Power combination of creativity and safety.
Highly acclaimed Snapmaker 2.0 3-in-1 3D printer, now bundled with a high quality safety enclosure. Print, laser, and CNC using one machine and experience the ultimate making package.
They serve different purposes, but function as one.
Not only does the enclosure add an extra layer of safety, but it also provides a seamless experience of the Snapmaker 2.0 ecosystem. With one single cable, you have access to all the functionalities and settings directly on the touchscreen.
3-in-1
Modular
Expandable
High Quality
Auto Leveling
Auto Focus
Filament & Power Recovery
5-inch
Touchscreen
Custom
Software
Door Detection
Solid Protection
Stable
Environment
A 3D printer that does not one, not two, but THREE functionalities.
3D printing.
A newly designed cooling system, quick release hot end mechanism, and improved extrusion components in combination elevate the printing quality and consistency.
The 3D printing module supports dozens of materials. You can choose a layer thickness between 0.05 and 0.3 mm. It meets all your needs.
Auto Leveling
Equipped with a proximity sensor, Snapmaker 2.0 can automatically calibrate the heated bed. You can also switch to Manual Mode to calibrate every single point.
Filament Runout Recovery
A filament runout sensor detects the filament status and pauses the machine if the filament runs out. Put in new filament and resume making from the touchscreen.
Power Loss Recovery
Snapmaker 2.0 allows you to quickly resume the interrupted job after a power outage. Simply tap on the touchscreen to resume where it left off.
Stable environment
Ambient temperature is consistent during the printing process. So when you print with ABS, your print is less likely to warp.
Laser engraving and cutting.
The 1600 mW laser module can engrave and cut materials such as wood, leather, and plastic.
The built-in camera enables the Auto Focus and Camera Capture features, which means you can spend less time focusing the laser and get the optimal engraving results more easily.
Auto Focus
Different engraving results at different laser heights are shown without you repeatedly testing for the focal point. The optimal laser height is used automatically.
Camera Capture
The camera automatically takes a picture of the material and uploads it to Snapmaker Luban as a canvas. You can import and edit an image on the canvas directly, then engrave the final image shown in the software with a click. What you see is what you get.
Laser reduction
The panels and doors of the enclosure are made of brown acrylic, which protects you from the laser. The bundle also comes with a pair of OD6 laser safety goggles.
Fume extraction
A controllable fan extracts fumes generated during the laser engraving process.
CNC carving.
The new CNC module uses an ER11 collet, has better concentricity, and outputs more precise and consistent results. You can swap the collet to different sizes and the module is compatible with CNC bits ranging from 0.5 to 6.35 mm in diameters, allowing you to create on a variety of materials.
Choose a spindle speed between 6,000 and 12,000 RPM and work with different materials and projects with ease.
CNC carving platform
The MDF CNC carving platform ensures the accuracy of carving.
Noise reduction
The enclosure reduces the noise level by up to 10 dBA*. Your CNC experience is no longer unbearably loud.
All metal frames.
Both the machine and enclosure use aero-grade aluminum alloy, which brings a new visual experience and provides better cooling and higher rigidity.
Modular design.
Snapmaker 2.0 uses the CAN (Controlled Area Network) bus system, which is widely adopted in car and industrial automation. The machine can work with different modules and transform to different functionalities.
Unbounded customization.
The modular design means that you can switch to different functionalities on the fly. All ports are standardized and more addons will be released in the future.
Responsive 5-inch
touchscreen.
An android based touchscreen with a 4-core high performance processor makes you speed through navigation like you would on a modern smartphone. It supports OTA (over-the-air) upgrades so you can enjoy the latest features as soon as they come out.
3-in-1 software.
Create G-code files and control your Snapmaker 2.0 using our custom slicing software Snapmaker Luban. Use the pre-set settings to skip convoluted adjustments and testing to start making right away.
Wi-Fi remote control.
Connect and control your Snapmaker 2.0 through Wi-Fi using Snapmaker Luban and send files wirelessly.
Door detection.
The machine automatically pauses when either or both doors are opened during laser engraving or CNC carving.
LED strips.
Controllable LED strips let you see your work and all its details.
This is the ultimate making experience of Snapmaker 2.0 platform.
Put them anywhere, any place. No matter if they are in your basement, garage, or workshop. They always look stunning and are safe, thanks to the enclosure.
3 sizes, 3 combos.
Specifications
3D Printing
Build Volume (W × D × H)
320 × 350 × 330 mm
Heated Bed Temperature
Up to 80°C
Laser Engraving and Cutting
Work Area (W × D)
320 × 350 mm
CNC Carving
Work Area (W × D × H)
320 × 350 × 275 mm
Frame Material
Aluminum alloy
Connectivity
Wi-Fi, USB cable, USB flash drive
Touchscreen
5", Android OS, Quad Core A7 CPU @ 1.1GHz
Supported Software
Snapmaker Luban or third-party software
Supported File Types
.stl, .obj, .svg, .jpeg, .png, .bmp, .dxf, more formats to be added
Supported OS
MacOS, Windows, Linux
Rated Power
320 W
3D Printing
Layer Resolution
50–300 microns
Nozzle Diameter
0.4 mm
Nozzle Temperature
Up to 275°C
Supported Materials
PLA, ABS, PETG, TPU, wood filled PLA, more being tested
Laser Engraving and Cutting
Camera
Built-in camera
Laser Power
1600 mW
Wavelength
450 nM
Safety Class
Class 4
Supported Materials
Wood, leather, plastic, fabric, paper, non-transparent acrylic, more being teste
CNC Carving
Shank Diameter
0.5–6.35 mm
Spindle Speed
6,000–12,000 RPM
Supported Materials
Wood, acrylic, PCB, carbon fiber sheet, jade, more being tested
A150 Enclosure
A250 Enclosure
A350 Enclosure
*Noise reduction was tested under controlled conditions.
Power combination of creativity and safety.
Highly acclaimed Snapmaker 2.0 3-in-1 3D printer, now bundled with a high quality safety enclosure. Print, laser, and CNC using one machine and experience the ultimate making package.
They serve different purposes, but function as one.
Not only does the enclosure add an extra layer of safety, but it also provides a seamless experience of the Snapmaker 2.0 ecosystem. With one single cable, you have access to all the functionalities and settings directly on the touchscreen.
3-in-1
Modular
Expandable
High Quality
Auto Leveling
Auto Focus
Recovery
Touchscreen
Software
Door Detection
Solid Protection
Environment
A 3D printer that does not one, not two, but THREE functionalities.
3D printing.
A newly designed cooling system, quick release hot end mechanism, and improved extrusion components in combination elevate the printing quality and consistency.
The 3D printing module supports dozens of materials. You can choose a layer thickness between 0.05 and 0.3 mm. It meets all your needs.
Auto Leveling
Equipped with a proximity sensor, Snapmaker 2.0 can automatically calibrate the heated bed. You can also switch to Manual Mode to calibrate every single point.
Filament Runout Recovery
A filament runout sensor detects the filament status and pauses the machine if the filament runs out. Put in new filament and resume making from the touchscreen.
Power Loss Recovery
Snapmaker 2.0 allows you to quickly resume the interrupted job after a power outage. Simply tap on the touchscreen to resume where it left off.
Stable environment
Ambient temperature is consistent during the printing process. So when you print with ABS, your print is less likely to warp.
Laser engraving and cutting.
The 1600 mW laser module can engrave and cut materials such as wood, leather, and plastic.
The built-in camera enables the Auto Focus and Camera Capture features, which means you can spend less time focusing the laser and get the optimal engraving results more easily.
Auto Focus
Different engraving results at different laser heights are shown without you repeatedly testing for the focal point. The optimal laser height is used automatically.
Camera Capture
The camera automatically takes a picture of the material and uploads it to Snapmaker Luban as a canvas. You can import and edit an image on the canvas directly, then engrave the final image shown in the software with a click. What you see is what you get.
Laser reduction
The panels and doors of the enclosure are made of brown acrylic, which protects you from the laser. The bundle also comes with a pair of OD6 laser safety goggles.
Fume extraction
A controllable fan extracts fumes generated during the laser engraving process.
CNC carving.
The new CNC module uses an ER11 collet, has better concentricity, and outputs more precise and consistent results. You can swap the collet to different sizes and the module is compatible with CNC bits ranging from 0.5 to 6.35 mm in diameters, allowing you to create on a variety of materials.
Choose a spindle speed between 6,000 and 12,000 RPM and work with different materials and projects with ease.
CNC carving platform
The MDF CNC carving platform ensures the accuracy of carving.
Noise reduction
The enclosure reduces the noise level by up to 10 dBA*. Your CNC experience is no longer unbearably loud.
All metal frames.
Both the machine and enclosure use aero-grade aluminum alloy, which brings a new visual experience and provides better cooling and higher rigidity.
Modular design.
Snapmaker 2.0 uses the CAN (Controlled Area Network) bus system, which is widely adopted in car and industrial automation. The machine can work with different modules and transform to different functionalities.
Unbounded customization.
The modular design means that you can switch to different functionalities on the fly. All ports are standardized and more addons will be released in the future.
Responsive 5-inch
touchscreen.
An android based touchscreen with a 4-core high performance processor makes you speed through navigation like you would on a modern smartphone. It supports OTA (over-the-air) upgrades so you can enjoy the latest features as soon as they come out.
3-in-1 software.
Create G-code files and control your Snapmaker 2.0 using our custom slicing software Snapmaker Luban. Use the pre-set settings to skip convoluted adjustments and testing to start making right away.
Wi-Fi remote control.
Connect and control your Snapmaker 2.0 through Wi-Fi using Snapmaker Luban and send files wirelessly.
Door detection.
The machine automatically pauses when either or both doors are opened during laser engraving or CNC carving.
LED strips.
Controllable LED strips let you see your work and all its details.
This is the ultimate making experience of Snapmaker 2.0 Bundle.
Put them anywhere, any place. No matter if they are in your basement, garage, or workshop. They will always look stunning and are safe, thanks to the enclosure.
3 sizes, 3 combos.
Specifications
Frame Material
Aluminum alloy
Connection Type
Wi-Fi, USB cable, USB flash drive
Touchscreen Specs
5", Android OS, Quad Core A7 CPU @ 1.1GHz
Supported Software
Snapmaker Luban or third-party software
Supported File Types
.stl, .obj, .svg, .jpeg, .png, .bmp, .dxf, more formats to be added
Frame Material
MacOS, Windows, Linux
Rated Power
320 W
3D Printing
Layer Resolution
50–300 microns
Nozzle Diameter
0.4 mm
Nozzle Temperature
Up to 275°C
Supported Materials
PLA, ABS, TPU, PETG, wood filled PLA, more being tested
Laser Engraving and Cutting
Camera Type
Built-in camera
Laser Power
1600 mW
Wavelength
450 nM
Safety Class
Class 4
Supported Materials
Wood, leather, plastic, fabric, paper, non-transparent acrylic, more being teste
CNC Carving
Shank Diameter
0.5–6.35 mm
Spindle Speed
6,000–12,000 RPM
Supported Materials
Wood, acrylic, PCB, carbon fiber sheet, jade, more being tested
A150 Enclosure
A250 Enclosure
A350 Enclosure
*Noise reduction was tested under controlled conditions.