CNC Bits (5 bits)
High precision
Wide compatibility
Wear resistant
High precision
Wide compatibility
Wear resistance
Description
General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.
Flat End Mill
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Ball End Mill
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.
Flat End Mill
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Ball End Mill
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.
Showcases
Astronaut (CNC Carving)
Wavy surface (CNC Carving)
Specifications
Flat End Mill (double cut)
Flat End Mill (single cut 3.175)
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Flat End Mill (double cut 1.5)
Ball End Mill
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
1.5 mm / 0.059 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
17 mm / 0.669 "
Cutting Diameter
3 mm / 0.117 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
1.5 mm / 0.059 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
17 mm / 0.669 "
Cutting Diameter
3 mm / 0.117 "
Carving V-bit
Shank Diameter
3.175 mm / 0.125 "
Total Length
32 mm / 1.260 "
Angle
30 °
Tip Diameter
0.2 mm / 0.008"
Shank Diameter
3.175 mm / 0.125 "
Total Length
32 mm / 1.260 "
Angle
30 °
Tip Diameter
0.2 mm / 0.008 "
* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
CNC Bits (5 bits)
High precision
Wide compatibility
Wear resistant
High precision
Wide compatibility
Wear resistance
Description
General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.
Flat End Mill
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Ball End Mill
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.
Flat End Mill
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Ball End Mill
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.
Showcases
Astronaut (CNC Carving)
Wavy surface (CNC Carving)
Specifications
Flat End Mill (double cut)
Flat End Mill (single cut 3.175)
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Flat End Mill (double cut 1.5)
Ball End Mill
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
1.5 mm / 0.059 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
17 mm / 0.669 "
Cutting Diameter
3 mm / 0.117 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
12 mm / 0.472 "
Cutting Diameter
1.5 mm / 0.059 "
Shank Diameter
3.175 mm / 0.125 "
Total Length
38 mm / 1.496 "
Flute Length
17 mm / 0.669 "
Cutting Diameter
3 mm / 0.117 "
Carving V-bit
Shank Diameter
3.175 mm / 0.125 "
Total Length
32 mm / 1.260 "
Angle
30 °
Tip Diameter
0.2 mm / 0.008"
Shank Diameter
3.175 mm / 0.125 "
Total Length
32 mm / 1.260 "
Angle
30 °
Tip Diameter
0.2 mm / 0.008 "
* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
