Make with confidence.
Make with confidence.
Start printing, engraving or carving, something went awry, press the Snapmaker 2.0 Emergency Stop Button, and start fresh again. The Snapmaker 2.0 Emergency Stop Button is designed to provide an extra layer of safety for 3D printing, laser engraving, and CNC carving. Simply press the stop button and your operation will come to a halt.
Peace of mind.
Peace of mind.
The Snapmaker 2.0 Emergency Stop Button can be installed practically anywhere, which means you can easily access the stop button when it matters most. Imagine if you wanted to salvage your art piece or the bit was about to crash into the machine, you pressed the stop button without thinking and further potential harm was prevented.
Glowing status indicators for extra reliability.
Glowing status indicators for extra reliability.
The Snapmaker 2.0 Emergency Stop Button is under Safety Category 2 and connects to the main controller of the machine. It sends a stop signal to the controller at your command and has glowing status indicators, green for standby, red for activated, and alternating between green and red for connecting, so you know you are protected.
Power off
Standby
Power off
Standby
Activated
Connecting
Activated
Connecting
Sleek design you've always loved.
The Snapmaker 2.0 Emergency Stop Button carries the same design signature from the Snapmaker 2.0. The metallic grey finish gives it a sophisticated look and feel. Fully anodized aero-grade aluminum is the secret to its durability.
Everything is one.
Everything is one.
The Snapmaker 2.0 Emergency Stop Button is compatible with all current and future addons. Using the machine in combination with the Emergency Stop Button ensures an even safer working environment.
Tech Specs
| Snapmaker 2.0 Emergency Stop Button | Dimensions |
48 width × 40 depth × 68 height (mm), without conversion plate 48 width × 48 depth × 78 height (mm), with conversion plate |
| Weight | 0.2 kg |
| Rated Voltage | 24 V |
| Rated Current | 0.01 A |
Make with confidence.
Start printing, engraving or carving, something went awry, press the Snapmaker 2.0 Emergency Stop Button, and start fresh again. The Snapmaker 2.0 Emergency Stop Button is designed to provide an extra layer of safety for 3D printing, laser engraving, and CNC carving. Simply press the stop button and your operation will come to a halt.
Peace of mind.
The Snapmaker 2.0 Emergency Stop Button can be installed practically anywhere, which means you can easily access the stop button when it matters most. Imagine if you wanted to salvage your art piece or the bit was about to crash into the machine, you pressed the stop button without thinking and further potential harm was prevented.
Glowing status indicators for extra reliability.
The Snapmaker 2.0 Emergency Stop Button is under Safety Category 2 and connects to the main controller of the machine. It sends a stop signal to the controller at your command and has glowing status indicators, green for standby, red for activated, and alternating between green and red for connecting, so you know you are protected.
Power off
Standby
Activated
Connecting
Sleek design you've always loved.
The Snapmaker 2.0 Emergency Stop Button carries the same design signature from the Snapmaker 2.0. The metallic grey finish gives it a sophisticated look and feel. Fully anodized aero-grade aluminum is the secret to its durability.
Everything is one.
The Snapmaker 2.0 Emergency Stop Button is compatible with all current and future addons. Using the machine in combination with the Emergency Stop Button ensures an even safer working environment.
Tech Specs
| Snapmaker 2.0 Emergency Stop Button | Dimensions |
48 width × 40 depth × 68 height (mm), without conversion plate 48 width × 48 depth × 78 height (mm), with conversion plate |
| Weight | 0.2 kg |
| Rated Voltage | 24 V |
| Rated Current | 0.01 A |
Customer Reviews
Based on 31 reviews
71%
(22)
13%
(4)
10%
(3)
3%
(1)
3%
(1)
R
Der Button ist sehr hilfreich. Einfach zu installieren. Leider muss nach dem Reset das Gerät aus und wieder eingeschaltet werden.
W
YES ! The snapmaker motors are really strong and they can destroy not only material. Like each professional machine has to have a Stop Button it should be mandatory for such powerful tools.
J
Snapmaker 2.0 Emergency Stop Button
L
Snapmaker 2.0 Emergency Stop Button
K
Purchased the 350T since it was discounted and purchased the enclosure. So far so good. A few hiccups but support has taken care if me. Highly recommend the hardware, software needs work. Will work for basic needs but you will need to move on to something else for better results. Add ons are also a must.
