Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0

Behuizing voor Snapmaker 2.0

Regular price €599,00
/
Shipping calculated at checkout.

43 in stock

Afmeting

Bestellingen worden binnen 3-5 werkdagen na betalingsbevestiging verzonden. Als uw bestelling bij de Snapmaker 2.0 wordt geplaatst, wordt deze met uw Snapmaker 2.0 verzonden.

Algemene kenmerken:

  • Laserfiltering
  • Ruisonderdrukking
  • Geur-/dampenreductie
  • Stofdicht
  • Creëert een veilige en stabiele omgeving
  • Voorkomt kromtrekken en/of krimpen van ABS tijdens het printen
  • Houdt uw kinderen of huisdieren weg van mogelijke gevaren
  • Ledstrips, een afzuigventilator en een afvoerkanaal zijn inbegrepen

Afmetingen (L x B x H):

  • A350: 625 mm x 820 mm x 602 mm
  • A250: 531 mm x 624 mm x 507 mm
  • A150: 398 mm x 423 mm x 407 mm

Geschat verzendgewicht:

  • A350: 22.2 kg
  • A250: 16.5 kg
  • A150: 11.3 kg

De behuizing is gemaakt van een aluminiumlegering van vliegtuigkwaliteit en laserfilterende acrylplaat. Het is super eenvoudig te monteren omdat de deuren voorgemonteerd worden geleverd. De behuizing kan u en uw gezinsleden beschermen tegen mogelijke gevaren veroorzaakt door het lasergravure/snijproces. Wanneer een van de deuren wordt geopend, stopt de lasergravure/het snijproces automatisch; wanneer alle deuren gesloten zijn, kan u het lasergraveren/snijden hervatten via het aanraakscherm. (Deze functie voor deurdetectie werkt in de volgende scenario's: graveren/snijden via wifi- of USB-flashstation.) De behuizing maakt gebruik van een vouwdeurmechanisme en neemt minder ruimte in beslag, waardoor de kans op het breken van de acrylpanelen wordt verkleind.

Behuizing Snapmaker 2.0

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

Laser
Protection

Physical
Safeguards

Dust
Isolation

Exhaust
System

Tri-fold
Magnetic Doors

Door
Detection

Behuizing Snapmaker 2.0

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

Laser
Protection

Physical
Safeguards

Dust
Isolation

Exhaust
System

Tri-fold
Magnetic Doors

Door
Detection

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .

Stofbestendigheid

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Stofbestendigheid

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Ruisonderdrukking

The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.

Ruisonderdrukking

The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.

Detectie van deur

Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.

Detectie van deur

Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.

Houd de Temperatuur correct

Warmte wordt opgeslagen tijdens 3D-printen met hoogwaardige filamenten zoals ABS, zodat het printen minder gevoelig is voor vervorming door temperatuurschommelingen.

Houd de Temperatuur correct

Warmte wordt opgeslagen tijdens 3D-printen met hoogwaardige filamenten zoals ABS, zodat het printen minder gevoelig is voor vervorming door temperatuurschommelingen.

Built-in LED Strips

Create as you like, whether it’s day or night.

Built-in LED Strips

Create as you like, whether it’s day or night.

Custom Software Support

Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.

Custom Software Support

Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.

All-purpose Beams for Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

All-purpose Beams for
Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

Kenmerken

A350T/F350/A350 Enclosure

A250T/F250/A250 Enclosure

Nettogewicht
19,3 kg

Nettogewicht
14,2 kg

Package Dimensions(W × D × H)
900 × 690 × 180 mm

Package Dimensions(W × D × H)
700 × 600 × 260 mm

Verpakkingsgewicht :
22.8 kg

Verpakkingsgewicht :
16.5 kg

Frame materiaal
Aluminiumlegering

Frame materiaal
Aluminiumlegering

Paneelmateriaal
Acryl

Paneelmateriaal
Acryl

Functionele eenheden
LED Strips, Exhaust Fan, Hose

Functionele eenheden
LED Strips, Exhaust Fan, Hose

Kenmerken

A350T/F350/A350 Enclosure

Nettogewicht
19,3 kg

Package Dimensions(W × D × H)
900 × 690 × 180 mm

Verpakkingsgewicht :
22.8 kg

Frame materiaal
Aluminiumlegering

Paneelmateriaal
Acryl

Functionele eenheden
LED Strips, Exhaust Fan, Hose


A250T/F250/A250 Enclosure

Nettogewicht
14,2 kg

Package Dimensions(W × D × H)
700 × 600 × 260 mm

Verpakkingsgewicht :
16.5 kg

Frame materiaal
Aluminiumlegering

Paneelmateriaal
Acryl

Functionele eenheden
LED Strips, Exhaust Fan, Hose

In het vak[5]

Side Folding Door
×1

Side Panel
×1

Top Panel
×1

Slang
 
×1

Back Panel
×1

Front Folding Door
×1

24 Beam A350-1
×2

48CA Beam A350-1
×1

24 Beam A350-2
×3

48CA Beam A350-2
×1

24 Beam A350-3
with Hall Switch
×1

48CA Beam A350-3
×1

24 Beam A350-4
×1

48CA Beam A350-4
×1

24 Beam A350-4 with
Enclosure Converter
×1

LED Strip Cable
×2

Quick Start Guide
×1

Exhaust Fan
×1

Hose Connector
×1

Ondersteuning voor touchscreens
×1

Cable Clip
×20

Connecting Cable  
×1

Foot Fixture
×4

Folding Door Slider
×8

Snap Bushing  
×1

Hose Clamp
×1

M3 Hex Nut
×8

M3 × 10 Hex Socket
Head Screw
×8

M4 Wing Nut
×4

M4 × 20 Hex Socket
Head Screw
×16

M4 × 28 Hex Socket
Short Head Screw
×32

M4 × 12 Hex Socket
Round Head Screw
×34

H2.0 Hex Key
×1

H2.5 Hex Key
×1

M4 × 35 Hex Socket
Head Screw
×4

In het vak[5]

Side Folding Door
×1

Side Panel
×1

Top Panel
×1

Slang
 
×1

Back Panel
×1

Front Folding Door
×1

24 Beam A350-1
×2

48CA Beam A350-1
×1

24 Beam A350-2
×3

48CA Beam A350-2
×1

24 Beam A350-3
with Hall Switch
×1

48CA Beam A350-3
×1

24 Beam A350-4
×1

48CA Beam A350-4
×1

24 Beam A350-4 with
Enclosure Converter
×1

LED Strip Cable
×2

Quick Start Guide
×1

Exhaust Fan
×1

Hose Connector
×1

Ondersteuning voor touchscreens
×1

Cable Clip
×20

Connecting Cable  
×1

Foot Fixture
×4

Folding Door Slider
×8

Snap Bushing  
×1

Hose Clamp
×1

M3 Hex Nut
×8

M3 × 10 Hex Socket
Head Screw
×8

M4 Wing Nut
×4

M4 × 20 Hex Socket
Head Screw
×16

M4 × 28 Hex Socket
Short Head Screw
×32

M4 × 12 Hex Socket
Round Head Screw
×34

H2.0 Hex Key
×1

H2.5 Hex Key
×1

M4 × 35 Hex Socket
Head Screw
×4

Opmerkingen :

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.

[3] The A150 Enclosure's doors are magnetic, but can't be folded.

[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.

Opmerkingen :

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.

[3] The A150 Enclosure's doors are magnetic, but can't be folded.

[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.

Customer Reviews

Based on 233 reviews
62%
(145)
27%
(64)
7%
(16)
1%
(3)
2%
(5)
F
Fabio Marchesi
regards

Sometimes delivery times get longer, in any case everything is ok and very efficient.thank you

F
Foxy's Art Box
Good investment, some hiccups

Purchased the enclosure along with the machine. Glad I did. Only have done 3D printing so far, plan on trying out the other functions soon once we pick up a filtration system.

Pros: The enclosure was fairly straight forward to assemble. It's nice to have the machine enclosed so we are assured nothing will interfere with the process. Love the light strips which provide a good way to double check that things are working--better than our older shop lighting. Doors provide easy access.

Cons: The screws that hold the main support rails were brittle--the heads snapped off several even without putting much pressure on them. This was not expected considering the cost. The foot print for this is quite large which meant for us having to place the machine sideways on the table (this is more of an issue with our old workshop layout--it's a heads-up to those who are thinking of buying the A350 to watch out for the size and make sure you have a space for it. We needed the larger bed and made it work.) This arrangement makes it awkward to reach the spool for changing. I doubt we are the only ones who have run into this issue. Alternative ways to place the spool rod would be an advantage--as well as a filament guide close to the machine itself to keep it in place near the uprights.

Overall--love having this piece of equipment. Well worth the money, just surprised by a few things.

B
Bob Minteer
Excellent enclosure

Very sturdy, highly functional and nice to look at too.

The only detractor is that the exhaust fan only pushes 30cfm. I added my own inline blower which pushes 130cfm. Made everything perfect.

C
Charles K Ballinger
Great Enclosure

Ordered enclosure at same time as system and the fit and finish, as well as the packaging remind me of Heathkit days when quality was number 1. Unit assembled without issue and in perfect condition.

A
Andrew Hewus Fresh
It's really helpful

Although I broke the heads off a couple of the very low profile screws, they included enough spares that it wasn't a problem. Since it has been assembled, I has been so nice for keeping the mess contained and the lights make it easy to see what's going on.