Iscriviti per ricevere aggiornamenti sui nostri nuovi prodotti e sulle promozioni esclusive.
IVA inclusa
Product Overview
• Forms the core of the U1 Top Cover’s three-stage air filtration system, combining a G3 pre-filter, an H12 HEPA filter, and coconut-shell activated carbon.
• When printing high-temperature filaments such as ABS, ASA, PA, and PC, the filter helps capture airborne particles, including PM2.5, and reduce VOCs and odors.
• Compatible with Snapmaker U1 Top Cover's internal circulation mode to provide continuous in-chamber air filtration.
Compatibilità
U1 Top Cover
Raccomandazioni
As low as €18,40/roll (2+ rolls) | €16,10/roll (4+ rolls) |€14,95/roll (6+ rolls) | €13,11/roll (10+ rolls)
As low as €18,40/roll (2+ rolls) | €16,10/roll (4+ rolls) |€14,95/roll (6+ rolls) | €13,11/roll (10+ rolls)
Metodi di pagamento
Consegna
• UE (esclusi Cipro e Malta): spedizione dal magazzino in Germania · 1–2 giorni lavorativi per la spedizione · 2–7 giorni lavorativi per la consegna dopo la spedizione
• CY & MT: Spedizione dal magazzino in Germania · Spedizione entro 1–2 giorni lavorativi · Consegna entro 15-30 giorni lavorativi dalla spedizione
Coperture per macchine e moduli, ad eccezione degli articoli coperti da garanzia limitata e dei materiali di consumo.
Resi entro 14 giorni e rimborsi ammissibili.
Se il prezzo scende entro 30 giorni, riceverai la differenza sotto forma di buono regalo.
Combining a G3 pre-filter, coconut-shell activated carbon, and an H12 HEPA filter, this filter helps capture airborne particles (including PM2.5) and reduce VOCs and odors when printing high-temperature filaments such as ABS, ASA, PA, and PC. Works with the U1 Top Cover in internal circulation mode to filter chamber air.
Combining a G3 pre-filter, coconut-shell activated carbon, and an H12 HEPA filter, this filter helps capture airborne particles (including PM2.5) and reduce VOCs and odors when printing high-temperature filaments such as ABS, ASA, PA, and PC. Works with the U1 Top Cover in internal circulation mode to filter chamber air.
Combining a G3 pre-filter, coconut-shell activated carbon, and an H12 HEPA filter, this filter helps capture airborne particles (including PM2.5) and reduce VOCs and odors when printing high-temperature filaments such as ABS, ASA, PA, and PC. Works with the U1 Top Cover in internal circulation mode to filter chamber air.
Combining a G3 pre-filter, coconut-shell activated carbon, and an H12 HEPA filter, this filter helps capture airborne particles (including PM2.5) and reduce VOCs and odors when printing high-temperature filaments such as ABS, ASA, PA, and PC. Works with the U1 Top Cover in internal circulation mode to filter chamber air.
Step 1: Open the filter compartment cover.
Step 2: Pull the tab to remove the old filter.
Step 3: Insert the new filter with the arrow on its side pointing up.
Step 4: Slide the cover closed.
Step 1: Open the filter compartment cover.
Step 2: Pull the tab to remove the old filter.
Step 3: Insert the new filter with the arrow on its side pointing up.
Step 4: Slide the cover closed.
Filtro
× 1
Sealed Plastic Bag
× 1
Scatola di imballaggio in carta
× 1
Filtro
× 1
Sealed Plastic Bag
× 1
Scatola di imballaggio in carta
× 1
Dimensions (L×W×H)
140 × 80 × 55 mm
Packaging Dimensions (L×W×H)
Without Bubble Bag: 150 × 90 × 60 mm
With Bubble Bag: 200 × 150 × 80 mm
Peso netto
230 ± 20 g
Gross Weight
270 ± 20 g
Materiali
Coconut Shell Charcoal, PP, PET, Polyester Fiber, Sponge
Grado del prefiltro
G3
Grado del filtro HEPA
H12
Tipo di filtro a carbone attivo
Carbone attivo da guscio di cocco
Filtrazione dei COV
Supportato
Filtrazione del particolato
Supportato
Dimensions (L×W×H)
140 × 80 × 55 mm
Packaging Dimensions (L×W×H)
Without Bubble Bag: 150 × 90 × 60 mm
With Bubble Bag: 200 × 150 × 80 mm
Peso netto
230 ± 20 g
Gross Weight
270 ± 20 g
Materiali
Coconut Shell Charcoal, PP, PET, Polyester Fiber, Sponge
Grado del prefiltro
G3
Grado del filtro HEPA
H12
Tipo di filtro a carbone attivo
Carbone attivo da guscio di cocco
Filtrazione dei COV
Supportato
Filtrazione del particolato
Supportato
Product Overview
• Forms the core of the U1 Top Cover’s three-stage air filtration system, combining a G3 pre-filter, an H12 HEPA filter, and coconut-shell activated carbon.
• When printing high-temperature filaments such as ABS, ASA, PA, and PC, the filter helps capture airborne particles, including PM2.5, and reduce VOCs and odors.
• Compatible with Snapmaker U1 Top Cover's internal circulation mode to provide continuous in-chamber air filtration.
Compatibilità
U1 Top Cover
Opzione
