Name: PLA Glow Filament (RFID) - 1kg
Brand: Snapmaker
SKU: 34344
Price: 24.99 EUR
Availability: InStock

PLA Glow Filament (RFID) - 1kg

Snapmaker PLA Glow

This filament contains luminous powder. Due to the increased risk of clogging, do not use hot ends smaller than 0.4 mm. As luminous powder is abrasive, use Hardened Steel Hot Ends (sold separately) and load filament manually to prevent wear on the automatic filament feeders.

Si illumina al buio

PLA Glow contains luminous powder that brings your prints to life in the dark. Simply charge under a bright lamp or in bright natural light near a window for 10 minutes^[1] to activate the glow. Recharge and enjoy the glow, again and again.

Light Up Your Creativity

Create cosplay props, add glowing accents to your models, or craft desk ornaments and wall decorations. Let your creativity shine in the dark.

Colors for Creativity

Choose from a selection of vibrant colors to suit different models and creative styles. Enjoy their colors in bright settings and discover a distinctive glow in low-light conditions.

Riconoscimento RFID^[2]

When used with the Snapmaker U1, the printer automatically loads preset filament information for a more convenient printing experience.

Bobine e imballaggi riciclati

Sia la bobina che la scatola di imballaggio sono realizzate con materiali riciclati, riducendo così l'uso di materie prime vergini.

Nota bene

To activate the glow of PLA Glow filament or printed objects, place them under a bright desk lamp or in bright natural light near a window for about 10 minutes. After the light source is removed, the glow remains clearly visible for about 5 minutes before gradually fading, with a faint afterglow lasting up to around 40 minutes in total. To restore a more noticeable glow, expose the filament or printed object to light again. Avoid prolonged light exposure, as it may accelerate material aging.

Consigli per la stampa

Essiccazione e conservazione

• Pre-Drying: The filament has moderate moisture sensitivity, so drying before use is optional. However, pre-drying is recommended for optimal print results. The recommended setting is 55°C for 8 hours.
• Storage: Prolonged exposure to direct sunlight will cause the material to fade and become brittle. When not in use, store the filament in a dry place away from direct sunlight to maintain consistent print quality.

Stampa

• Hotend Selection: Do not use hotends with nozzle diameters smaller than 0.4 mm, as the luminous powder may cause clogging.
• Use Hardened Steel Hotends: This filament may wear down stainless steel hotends. Use hardened steel hotends instead.
• Use Manual Loading: The luminous powder makes this filament abrasive and may accelerate wear on the printer’s automatic filament feeder. To protect the feeder, do not use the automatic feeding function. Always load and unload the filament manually. (Note: RFID readers are located near the spool holders on both sides of the printer. During manual loading, RFID detection is available only when the spool is placed on a holder.)

Specifiche tecniche

Condizioni di stampa consigliate

* Valori riferiti a un ugello da 0,4 mm. Le condizioni di stampa possono variare a seconda del diametro dell'ugello.

Temperatura dell'ugello

200–230°C

Temperatura del letto

25–70 °C

Ventola di raffreddamento

80%

Velocità di stampa

Fino a 200 mm/s

Impostazioni di asciugatura prima della stampa

55 °C per 8 ore

Proprietà fisiche

Densità

1.26 g/cm³

Indice di fusione

23.3 ± 2.4 g/10 min (210℃, 2.16 kg)

Temperatura di fusione

155°C

Temperatura di transizione vetrosa

55°C

Temperatura di rammollimento Vicat

56°C

Temperatura di deflessione al calore

55°C

Tasso di assorbimento dell'acqua satura

0.46%

Proprietà meccaniche

Resistenza alla trazione (X-Y)

30 ± 4.1 MPa

Resistenza alla trazione (Z)

25.3 ± 0.7 MPa

Tasso di allungamento a rottura (X-Y)

8.1 ± 1.5%

Tasso di allungamento a rottura (Z)

7.2 ± 0.9%

Modulo di flessione (X-Y)

2710 ± 80 MPa

Modulo di flessione (Z)

2320 ± 229.3 MPa

Resistenza alla flessione (X-Y)

78.9 ± 3.2 MPa

Resistenza alla flessione (Z)

62 ± 4.6 MPa

Resistenza all'urto (X-Y)

30.1 ± 1.2 kJ/m²

Resistenza all'urto (Z)

18.3 ± 0.9 kJ/m²

Condizioni di stampa consigliate

*Con ugello da 0,4 mm. Le condizioni di stampa possono variare a seconda del diametro dell'ugello.

Temperatura dell'ugello

200–230°C

Temperatura del letto

25–70 °C

Ventola di raffreddamento

80%

Velocità di stampa

Fino a 200 mm/s

Impostazioni di asciugatura prima della stampa

55 °C per 8 ore

Proprietà fisiche

Densità

1.26 g/cm³

Indice di fusione

23.3 ± 2.4 g/10 min (210℃, 2.16 kg)

Temperatura di fusione

155°C

Temperatura di transizione vetrosa

55°C

Temperatura di rammollimento Vicat

56°C

Temperatura di deflessione al calore

55°C

Tasso di assorbimento dell'acqua satura

0.46%

Proprietà meccaniche

Resistenza alla trazione (X-Y)

30 ± 4.1 MPa

Resistenza alla trazione (Z)

25.3 ± 0.7 MPa

Tasso di allungamento a rottura (X-Y)

8.1 ± 1.5%

Tasso di allungamento a rottura (Z)

7.2 ± 0.9%

Modulo di flessione (X-Y)

2710 ± 80 MPa

Modulo di flessione (Z)

2320 ± 229.3 MPa

Resistenza alla flessione (X-Y)

78.9 ± 3.2 MPa

Resistenza alla flessione (Z)

62 ± 4.6 MPa

Resistenza all'urto (X-Y)

30.1 ± 1.2 kJ/m²

Resistenza all'urto (Z)

18.3 ± 0.9 kJ/m²

Risorse sui prodotti

Icona che raffigura un documento PDF con delle righe di testo sopra.

Scheda tecnica

Guida per l'utente

Tabella dei codici esadecimali

Scheda tecnica

Guida per l'utente

Tabella dei codici esadecimali

Contenuto della confezione

Filamento in bobina sigillata × 1

Essiccante× 1

Scatola di imballaggio in carta× 1

Filamento in bobina sigillata × 1

Essiccante × 1

Scatola di imballaggio in carta × 1

Note:
[1] Data is from the Snapmaker laboratory. Actual light absorption and afterglow duration depend on light intensity, exposure time, and other factors. Glow brightness gradually fades over time. Actual results may vary.
[2] RFID function is only available for the Snapmaker U1.

Domande frequenti

1. Compatibilità

• Snapmaker U1: Optimized profiles built into Snapmaker Orca.
• Other printers: Supports most FDM 3D printers. Manual adjustment of printing settings may be required.

2. What nozzle diameter should I use with Snapmaker PLA Glow?

Use a nozzle with a diameter of 0.4 mm or larger. Do not use nozzles smaller than 0.4 mm, as the luminous powder in the filament may cause clogging.

3. Can I use a stainless steel nozzle with Snapmaker PLA Glow?

We recommend using a hardened steel nozzle. The luminous powder in PLA Glow is abrasive and may accelerate wear on stainless steel nozzles. Hardened steel nozzles offer better wear resistance when printing this material.

4. Can I use the automatic filament feeder with Snapmaker PLA Glow?

Do not use the automatic filament feeding function. Always load and unload the filament manually. The abrasive luminous powder may accelerate wear on the automatic filament feeder. Manual loading and unloading help reduce this risk.

5. What are the recommended printing settings for Snapmaker PLA Glow?

You can use the pre-configured Snapmaker PLA Glow filament profile in Snapmaker Orca for convenient setup. If you prefer to configure the settings manually, the following recommendations are based on testing with a 0.4 mm nozzle.

Parametro	Recommended Setting
Temperatura dell'ugello	200–230°C
Temperatura del letto	25–70 °C
Ventola di raffreddamento	80%
Velocità di stampa	Fino a 200 mm/s
Drying Before Printing	55°C for 8 hours

These settings are based on testing with a 0.4 mm nozzle. Actual printing conditions may vary depending on the printer, nozzle diameter, and model.

6. Build Plate Recommendation

Piastra di stampa	Compatibilità
Piastra in PEl testurizzata	Compatibile
Piastra liscia in PEI	Compatibile
Piastra per effetti grafici	Compatibile

Note:
1. If the printed model adheres too strongly to the build plate, allow the plate to cool before attempting removal. Follow the printer's safety instructions and the build plate manufacturer's recommendations. If a suitable release method is needed, ensure the plate is cool and follow the relevant product instructions.
2. If the first layer does not adhere properly, check the bed leveling and clean the build plate. If the issue persists, apply a suitable glue stick or liquid glue, provided it is compatible with the build plate.

7. Do I need to dry Snapmaker PLA Glow filament before printing?

We recommend drying all filaments before printing for optimal print quality. Snapmaker PLA Glow has moderate moisture sensitivity, and the recommended drying settings are 55°C for 8 hours.

8. How should I store Snapmaker PLA Glow filament?

Store the filament in a sealed, dry environment away from direct sunlight. Prolonged exposure to outdoor conditions and direct sunlight may reduce the material's color vibrancy and make it brittle, potentially affecting its appearance and performance.

9. How long does the glow-in-the-dark effect last?

After the light source is removed, the glow gradually fades and may become barely visible after approximately 10 minutes. A faint afterglow may persist for up to 40 minutes in total, depending on the light source and exposure conditions. To restore a more noticeable glow, expose the filament or printed object to light again. Avoid prolonged light exposure, as it may accelerate material aging.

10. How do I activate the glow-in-the-dark effect?

Expose the filament or printed object to a bright desk lamp or bright natural light near a window for 10 minutes to activate the glow. The intensity and duration of the glow depend on the light intensity, exposure time, and other conditions.

11. Can I recharge the glow-in-the-dark effect?

Yes. Expose the printed object to a bright desk lamp or bright natural light near a window for 10 minutes to reactivate the glow. You can repeat this process to enjoy the glow again.
However, avoid prolonged or excessive light exposure, as it may accelerate material aging.

Rimani aggiornato!

PLA Glow Filament (RFID) - 1kg

Filamento RFID in primo piano

Filamento RFID in primo piano

Filamento PETG-CF (RFID) - 1 kg

Filamento PLA traslucido (RFID) - 1 kg

Filamento PETG traslucido (RFID) - 1 kg

Filamento PETG HF (RFID) - 1 kg

Filamento PLA-CF (RFID) - 1 kg

Filamento PLA SnapSpeed (RFID) - 1 kg

Filamento PLA opaco (RFID) - 1 kg

Filamento PLA bicolore Silk (RFID) - 1 kg

Filamento PLA Silk (RFID) - 1 kg

Filamento TPU 95A HF (RFID) - 1 kg

Filamento PLA effetto legno (RFID) - 1 kg

Snapmaker PLA Glow

Si illumina al buio

Light Up Your Creativity

Colors for Creativity

Riconoscimento RFID[2]

Bobine e imballaggi riciclati

Nota bene

Consigli per la stampa

Specifiche tecniche

Risorse sui prodotti

Contenuto della confezione

1. Compatibilità

2. What nozzle diameter should I use with Snapmaker PLA Glow?

3. Can I use a stainless steel nozzle with Snapmaker PLA Glow?

4. Can I use the automatic filament feeder with Snapmaker PLA Glow?

5. What are the recommended printing settings for Snapmaker PLA Glow?

6. Build Plate Recommendation

7. Do I need to dry Snapmaker PLA Glow filament before printing?

8. How should I store Snapmaker PLA Glow filament?

9. How long does the glow-in-the-dark effect last?

10. How do I activate the glow-in-the-dark effect?

11. Can I recharge the glow-in-the-dark effect?

PLA Glow Filament (RFID) - 1kg

Riconoscimento RFID^[2]