CNC-bits (5 bits) – Snapmaker EU

BESTEL SNAPMAKER 2.0 VOORAF EN BESPAAR NU TOT 180 EUR!

CNC-bits (5 bits)
CNC-bits (5 bits)
CNC-bits (5 bits)
CNC-bits (5 bits)

CNC-bits (5 bits)

Normale prijs
€14,99
Uitverkoopprijs
€12,74
Verzendkosten berekend bij het afrekenen.
Hoeveelheid moet meer zijn dan 1

Bestellingen worden binnen 3-5 werkdagen na betalingsbevestiging verzonden. Als uw bestelling bij de Snapmaker 2.0 wordt geplaatst, wordt deze met uw Snapmaker 2.0 verzonden.

Vijf (5) CNC-bits

Deze bundel bevat vijf CNC-bits (schachtdiameter: 3,175 mm):

  • Platte frees, dubbele fluit (snijdiameter: 3,175 mm) 
  • Platte frees, enkele fluit (snijdiameter: 3,175 mm)
  • Platte frees, enkele fluit (snijdiameter: 1,5 mm)
  • Kogelfrees
  • V-bit (Carving bit voor hout)

CNC Bits (5 bits)

High precision

Wide compatibility

Wear resistant

High precision

Wide compatibility

Wear resistance

Beschreibung

General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.

Flachschaftfräser

Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.

Kugelschaftfräser

With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.

Carving V-bit

With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Flachschaftfräser
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Kugelschaftfräser
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.

Vorzeigeprojekte

Astronaut (CNC Carving)

Wavy surface (CNC Carving)

Spezifikationen


Flat End Mill (double cut)

Flat End Mill (single cut 3.175)



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
3.175 mm / 0.125 "




Flat End Mill (double cut 1.5)

Kugelschaftfräser



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
12 mm / 0.472 "
 
Cutting Diameter
1.5 mm / 0.059 "
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
38 mm / 1.496 "
 
Flute Length
17 mm / 0.669 "
 
Cutting Diameter
3 mm / 0.117 "




Carving V-bit



Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008"
Schaftdurchmesser
3.175 mm / 0.125 "
 
Total Length
32 mm / 1.260 "
 
Angle
30 °
 
Tip Diameter
0.2 mm / 0.008 "

* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.

Customer Reviews

Based on 60 reviews
82%
(49)
10%
(6)
5%
(3)
0%
(0)
3%
(2)
N
Nick Roberts

Great to have a selection of bits in one set!

T
TheNorseman
CNC Bits for Snapmaker 2.0

I have been testing the 5 bits from Snapmaker on my machine and they works perfectly. There is not much else to say about them rater then that they works great.

P
Peter McClay
Panther

These cutters work fine in the Snapmaker. It would be great to be able a buy 5 off of each individual shapes/sizes not just a mixed set.

s
steve h.
snapmaker original

great quality, fast shipment and reasonably priced.

D
Duncan Wheaton
Cnc bits review ha ha

I am a complete newbie and got cnc bits when I bought my snapmaker 2. They arrived well packaged in very good time and were well labeled. I bought the snapmaker with cnc carving mainly in mind, however in the past 60 days, I am still to get past the 3d printing and laser etching with my machine working 24 hours a day. I love it and so far think everything about it is pretty much at an A+ standard. There is a learning curve however snapmaker tries to make it easy for first time users. I look foward to using the bits and am also glad that I have spares so when I get something wrong in settings and end up breaking a bit I can immidetly replace them. I am confident that they will be to the same standard that everything else around snapmaker is. Very Happy.

Back to the top
Dutch
Dutch