Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0
Behuizing voor Snapmaker 2.0

Behuizing voor Snapmaker 2.0

Regular price €599,00
/
Shipping calculated at checkout.

24 in stock

Afmeting

Bestellingen worden binnen 3-5 werkdagen na betalingsbevestiging verzonden. Als uw bestelling bij de Snapmaker 2.0 wordt geplaatst, wordt deze met uw Snapmaker 2.0 verzonden.

Algemene kenmerken:

  • Laserfiltering
  • Ruisonderdrukking
  • Geur-/dampenreductie
  • Stofdicht
  • Creëert een veilige en stabiele omgeving
  • Voorkomt kromtrekken en/of krimpen van ABS tijdens het printen
  • Houdt uw kinderen of huisdieren weg van mogelijke gevaren
  • Ledstrips, een afzuigventilator en een afvoerkanaal zijn inbegrepen

Afmetingen (L x B x H):

  • A350: 625 mm x 820 mm x 602 mm
  • A250: 531 mm x 624 mm x 507 mm
  • A150: 398 mm x 423 mm x 407 mm

Geschat verzendgewicht:

  • A350: 22.2 kg
  • A250: 16.5 kg
  • A150: 11.3 kg

De behuizing is gemaakt van een aluminiumlegering van vliegtuigkwaliteit en laserfilterende acrylplaat. Het is super eenvoudig te monteren omdat de deuren voorgemonteerd worden geleverd. De behuizing kan u en uw gezinsleden beschermen tegen mogelijke gevaren veroorzaakt door het lasergravure/snijproces. Wanneer een van de deuren wordt geopend, stopt de lasergravure/het snijproces automatisch; wanneer alle deuren gesloten zijn, kan u het lasergraveren/snijden hervatten via het aanraakscherm. (Deze functie voor deurdetectie werkt in de volgende scenario's: graveren/snijden via wifi- of USB-flashstation.) De behuizing maakt gebruik van een vouwdeurmechanisme en neemt minder ruimte in beslag, waardoor de kans op het breken van de acrylpanelen wordt verkleind.

Behuizing Snapmaker 2.0

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

Laser
Protection

Physical
Safeguards

Dust
Isolation

Exhaust
System

Tri-fold
Magnetic Doors

Door
Detection

Behuizing Snapmaker 2.0

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

Laser
Protection

Physical
Safeguards

Dust
Isolation

Exhaust
System

Tri-fold
Magnetic Doors

Door
Detection

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .

Stofbestendigheid

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Stofbestendigheid

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Ruisonderdrukking

The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.

Ruisonderdrukking

The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.

Detectie van deur

Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.

Detectie van deur

Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.

Houd de Temperatuur correct

Warmte wordt opgeslagen tijdens 3D-printen met hoogwaardige filamenten zoals ABS, zodat het printen minder gevoelig is voor vervorming door temperatuurschommelingen.

Houd de Temperatuur correct

Warmte wordt opgeslagen tijdens 3D-printen met hoogwaardige filamenten zoals ABS, zodat het printen minder gevoelig is voor vervorming door temperatuurschommelingen.

Built-in LED Strips

Create as you like, whether it’s day or night.

Built-in LED Strips

Create as you like, whether it’s day or night.

Custom Software Support

Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.

Custom Software Support

Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.

All-purpose Beams for Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

All-purpose Beams for
Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

Kenmerken

A350T/F350/A350 Enclosure

A250T/F250/A250 Enclosure

Nettogewicht
19,3 kg

Nettogewicht
14,2 kg

Package Dimensions(W × D × H)
900 × 690 × 180 mm

Package Dimensions(W × D × H)
700 × 600 × 260 mm

Verpakkingsgewicht :
22.8 kg

Verpakkingsgewicht :
16.5 kg

Frame materiaal
Aluminiumlegering

Frame materiaal
Aluminiumlegering

Paneelmateriaal
Acryl

Paneelmateriaal
Acryl

Functionele eenheden
LED Strips, Exhaust Fan, Hose

Functionele eenheden
LED Strips, Exhaust Fan, Hose

Kenmerken

A350T/F350/A350 Enclosure

Nettogewicht
19,3 kg

Package Dimensions(W × D × H)
900 × 690 × 180 mm

Verpakkingsgewicht :
22.8 kg

Frame materiaal
Aluminiumlegering

Paneelmateriaal
Acryl

Functionele eenheden
LED Strips, Exhaust Fan, Hose


A250T/F250/A250 Enclosure

Nettogewicht
14,2 kg

Package Dimensions(W × D × H)
700 × 600 × 260 mm

Verpakkingsgewicht :
16.5 kg

Frame materiaal
Aluminiumlegering

Paneelmateriaal
Acryl

Functionele eenheden
LED Strips, Exhaust Fan, Hose

In het vak[5]

Side Folding Door
×1

Side Panel
×1

Top Panel
×1

Slang
 
×1

Back Panel
×1

Front Folding Door
×1

24 Beam A350-1
×2

48CA Beam A350-1
×1

24 Beam A350-2
×3

48CA Beam A350-2
×1

24 Beam A350-3
with Hall Switch
×1

48CA Beam A350-3
×1

24 Beam A350-4
×1

48CA Beam A350-4
×1

24 Beam A350-4 with
Enclosure Converter
×1

LED Strip Cable
×2

Quick Start Guide
×1

Exhaust Fan
×1

Hose Connector
×1

Ondersteuning voor touchscreens
×1

Cable Clip
×20

Connecting Cable  
×1

Foot Fixture
×4

Folding Door Slider
×8

Snap Bushing  
×1

Hose Clamp
×1

M3 Hex Nut
×8

M3 × 10 Hex Socket
Head Screw
×8

M4 Wing Nut
×4

M4 × 20 Hex Socket
Head Screw
×16

M4 × 28 Hex Socket
Short Head Screw
×32

M4 × 12 Hex Socket
Round Head Screw
×34

H2.0 Hex Key
×1

H2.5 Hex Key
×1

M4 × 35 Hex Socket
Head Screw
×4

In het vak[5]

Side Folding Door
×1

Side Panel
×1

Top Panel
×1

Slang
 
×1

Back Panel
×1

Front Folding Door
×1

24 Beam A350-1
×2

48CA Beam A350-1
×1

24 Beam A350-2
×3

48CA Beam A350-2
×1

24 Beam A350-3
with Hall Switch
×1

48CA Beam A350-3
×1

24 Beam A350-4
×1

48CA Beam A350-4
×1

24 Beam A350-4 with
Enclosure Converter
×1

LED Strip Cable
×2

Quick Start Guide
×1

Exhaust Fan
×1

Hose Connector
×1

Ondersteuning voor touchscreens
×1

Cable Clip
×20

Connecting Cable  
×1

Foot Fixture
×4

Folding Door Slider
×8

Snap Bushing  
×1

Hose Clamp
×1

M3 Hex Nut
×8

M3 × 10 Hex Socket
Head Screw
×8

M4 Wing Nut
×4

M4 × 20 Hex Socket
Head Screw
×16

M4 × 28 Hex Socket
Short Head Screw
×32

M4 × 12 Hex Socket
Round Head Screw
×34

H2.0 Hex Key
×1

H2.5 Hex Key
×1

M4 × 35 Hex Socket
Head Screw
×4

Opmerkingen :

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.

[3] The A150 Enclosure's doors are magnetic, but can't be folded.

[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.

Opmerkingen :

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.

[3] The A150 Enclosure's doors are magnetic, but can't be folded.

[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.

Customer Reviews

Based on 244 reviews
62%
(152)
27%
(65)
8%
(19)
1%
(3)
2%
(5)
T
Timothy Blose

Enclosure for Snapmaker 2.0

R
Raymond Bauschke

Enclosure for Snapmaker 2.0

R
Richard Bew
Beautiful enclosure, but safety?

The enclosure is gorgeous and the design is very clever, giving you access to the two most important sides of the machine and allowing you to mount wire clips and accessories to the rails. The enclosure is ideal for CNC and 3D printing.

I hesitate to rate more highly because there is NO safety information pertaining to the optical density of the colored acrylic. The software states OD6+ laser glasses should be used in addition to the enclosure when using their 10W laser. The store page states that the enclosure is “laser filtering” but as far as my research goes, it’s use at your own risk for lower power engraving or the 1.6W laser.

OD rated materials are expensive, and I wouldn’t necessarily expect Snapmaker to use them in this enclosure, but Snapmaker is being safety lackadaisical by implying that it’s safe or approved in any capacity for use with lasers. I’d rather they be honest and say it may offer protection, but isn’t rated. Inevitably one of their customers will damage an eye and it’s going to come down to this.

If you’re okay wearing laser filtering glasses when using the laser, this enclosure is ideal. If you’re expecting the enclosure will make safety glasses unnecessary, look elsewhere or build something completely opaque.

W
WEAR
A must have for laser

Fits perfectly....not going to lie it was a pain to set up. Follow the directions ...don't stop the screws...use a hand held driver not a screw gun

T
Tamás Háber
Good

Very good.