🚛 Spedizione gratuita per ordini superiori a 89 €.

💰Garanzia di prezzo pari al miglior prezzo sul mercato per 30 giorni: se il prezzo scende entro 30 giorni, riceverai la differenza sotto forma di buono regalo.

🛠️Garanzia di 2 anni: copre tutte le macchine e i moduli.

Seleziona il tuo Paese / la tua regione in base all'indirizzo di spedizione
I prezzi e la disponibilità dei prodotti possono variare a seconda del Paese o della regione.
Rimani aggiornato!

Rimani aggiornato!

Iscriviti per ricevere aggiornamenti sui nostri nuovi prodotti e sulle promozioni esclusive.

Sembra che tu ti trovi in un'altra regione. Passa al negozio consigliato per conoscere le tariffe di spedizione e i prezzi locali.
Passa subito

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

IVA inclusa

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Supporto e impostazioni della stampante:
• Snapmaker U1: profili ottimizzati integrati in Snapmaker Orca.
• Altre stampanti: supporta la maggior parte delle stampanti 3D FDM; potrebbe essere necessaria una regolazione manuale.

Scopri di più Nascondi
Opzione

Raccomandazioni

Filamento PLA Glow (RFID) - 1 kg
Vendita all'ingrosso di filamenti
Filamento RFID in primo piano

A partire da 18,40 € al rotolo(2 o più rotoli) | 16,10 € al rotolo(4 o più rotoli) |14,95 € al rotolo(6 o più rotoli) | 13,11 € al rotolo(10 o più rotoli)

Vendita all'ingrosso di filamenti
Filamento RFID in primo piano

A partire da 18,40 € al rotolo(2 o più rotoli) | 16,10 € al rotolo(4 o più rotoli) |14,95 € al rotolo(6 o più rotoli) | 13,11 € al rotolo(10 o più rotoli)

Giallo brillante (F8FF80)
Filamento PLA Glow (RFID) - 1 kg
€24,99
Giallo brillante (F8FF80)
Giallo brillante (F8FF80)
Arancione brillante (FF9D5B)
Rosa brillante (F17B8F)
Arcobaleno pastello
Filamento PLA Rainbow (RFID) - 1 kg
€24,99
Filamento PLA Rainbow (RFID) - 1 kg
Filamento PLA Rainbow (RFID) - 1 kg
Giallo traslucido (FFF200)
Filamento PLA traslucido (RFID) - 1 kg
€22,99
Giallo traslucido (FFF200)
Giallo traslucido (FFF200)
Verde traslucido (008729)
Grigio chiaro traslucido (B1ACA6)
Blu traslucido (46BAE0)
Rosa traslucido (EEBCC8)
Magenta traslucido (DC0080)
Rosso scuro traslucido (990002)
Violet (493AB2)
Filamento PETG HF (RFID) - 1 kg
€22,99
Violet (493AB2)
Violet (493AB2)
Nero (16171B)
Bianco (F4F9FF)
Grigio chiaro (ACB8C5)
Rosso (FF1523)
Orange (FB7E1B)
Blu cobalto (0049B8)
Grigio argento (7C818E)
Deep Purple (473378)
Cocoa Brown (6B504C)
Giallo (FBE95C)
Verde (38B837)
Verde scuro (223622)
Rosa chiaro (F5BEE9)
Marrone rossiccio (7E2D40)
Saga Green (A3B2A4)
Blu ghiaccio (B1E4E3)
Blu oceano (4EC3E0)
Viola iris (685BC7)
Verde mela (9DF48F)
Avocado Green(436E42)
Acquamarina (53EECA)
Blu fiordaliso (4895F9)
Blu inchiostro (1A4E8A)
Rosso vino (823F2E)
Filamento PLA-CF (RFID) - 1 kg
€29,99
Rosso vino (823F2E)
Rosso vino (823F2E)
Verde Matcha (6F8653)
Grigio grafite (54555B)
Viola (725E7C)
Marrone castagna (9B7C56)
Blu denim (49799D)
Nero (000000)
Rosa (FFC0CB)
Filamento PLA SnapSpeed (RFID) - 1 kg
€22,99
Rosa (FFC0CB)
Rosa (FFC0CB)
Crema (FFF5E0)
Bianco freddo (D9DFE5)
Magenta (F24574)
Azzurro (5EBDDB)
Giallo brillante (F8F81C)
Verde oliva (AFC33C)
Blu grigio (94B7C9)
Beige caldo (C19E86)
Cocoa Brown (674B47)
Blu (003776)
Verde (2D9E59)
Grigio (8C9099)
Viola (6C5BB1)
Marrone (6F4C2F)
Arancione (F97429)
Nero (080A0D)
Giallo (F4C032)
Bianco perla (E2DEDB)
Rosso (E72F1D)
Blu turchese (53D6D0)
Blu azzurro (0066D9)
Grigio antracite (485259)
Burgundy Red(911821)
Beige pesca (EEDDD2)
Marrone caramello (CB8748)
Verde militare (31532E)
Verde menta (AFD6C1)
Viola chiaro (D3D0EB)
Viola prugna (660066)
Bianco avorio (FFFFFF)
Filamento PLA opaco (RFID) - 1 kg
€22,99
Bianco avorio (FFFFFF)
Bianco avorio (FFFFFF)
Nero di carbonio (000000)
Arancione lava (F78E0E)
Blu celeste (8BD5EE)
Rosa Sakura (F3D6E5)
Grigio cenere (485155)
Rosso anguria (FC6371)
Blu marino (0078BF)
Marrone latte (D3B7A7)
Crema al burro (FEE5A5)
Viola (6600CC)
Viola lavanda (AE96D4)
Marrone moka (775C50)
Verde lime (D4E458)
Verde oliva (68724D)
Steel Blue(2E4462)
Azzurro cielo (56B7E6)
Rosso terracotta (D84B2E)
Pervinca (ADB4E6)
Sunburst Yellow (F0BE02)
Verde pino (519F61)
Rosso motore (DE1619)
Moss Mist (BEC9A5)
Sunset Ember (D9A63A+CC434F)
Filamento PLA bicolore Silk (RFID) - 1 kg
€24,99
Sunset Ember (D9A63A+CC434F)
Sunset Ember (D9A63A+CC434F)
Aurora Gold (D9A63A+9675CD)
Lega solare (D9A63A+C4C7D9)
Limonata alla menta (ECED17+44ADE5)
Sea Glass(44ADE5+18CCAF)
Ice Lake (C4C7D9+44ADE5)
Cartellone pubblicitario urbano (CBF914+D623AA)
Data di spedizione prevista: metà giugno
Bianco perla (DFE4E4)
Filamento PLA Silk (RFID) - 1 kg
€22,99
Bianco perla (DFE4E4)
Bianco perla (DFE4E4)
Oro (F6CE1B)
Argento (BCC2C8)
Rame (AF6B4C)
Rosso granato (C1443F)
Rosa perla (EFC2CA)
Blu zaffiro (768EC7)
Verde neon (A8FF54)
Aqua Blue(4CC1CB)
Verde smeraldo (55B687)
Nero inchiostro (363538)
Arancione brillante (EB6232)
Verde oliva (7F865B)
Champagne (F3CFB2)
Nero (000000)
Filamento TPU 95A HF (RFID) - 1 kg
€41,99
Nero (000000)
Nero (000000)
Bianco (FFFFFF)
Grigio argento (9E9E9E)
Marrone (865B41)
Blu brillante (0683EF)
Red (EE2A20)
Grigio scuro (595E69)
Giallo (FFC72C)
Verde (33A15A)
Rovere (C0A086)
Filamento PLA effetto legno (RFID) - 1 kg
€24,99
Rovere (C0A086)
Rovere (C0A086)
Acero (F2C6A2)
Noce (775C50)
Legno di rosa (AE7575)

Metodi di pagamento

  • American Express
  • Apple Pay
  • Carte di credito
  • Diners Club
  • Scopri
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • PayPal
  • UnionPay
  • Visto
  • icona-pagamento
  • icona-pagamento
  • icona-pagamento
  • icona-pagamento
  • icona-pagamento

Consegna

• UE (esclusi CY e MT): spedizione dal magazzino in Germania · 1–2 giorni lavorativi per la spedizione · 2–7 giorni lavorativi per la consegna dopo la spedizione • CY e MT: spedizione dal magazzino in Germania · 1–2 giorni lavorativi per la spedizione · 15–30 giorni lavorativi per la consegna dopo la spedizione
Consegna
%3Cp%3EGuadagna%20[points_amount]%20acquistando%20questo%20articolo.%20-%20Il%20doppio%20durante%20i%20saldi%20BFCM%E2%9C%A8%3C/p%3E
PEBA 90A High Rebound Filament (RFID) - 800g

Snapmaker PEBA 90A

Text saying

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Button labeled 'Before You Buy' on a gray background.

PEBA 90A is sensitive to moisture and must be dried at 75 °C for 8 hours before printing. Use a hot end with a 0.4 mm or larger nozzle. We recommend using PETG / PLA as the support material.

Game On, Bounce On

Soft segments provide elasticity, while hard segments offer support, giving Snapmaker PEBA 90A a flexible feel with a lively bounce.
Ready to give it a try? Start with the mini airless basketball, a quick first print.

Same Drop, Higher Rise[2]

In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

Print Profile 0.4mm layer, 2 walls, 15% infill

Print Profile 0.4mm layer, 2 walls, 15% infill

Lightweight Feel, Longer Comfort

With a density of 1.01–1.05 g/cm³, PEBA 90A combines flexibility and support with less weight. It’s well suited to wearable parts such as sports guards and wrist supports, where a lighter feel can make extended wear more comfortable.

Fatigue Resistant, Rep After Rep

PEBA 90A withstands repeated compression and bending, helping flexible parts maintain their shape and rebound. A dependable choice for parts designed for repeated use.

Reliable Performance, Even in the Cold

Even as temperatures drop, PEBA 90A remains flexible and elastic, with less tendency to stiffen or become brittle. A suitable option for winter sports gear and outdoor functional parts.

Diverse Colors, Versatile Creations

Snapmaker PEBA 90A comes in 5 vibrant colors, bringing together functional performance and personal expression to open up more creative possibilities.

Bobine e imballaggi riciclati

Sia la bobina che la scatola di imballaggio sono realizzate con materiali riciclati, riducendo così l'uso di materie prime vergini.

Consigli per la stampa

Essiccazione e conservazione

• Dry Before Printing: PEBA 90A High Rebound Filament is sensitive to moisture. Thoroughly dry the filament before printing to reduce surface bubbles, stringing, and other issues. Recommended drying setting: 75°C for 8 hours.
• Store Properly: After opening, store the filament in a sealed container with desiccant. Keep the humidity below 20% during printing and storage, and avoid direct sunlight. Dry the filament again before reuse.

Stampa

• Use Manual Loading: As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Do not use an automatic filament feeder. Load the filament manually to improve the print success rate.
• Choose a Suitable Nozzle Size:
Do not use a hot end with a nozzle smaller than 0.4 mm. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm.
• Disable Dynamic Flow Calibration: Before printing, turn off "Dynamic Flow Calibration" to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament using the recommended settings before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, make sure the cooling fan is set to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage the bottom surface of the print. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: For better overhang surface quality and easier support removal, use PETG/PLA as the support material.

Specifiche tecniche

Condizioni di stampa consigliate

* Valori riferiti a un ugello da 0,4 mm. Le condizioni di stampa possono variare a seconda del diametro dell'ugello.    

Temperatura dell'ugello

220–250°C

Temperatura del letto

90–100 °C

Ventola di raffreddamento

ON

Velocità di stampa

Up to 107 mm/s

Impostazioni di asciugatura prima della stampa

75°C for 8 h

Proprietà fisiche    

Densità

1.01–1.05 g/cm³

Indice di fusione

8–16 g/10 min

Temperatura di fusione

125–165°C

Temperatura di rammollimento Vicat

≥105°C

Durezza costiera

90A

Rebound Resilience

65–70%

Proprietà meccaniche

Resistenza alla trazione (X-Y)

≥16.0 MPa

Resistenza alla trazione (Z)

7.0 MPa

Tasso di allungamento a rottura (X-Y)

≥500%

Tasso di allungamento a rottura (Z)

140%

Modulo di flessione (X-Y)

80 MPa

Condizioni di stampa consigliate

*Con ugello da 0,4 mm. Le condizioni di stampa possono variare a seconda del diametro dell'ugello.

Temperatura dell'ugello

220–250°C

Temperatura del letto

90–100 °C

Ventola di raffreddamento

ON

Velocità di stampa

Up to 107 mm/s

Impostazioni di asciugatura prima della stampa

75°C for 6 h

Proprietà fisiche

Densità

1.01–1.05 g/cm³

Indice di fusione

8–16 g/10 min

Temperatura di fusione

125–165°C

Temperatura di rammollimento Vicat

≥105°C

Durezza costiera

90A

Rebound Resilience

65–70%

Proprietà meccaniche

Resistenza alla trazione (X-Y)

≥16.0 MPa

Resistenza alla trazione (Z)

7.0 MPa

Tasso di allungamento a rottura (X-Y)

≥500%

Tasso di allungamento a rottura (Z)

140%

Modulo di flessione (X-Y)

80 MPa

Risorse sui prodotti

Icona che raffigura un documento PDF con delle righe di testo sopra.
Icona che raffigura un documento PDF con delle righe di testo sopra.
Icona che raffigura un documento PDF con delle righe di testo sopra.
Icona che raffigura un documento PDF con delle righe di testo sopra.
Icona che raffigura un documento PDF con delle righe di testo sopra.
Icona che raffigura un documento PDF con delle righe di testo sopra.

Contenuto della confezione

Filamento in bobina sigillata × 1

Essiccante× 1

Scatola di imballaggio in carta× 1

Filamento in bobina sigillata × 1

Essiccante × 1

Scatola di imballaggio in carta × 1

3D printing filament spool in orange packaging.

Note:
[1] Under ASTM D2632 test conditions, PEBA 90A achieves a rebound rate of up to 70%. Actual performance may vary depending on model geometry, print settings, and test conditions.
[2] In the demonstration, PEBA 90A and TPU 90A samples use the same basketball model, print settings, drop height, and impact surface. Results reflect the conditions shown only and may differ for other models or uses.
[3] Calculated at the same volume using density values of 1.01 g/cm³ for PEBA 90A and 1.12 g/cm³ for TPU 90A. Actual printed-part weight may vary depending on material density, model geometry, and print settings.

Domande frequenti

1. Compatibilità

• Snapmaker U1: Optimized filament profiles are available in Snapmaker Orca.
• Other FDM 3D printers: Compatible with most FDM 3D printers. Manual adjustment of printing settings may be required.
 

2. Is a Hardened Steel Hot End required when printing with Snapmaker PEBA 90A?

No, it is not required. However, please do note that nozzle sizes smaller than 0.4 mm are not recommended for Snapmaker PEBA 90A. Due to its high extrusion resistance, smaller nozzles significantly increase the risk of clogging. We recommend using a 0.4 mm nozzle or larger to ensure smoother extrusion, more stable filament flow, and reliable printing performance.

3. Does Snapmaker PEBA 90A require a Top Cover?

No. A Top Cover is not required when printing with Snapmaker PEBA 90A. However, we recommend using one, as it helps maintain a more stable printing environment and can reduce warping during printing.

4. How can I optimize print quality when printing Snapmaker PEBA 90A?

To improve print quality and reduce common printing issues, follow these recommendations:

• Load Filament Manually: Do not use an automatic filament feeder. As a flexible filament, PEBA 90A may experience feeding issues or nozzle clogging during automatic loading and unloading. Always load and unload the filament manually.
• Choose a Suitable Nozzle Size: Use a nozzle with a diameter of 0.4 mm or larger. Recommended nozzle sizes are 0.4 mm, 0.6 mm, and 0.8 mm. Do not use nozzles smaller than 0.4 mm.
• Disable Dynamic Flow Calibration: Turn off Dynamic Flow Calibration before printing to prevent compression and deformation of the flexible filament from affecting calibration results and print quality.
• Reduce Bubbles and Stringing: Bubbles or excessive stringing on the printed surface usually indicate that the filament has absorbed moisture. Thoroughly dry the filament at 75°C for 8 hours before printing again.
• Improve Overhang Cooling: If the surface of an overhang begins to sag, set the cooling fan to 100%. You can also orient the affected area toward the fan and move the model closer to it to improve local cooling.
• Prevent Excessive Build Plate Adhesion: PEBA 90A may adhere too strongly to the build plate, and removing the model directly may damage its bottom surface. Apply an even layer of glue stick to the build plate before printing. After printing, spray a small amount of alcohol around the contact area between the model and the build plate. Allow it to seep underneath the model before carefully removing the print.
• Improve Support Results: Use PETG or PLA as the support material for better overhang surface quality and easier support removal.

5. What are the recommended printing settings for Snapmaker PEBA 90A?

Parametro Recommended Setting

Temperatura dell'ugello

220–250°C

Temperatura del letto

90–100 °C

Ventola di raffreddamento

ON

Velocità di stampa

Up to 107 mm/s

Drying Before Printing

75°C for 8 hours

These settings are based on testing with a 0.4 mm nozzle. Actual printing conditions may vary depending on the nozzle diameter.
Note: Before printing, disable Dynamic Flow Calibration to prevent the compression and deformation of the flexible filament from affecting calibration results and print quality.

6. Do I need to dry Snapmaker PEBA 90A before printing?

Yes. PEBA 90A is sensitive to moisture and must be thoroughly dried before printing. Moisture absorption may cause surface bubbles, stringing, and other printing issues.
The recommended drying setting is 75°C for 8 hours.

7. How should I store Snapmaker PEBA 90A filament?

After opening, store the filament in a sealed container with desiccant. Keep the relative humidity below 20% during printing and storage, and avoid direct sunlight.
We also recommend drying the filament again before reuse.

8. Which build plates are compatible with Snapmaker PEBA 90A?

Piastra di stampa Compatibilità

Piastra in PEl testurizzata

Compatibile

Smooth PEl Plate

Compatible (Glue stick required)

Graphic PEl Plate

Non consigliato

Note: PEBA 90A may adhere too strongly to the Smooth PEI Plate, and removing the model directly may damage its bottom surface.
We recommend the following steps:
• Apply an even layer of glue stick to the build plate before printing.
• After printing, spray a small amount of alcohol around the contact area between the model and the build plate.
• Allow the alcohol to seep underneath the model before carefully removing the print.

9. What makes Snapmaker PEBA 90A different from TPU 90A?

Snapmaker PEBA 90A offers high rebound, lightweight properties, and fatigue resistance.
• Higher Rebound: PEBA 90A has a rebound rate of up to 70%, compared with approximately 37% for conventional TPU.
• Lightweight: With a density of 1.01–1.05 g/cm³, PEBA 90A can produce models up to 9.8% lighter than the same models printed with TPU 90A.
• Fatigue Resistant: It withstands repeated compression and bending, helping flexible parts maintain their shape and rebound.
• Low-Temperature Performance: It remains flexible and elastic at temperatures as low as −40°C, with less tendency to stiffen or become brittle.
In Snapmaker's internal materials testing, basketballs printed with PEBA 90A bounced significantly higher than identical models printed with TPU 90A under the same test conditions.

10. What can I make with Snapmaker PEBA 90A?

PEBA 90A is suitable for applications requiring flexibility, high rebound, lightweight properties, and fatigue resistance, especially in low-temperature environments.
Examples include:
• Sports Equipment: Airless basketballs and other sports equipment requiring high rebound.
• Wearable Parts: Sports guards, wrist supports, and other flexible protective gear.
• Winter Sports Gear: Flexible components designed to maintain elasticity and performance in low-temperature environments.

Snapmaker

PEBA 90A High Rebound Filament (RFID) - 800g

€72,99

Product Overview
• High rebound for sports ball prints
• Lightweight feel for wearables
• Durable flexibility for repeated use
• Flexible down to −40 °C

Online Tutorial
• See Snapmaker’s official wiki for printing instructions.

Cautions for Use
• Dry at 75 °C for 8 hours before printing.
• Use a hot end with a 0.4 mm or larger nozzle.
• PETG or PLA is recommended as support material.

Applicability
• 3D Printing

Supporto e impostazioni della stampante:
• Snapmaker U1: profili ottimizzati integrati in Snapmaker Orca.
• Altre stampanti: supporta la maggior parte delle stampanti 3D FDM; potrebbe essere necessaria una regolazione manuale.

Opzione

  • Jet Black(1F2329)
  • Pure White(FFFFFF)
  • Cool Grey(7E888D)
  • Vibrant Orange(FF7b00)
  • Bright Yellow(FFed00)
Visualizza il prodotto