CNC Bits (5 bits)
High precision
Wide compatibility
Resistente al desgaste
High precision
Wide compatibility
Wear resistance
Descripción
General-purpose End Mill
With a shank diameter of 3.175 mm, the bits in this set are compatible with both Snapmaker Original and Snapmaker 2.0.
UF20 tungsten steel alloy
UF20 tungsten steel alloy with high hardness and wear resistance, providing a long service time.
Fresa de acabado plano
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Fresa de acabado circular
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.
Fresa de acabado plano
Typically used for roughing operations, cutting 2D shapes and flat-sided 3D shapes.
Fresa de acabado circular
With a round cutting edge, typically used for cutting curvatures and 3D shapes into materials.
Carving V-bit
With a narrow and sharp tip, used for carving intricate, detail-rich patterns.
Vitrinas
Astronaut (CNC Carving)
Wavy surface (CNC Carving)
Especificaciones
Flat End Mill (double cut)
Flat End Mill (single cut 3.175)
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
12 mm / 0.472 "
Cutting Diameter
3.175 mm / 0.125 "
Flat End Mill (double cut 1.5)
Fresa de acabado circular
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
12 mm / 0.472 "
Cutting Diameter
1.5 mm / 0.059 "
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
17 mm / 0.669 "
Cutting Diameter
3 mm / 0.117 "
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
12 mm / 0.472 "
Cutting Diameter
1.5 mm / 0.059 "
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
38 mm / 1.496 "
Longitud de ranura
17 mm / 0.669 "
Cutting Diameter
3 mm / 0.117 "
Carving V-bit
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
32 mm / 1.260 "
Angle
30 °
Diámetro de la punta
0.2 mm / 0.008"
Diámetro del tubo
3.175 mm / 0.125 "
Longitud total
32 mm / 1.260 "
Angle
30 °
Diámetro de la punta
0.2 mm / 0.008 "
* Warning:
• Make sure you have installed the bits correctly before starting, otherwise it may affect carving quality, cause damage or injury.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.
• Pay attention to Work Speed and Step Down to avoid potential risk of bit breaking or machine damage.