checkout berechnet.
Specifications
V Bit
Flat End Mill
Shank Diameter
4 mm
Side Angle
60 degree
Flat Diameter
0.2mm
Shank Diameter
4 mm
Three Flute
Cutting Diameter
4mm
Ball End Mill
ER11-A Collet 4mm
Shank Diameter
4 mm
Double Flute
Cutting Diameter
2 mm
Diameter
4mm
* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
Device
Snapmaker 2.0 A350
200W CNC & Bracing Kit
Snapmaker 2.0 A350
200W CNC & Bracing Kit
Snapmaker 2.0 A350
200W CNC & Bracing Kit
Time
4.5h
5h
4.2h
Processing Mode
Roughing: Flat End Mill (4mm) Engraving: V Bit (4mm)
Roughing: Flat End Mill (4mm) Engraving: V Bit (4mm)
Roughing: Flat End Mill (4mm) Engraving: Ball End Mill (4mm)
Material
Brass H62
Aluminum 6061
Aluminum 6061
Work Speed
Roughing:100mm/min
Engraving: 200mm/min
Roughing:100mm/min
Engraving: 200mm/min
Roughing:100mm/min
Engraving: 200mm/min
Step Down
0.1mm
0.1mm
0.1mm
Specifications
V Bit
Flat End Mill
Shank Diameter
4 mm
Side Angle
60 degree
Flat Diameter
0.2mm
Shank Diameter
4 mm
Three Flute
Cutting Diameter
4mm
Shank Diameter
4 mm
Side Angle
60 degree
Flat Diameter
0.2mm
Shank Diameter
4 mm
Three Flute
Cutting Diameter
4mm
Ball End Mill
ER11-A Collet 4mm
Shank Diameter
4 mm
Double Flute
Cutting Diameter
2 mm
Diameter
4mm
Shank Diameter
4 mm
Double Flute
Cutting Diameter
2 mm
Diameter
4mm
* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
Device
Snapmaker 2.0 A350
200W CNC & Bracing Kit
Snapmaker 2.0 A350
200W CNC & Bracing Kit
Time
4.5h
5h
Processing Mode
Roughing: Flat End Mill (4mm) Engraving: V Bit (4mm)
Roughing: Flat End Mill (4mm) Engraving: V Bit (4mm)
Material
Brass H62
Aluminum 6061
Work Speed
Roughing:100mm/min Engraving: 200mm/min
Roughing:100mm/min Engraving: 200mm/min
Step Down
0.1mm
0.1mm
Device
Snapmaker 2.0 A350
200W CNC & Bracing Kit
Time
4.2h
Processing Mode
Roughing: Flat End Mill (4mm) Engraving: Ball End Mill (4mm)
Material
Aluminum 6061
Work Speed
Roughing:100mm/min Engraving: 200mm/min
Step Down
0.1mm
