🚛 Gratis verzending bij bestellingen van meer dan € 89.

💰30 dagen prijsgarantie: ontvang het prijsverschil als cadeaubon als de prijs binnen 30 dagen daalt.

🛠️2 jaar garantie: geldt voor alle machines en modules.

Kies uw land/regio op basis van uw verzendadres
De prijzen en beschikbaarheid van producten kunnen per land of regio verschillen.
Blijf op de hoogte!

Blijf op de hoogte!

Schrijf je in om op de hoogte te blijven van onze nieuwe producten en exclusieve aanbiedingen.

Het lijkt erop dat je je in een andere regio bevindt. Ga naar de aanbevolen winkel voor lokale verzending en prijzen.
Nu overstappen

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

incl. btw

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Printerondersteuning en instellingen:
• Snapmaker U1: Geoptimaliseerde profielen ingebouwd in Snapmaker Orca.
• Andere printers: Ondersteunt de meeste FDM-3D-printers; handmatige afstelling kan nodig zijn.

Meer informatie Verbergen
Optie

Aanbevelingen

PLA Glow-filament (RFID) - 1 kg
Groothandel in gloeilampen
Aanbevolen RFID-filament

Vanaf € 18,40 per rol(2 of meer rollen) | € 16,10 per rol(4 of meer rollen) |€ 14,95 per rol(6 of meer rollen) | € 13,11 per rol(10 of meer rollen)

Groothandel in gloeilampen
Aanbevolen RFID-filament

Vanaf € 18,40 per rol(2 of meer rollen) | € 16,10 per rol(4 of meer rollen) |€ 14,95 per rol(6 of meer rollen) | € 13,11 per rol(10 of meer rollen)

Glow Yellow (F8FF80)
PLA Glow-filament (RFID) - 1 kg
€24,99
Glow Yellow (F8FF80)
Glow Yellow (F8FF80)
Glow Orange (FF9D5B)
Glow Pink (F17B8F)
Pastelregenboog
PLA Rainbow-filament (RFID) - 1 kg
€24,99
PLA Rainbow-filament (RFID) - 1 kg
PLA Rainbow-filament (RFID) - 1 kg
Doorschijnend geel (FFF200)
PLA doorschijnend filament (RFID) - 1 kg
€22,99
Doorschijnend geel (FFF200)
Doorschijnend geel (FFF200)
Doorschijnend groen (008729)
Translucent Light Gray(B1ACA6)
Doorschijnend blauw (46BAE0)
Doorschijnend roze (EEBCC8)
Doorschijnend magenta (DC0080)
Doorschijnend donkerrood (990002)
Violet (493AB2)
PETG HF-filament (RFID) - 1 kg
€22,99
Violet (493AB2)
Violet (493AB2)
Zwart (16171B)
Wit (F4F9FF)
Lichtgrijs (ACB8C5)
Rood (FF1523)
Oranje (FB7E1B)
Cobalt Blue (0049B8)
Zilvergrijs (7C818E)
Deep Purple (473378)
Cocoa Brown (6B504C)
Yellow(FBE95C)
Groen (38B837)
Donkergroen (223622)
Lichtroze (F5BEE9)
Maroon(7E2D40)
Saga Green (A3B2A4)
IJsblauw (B1E4E3)
Oceaanblauw (4EC3E0)
Irispaars (685BC7)
Appelgroen (9DF48F)
Avocadogroen (436E42)
Aquamarine(53EECA)
Korenbloemblauw (4895F9)
Inktblauw (1A4E8A)
Wijnrood (823F2E)
PLA-CF-filament (RFID) - 1 kg
€29,99
Wijnrood (823F2E)
Wijnrood (823F2E)
Matcha Green (6F8653)
Grafietgrijs (54555B)
Violetpaars (725E7C)
Kastanjebruin (9B7C56)
Denimblauw (49799D)
Zwart (000000)
Roze (FFC0CB)
SnapSpeed PLA-filament (RFID) - 1 kg
€22,99
Roze (FFC0CB)
Roze (FFC0CB)
Crème (FFF5E0)
Koud wit (D9DFE5)
Magenta (F24574)
Hemelsblauw (5EBDDB)
Felgeel (F8F81C)
Olijfgroen (AFC33C)
Blauwgrijs (94B7C9)
Warm beige (C19E86)
Cocoa Brown (674B47)
Blauw (003776)
Groen (2D9E59)
Grijs (8C9099)
Paars (6C5BB1)
Bruin (6F4C2F)
Oranje (F97429)
Zwart (080A0D)
Geel (F4C032)
Parelwit (E2DEDB)
Rood (E72F1D)
Turquoise Blue(53D6D0)
Azure Blue(0066D9)
Antracietgrijs (485259)
Bordeauxrood (911821)
Peach Beige(EEDDD2)
Caramel Brown(CB8748)
Legergroen (31532E)
Mintgroen (AFD6C1)
Lichtpaars (D3D0EB)
Pruimpaars (660066)
Ivoorwit (FFFFFF)
Mat PLA-filament (RFID) - 1 kg
€22,99
Ivoorwit (FFFFFF)
Ivoorwit (FFFFFF)
Roet (000000)
Lava Orange (F78E0E)
Hemelsblauw (8BD5EE)
Sakura Pink (F3D6E5)
Asgrijs (485155)
Watermeloenrood (FC6371)
Marineblauw (0078BF)
Lattebruin (D3B7A7)
Butter Cream (FEE5A5)
Violetpaars (6600CC)
Lavendelpaars (AE96D4)
Mokka-bruin (775C50)
Limoengroen (D4E458)
Olijfgroen (68724D)
Staalblauw (2E4462)
Sky Blue(56B7E6)
Terracottarood (D84B2E)
Maagdenpalm (ADB4E6)
Sunburst Yellow (F0BE02)
Dennengroen (519F61)
Motorrood (DE1619)
Moss Mist (BEC9A5)
Sunset Ember (D9A63A+CC434F)
Silk tweekleurig PLA-filament (RFID) - 1 kg
€24,99
Sunset Ember (D9A63A+CC434F)
Sunset Ember (D9A63A+CC434F)
Aurora Gold (D9A63A+9675CD)
Solar Alloy (D9A63A+C4C7D9)
Muntlimonade (ECED17+44ADE5)
Zeeglas (44ADE5+18CCAF)
Ice Lake (C4C7D9+44ADE5)
Stadsreclamebord (CBF914+D623AA)
Verwachte verzenddatum: half juni
Parelwit (DFE4E4)
Silk PLA-filament (RFID) - 1 kg
€22,99
Parelwit (DFE4E4)
Parelwit (DFE4E4)
Goud (F6CE1B)
Zilver (BCC2C8)
Koper (AF6B4C)
Granaatrood (C1443F)
Parelroze (EFC2CA)
Saffierblauw (768EC7)
Neongroen (A8FF54)
Aquablauw (4CC1CB)
Emerald Green(55B687)
Inktzwart (363538)
Fel oranje (EB6232)
Olijfgroen (7F865B)
Champagne (F3CFB2)
Zwart (000000)
TPU 95A HF-filament (RFID) - 1 kg
€41,99
Zwart (000000)
Zwart (000000)
Wit (FFFFFF)
Zilvergrijs (9E9E9E)
Bruin (865B41)
Helderblauw (0683EF)
Rood (EE2A20)
Donkergrijs (595E69)
Geel (FFC72C)
Groen (33A15A)
Eik (C0A086)
Hout-PLA-filament (RFID) - 1 kg
€24,99
Eik (C0A086)
Eik (C0A086)
Esdoorn (F2C6A2)
Walnoot (775C50)
Rozenhout (AE7575)

Betaalmethoden

  • American Express
  • Apple Pay
  • Betaalkaarten
  • Diners Club
  • Ontdek
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • PayPal
  • UnionPay
  • Visum
  • betaalpictogram
  • betaalpictogram
  • betaalpictogram
  • betaalpictogram
  • betaalpictogram

Levering

• EU (m.u.v. CY en MT): Verzending vanuit het magazijn in Duitsland · Verzending binnen 1–2 werkdagen · Levering binnen 2–7 werkdagen na verzending • CY en MT: Verzending vanuit het magazijn in Duitsland · Verzending binnen 1–2 werkdagen · Levering binnen 15–30 werkdagen na verzending
Levering
%3Cp%3EVerdien%20[points_amount]%20wanneer%20je%20dit%20artikel%20koopt.%20-%202x%20tijdens%20de%20BFCM-uitverkoop%E2%9C%A8%3C/p%3E
PEBA 90A High Rebound Filament (RFID) - 800g

Snapmaker PEBA 90A

Text saying

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Button labeled 'Before You Buy' on a gray background.

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Game On, Bounce On

Soft segments provide elasticity, while hard segments offer support, giving Snapmaker PEBA 90A a flexible feel with a lively bounce.
Ready to give it a try? Start with the mini airless basketball, a quick first print.

Same Drop, Higher Rise[2]

In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

Print Profile 0.4mm layer, 2 walls, 15% infill

Print Profile 0.4mm layer, 2 walls, 15% infill

Lightweight Feel, Longer Comfort

With a density of 1.01–1.05 g/cm³, PEBA 90A combines flexibility and support with less weight. It’s well suited to wearable parts such as sports guards and wrist supports, where a lighter feel can make extended wear more comfortable.

Fatigue Resistant, Rep After Rep

PEBA 90A withstands repeated compression and bending, helping flexible parts maintain their shape and rebound. A dependable choice for parts designed for repeated use.

Reliable Performance, Even in the Cold

Even as temperatures drop, PEBA 90A remains flexible and elastic, with less tendency to stiffen or become brittle. A suitable option for winter sports gear and outdoor functional parts.

Diverse Colors, Versatile Creations

Snapmaker PEBA 90A comes in 5 vibrant colors, bringing together functional performance and personal expression to open up more creative possibilities.

Gerecyclede spoel en verpakking

Zowel de spoel als de verpakkingsdoos zijn gemaakt van gerecycleerde materialen, waardoor er minder nieuwe grondstoffen worden gebruikt.

Tips voor het afdrukken

Drogen en opslag

• Dry Before Printing: PEBA 90A High Rebound Filament is sensitive to moisture. Thoroughly dry the filament before printing to reduce surface bubbles, stringing, and other issues. Recommended drying setting: 75°C for 8 hours.
• Store Properly: After opening, store the filament in a sealed container with desiccant. Keep the humidity below 20% during printing and storage, and avoid direct sunlight. Dry the filament again before reuse.

Afdrukken

• Use Manual Loading: As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Do not use an automatic filament feeder. Load the filament manually to improve the print success rate.
• Choose a Suitable Nozzle Size:
Do not use a hot end with a nozzle smaller than 0.4 mm. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm.
• Disable Dynamic Flow Calibration: Before printing, turn off "Dynamic Flow Calibration" to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament using the recommended settings before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, make sure the cooling fan is set to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage the bottom surface of the print. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: For better overhang surface quality and easier support removal, use PETG/PLA as the support material.

Technische gegevens

Aanbevolen afdrukinstellingen

* Gebaseerd op een spuitmond van 0,4 mm. De afdrukresultaten kunnen variëren bij verschillende spuitmonddiameters.    

Temperatuur van de spuitmond

220–250°C

Temperatuur van het bed

90–100 °C

Koelventilator

AAN

Afdruksnelheid

Up to 107 mm/s

Drooginstellingen vóór het afdrukken

75°C for 8 h

Fysische eigenschappen    

Dichtheid

1.01–1.05 g/cm³

Smeltindex

8–16 g/10 min

Smelttemperatuur

125–165°C

Vicat-verwekingstemperatuur

≥105°C

Kusthardheid

90A

Rebound Resilience

65–70%

Mechanische eigenschappen

Treksterkte (X-Y)

≥16.0 MPa

Treksterkte (Z)

7.0 MPa

Breukrek (X-Y)

≥500%

Breukrek (Z)

140%

Buigmodulus (X-Y)

80 MPa

Aanbevolen afdrukinstellingen

*Op basis van een spuitmond van 0,4 mm. De afdrukresultaten kunnen variëren bij verschillende spuitmonddiameters.

Temperatuur van de spuitmond

220–250°C

Temperatuur van het bed

90–100 °C

Koelventilator

AAN

Afdruksnelheid

Up to 107 mm/s

Drooginstellingen vóór het afdrukken

75°C for 6 h

Fysische eigenschappen

Dichtheid

1.01–1.05 g/cm³

Smeltindex

8–16 g/10 min

Smelttemperatuur

125–165°C

Vicat-verwekingstemperatuur

≥105°C

Kusthardheid

90A

Rebound Resilience

65–70%

Mechanische eigenschappen

Treksterkte (X-Y)

≥16.0 MPa

Treksterkte (Z)

7.0 MPa

Breukrek (X-Y)

≥500%

Breukrek (Z)

140%

Buigmodulus (X-Y)

80 MPa

Productinformatie

Pictogram dat een PDF-document weergeeft met tekstregels erboven.
Pictogram dat een PDF-document weergeeft met tekstregels erboven.
Pictogram dat een PDF-document weergeeft met tekstregels erboven.
Pictogram dat een PDF-document weergeeft met tekstregels erboven.
Pictogram dat een PDF-document weergeeft met tekstregels erboven.
Pictogram dat een PDF-document weergeeft met tekstregels erboven.

Inhoud van de verpakking

Verzegelde spoel met filament × 1

Droogmiddel× 1

Papieren verpakkingsdoos× 1

Verzegelde spoel met filament × 1

Droogmiddel × 1

Papieren verpakkingsdoos × 1

3D printing filament spool in orange packaging.

Note:
[1] Under ASTM D2632 test conditions, PEBA 90A achieves a rebound rate of up to 70%. Actual performance may vary depending on model geometry, print settings, and test conditions.
[2] In the demonstration, PEBA 90A and TPU 90A samples use the same basketball model, print settings, drop height, and impact surface. Results reflect the conditions shown only and may differ for other models or uses.
[3] Calculated at the same volume using density values of 1.01 g/cm³ for PEBA 90A and 1.12 g/cm³ for TPU 90A. Actual printed-part weight may vary depending on material density, model geometry, and print settings.

Veelgestelde vragen

1. Compatibiliteit

• Snapmaker U1: Optimized filament profiles are available in Snapmaker Orca.
• Other FDM 3D printers: Compatible with most FDM 3D printers. Manual adjustment of printing settings may be required.
 

2. Is a Hardened Steel Hot End required when printing with Snapmaker PEBA 90A?

No, it is not required. However, please do note that nozzle sizes smaller than 0.4 mm are not recommended for Snapmaker PEBA 90A. Due to its high extrusion resistance, smaller nozzles significantly increase the risk of clogging. We recommend using a 0.4 mm nozzle or larger to ensure smoother extrusion, more stable filament flow, and reliable printing performance.

3. Does Snapmaker PEBA 90A require a Top Cover?

No. A Top Cover is not required when printing with Snapmaker PEBA 90A. However, we recommend using one, as it helps maintain a more stable printing environment and can reduce warping during printing.

4. How can I optimize print quality when printing Snapmaker PEBA 90A?

To improve print quality and reduce common printing issues, follow these recommendations:

• Load Filament Manually: Do not use an automatic filament feeder. As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Always load and unload the filament manually.
• Choose a Suitable Nozzle Size: Use a nozzle with a diameter of 0.4 mm or larger. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm. Do not use nozzles smaller than 0.4 mm.
• Disable Dynamic Flow Calibration: Turn off Dynamic Flow Calibration before printing to prevent compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament at 75°C for 8 hours before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, set the cooling fan to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage its bottom surface. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: Use PETG or PLA as the support material for better overhang surface quality and easier support removal.

5. What are the recommended printing settings for Snapmaker PEBA 90A?

Parameter Recommended Setting

Temperatuur van de spuitmond

220–250°C

Temperatuur van het bed

90–100 °C

Koelventilator

AAN

Afdruksnelheid

Up to 107 mm/s

Drying Before Printing

75°C for 8 hours

These settings are based on testing with a 0.4 mm nozzle. Actual printing conditions may vary depending on the nozzle diameter.
Note: Before printing, disable Dynamic Flow Calibration to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.

6. Do I need to dry Snapmaker PEBA 90A before printing?

Yes. PEBA 90A is sensitive to moisture and must be thoroughly dried before printing. Moisture absorption may cause surface bubbles, stringing, and other printing issues.
The recommended drying setting is 75°C for 8 hours.

7. How should I store Snapmaker PEBA 90A filament?

After opening, store the filament in a sealed container with desiccant. Keep the relative humidity below 20% during printing and storage, and avoid direct sunlight.
We also recommend drying the filament again before reuse.

8. Which build plates are compatible with Snapmaker PEBA 90A?

Bouwplaat Compatibiliteit

PEl-plaat met structuur

Compatibel

Smooth PEl Plate

Compatible (Glue stick required)

Graphic PEl Plate

Niet aanbevolen

Note: PEBA 90A may adhere too strongly to the Smooth PEI Plate, and removing the model directly may damage its bottom surface.
We recommend the following steps:
• Apply an even layer of glue stick to the build plate before printing.
• After printing, spray a small amount of alcohol around the contact area between the model and the build plate.
• Allow the alcohol to seep underneath the model before carefully removing the print.

9. What makes Snapmaker PEBA 90A different from TPU 90A?

Snapmaker PEBA 90A offers high rebound, lightweight properties, and fatigue resistance.
• Higher Rebound: PEBA 90A has a rebound rate of up to 70%, compared with approximately 37% for conventional TPU.
• Lightweight: With a density of 1.01–1.05 g/cm³, PEBA 90A can produce models up to 9.8% lighter than the same models printed with TPU 90A.
• Fatigue Resistant: It withstands repeated compression and bending, helping flexible parts maintain their shape and rebound.
• Low-Temperature Performance: It remains flexible and elastic at temperatures as low as −40°C, with less tendency to stiffen or become brittle.
In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

10. What can I make with Snapmaker PEBA 90A?

PEBA 90A is suitable for applications requiring flexibility, high rebound, lightweight properties, and fatigue resistance, especially in low-temperature environments.
Examples include:
• Sports Equipment: Airless basketballs and other sports equipment requiring high rebound.
• Wearable Parts: Sports guards, wrist supports, and other flexible protective gear.
• Winter Sports Gear: Flexible components designed to maintain elasticity and performance in low-temperature environments.

Snapmaker

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Printerondersteuning en instellingen:
• Snapmaker U1: Geoptimaliseerde profielen ingebouwd in Snapmaker Orca.
• Andere printers: Ondersteunt de meeste FDM-3D-printers; handmatige afstelling kan nodig zijn.

Optie

  • Jet Black(1F2329)
  • Pure White(FFFFFF)
  • Cool Grey(7E888D)
  • Vibrant Orange(FF7b00)
  • Bright Yellow(FFed00)
Bekijk het product